General :: Kernal Panics Not Syrcing - Host Smbus Not Enabled
Mar 30, 2011
I tried to install Zenwalk, xunbutu, debian6 linuxmint, linuxpuppy and I've had nothing but Kernal panics not syrcing, host smbus not enabled, lupusave file problems, journal commit i/o error. I've been interested in linux for a long time and I was reading about it working well on old computers. Ive got a 366 celeron with a 4G drive and 160M memory (a real screamer). This computer has had win98 winME and win2K with flawless installations. I'm no expert at this stuff but I've been around since the DOS 3.3 days so I know a little bit. All I want to do is see my hard drive boot up in the linux operating system right now. What the heck is up with this file system?
View 8 Replies
ADVERTISEMENT
Jun 4, 2011
What does the message spilled out on start meansIt says something likeSMBus not enabled. Upgrade BIOS or use force=1.i can't upgrade bios. So what does the message mean and how do i use force=1 ? where do i put this command?
View 5 Replies
View Related
Aug 24, 2010
I am using redhat linux enterprise linux 5, how to find out the linux kernal version and kernal configuration file location .
View 2 Replies
View Related
Sep 14, 2010
How i can do disable support SMBus for kernel? What is parameters of kernel-config do enable SMBus?
View 2 Replies
View Related
Jan 23, 2011
My friend's PC recently started acting up. He had me install Sabayon on it and everything was fine until a few days ago. Every app I try to run after the PC boots results in a segmentation fault. I figured maybe something was wrong with the HDD, so I tried to boot from a DSL liveCD to run fsck, but it wouldn't boot; it freezes right away. I then tried the Sabayon LiveDVD and got a kernel panic.Does anyone have any idea what the problem could be? I am completely clueless; I've never had anything like this happen before.
View 3 Replies
View Related
Jun 21, 2010
After building a new system I have been getting kernel panics randomly. I have been able to look at /var/log/messages and determine that either my RAID card, XFS, or something along those lines is causing the problem. It has now gotten bad enough that any heavy use of the RAID will cause it to panic and die.
There is one large file on this that I need which is not on my backups but when I try to get it off, the transfer will cause a kernel panic within minutes. What is causing the panic? Is there any way to resolve it? The RAID card is an LSI SAS3081E-R and I am using the built in drivers/modules within Ubuntu 10.04 x64 (pretty sure the kernel itself has the driver included). There is source available for the driver from LSI's site but I'm not sure if that will solve the problem and in addition to that, I can't figure out how to compile and install it. It has a Makefile already but make just complains "no targets".
Code:
Jun 21 13:00:22 cyan kernel: [ 706.206498] ffff88019652daf8 ffff88018ff61698 ffff8801935ddd50 ffffea00038f6650
Jun 21 13:00:22 cyan kernel: [ 706.206472] Process xfsdatad/2 (pid: 862, threadinfo ffff8801935dc000, task ffff88019652dac0)
[Code]...
View 14 Replies
View Related
Feb 12, 2011
Embedded ystem specs: see below.
Also:
Problem: no /dev/i2c-0 present
Question: how to use user space i2c/SMBus when I cannot open + utilize devices on the smbus?
For example: smbus_fd = oepn("/dev/i2c-o", O_RDWR) cannot be done since '/dev/i2c-o' does not exists nor is it attached to the i2c-bus (see tree below).
View 1 Replies
View Related
Oct 5, 2010
As everyone know, the checksum of PEC in Sbus is CRC-8, but in my project, the checksum way is zero-checksum, the SMBus read transaction as below.
View 2 Replies
View Related
Mar 2, 2011
Do I need to install a Kernal in a Dell laptop that is a few years old in order to run Linux? If so, how do I go about the installation process?
View 3 Replies
View Related
Dec 1, 2009
I installed Slackware 8.1 thinking that it was the earliest version to support flash drives (based on some forum discussions I had read), but then discovered Wiki info on flash drives which states that the 2.6.2 kernal is the first kernal to support them. Is it possible to load 2.6.2 into Slackware 8.1 or does this following link the highest kernal I can go with 8.1? [URL]
View 4 Replies
View Related
Jan 24, 2010
How to write a cd or dvd in kernal mode?how to make a image file and write it in dvd or cd in kernal mode? I'm using redhat 5......
View 2 Replies
View Related
Jan 7, 2011
I am Vamsi from Alcatel-Lucent. We have a software to configure the wireless broadband devices to the Linux machine. Till now, it was running on FC-5. When we need to add any new device, we used to add it in airprime.c, sw.h and usb-serial.c under /usr/src/linux/drivers/usb/serial directoy.
Now we are trying to upgrade the system to FC-12. But I am not able to find any kernal files under /usr/src/kernels/2.6.31.5-127.fc12.i686.PAE/drivers/usb/serial directory. I saw in some websites that the kernal files can be found at: /root/rpmbuild/SOURCES/linux-2.6.31/drivers/usb/serial. But in my system, there is no rpmbuild directory.
View 4 Replies
View Related
Oct 14, 2010
steps for implementing vcp protocol in linux kernal module
View 1 Replies
View Related
Jan 6, 2011
I have installed the tux-3.2.18-9.fc6.i386.rpm succefully in CentOS 5. I have got the following error, when I apply the patch tux3-2.6.18-1 to the kernal.
[Code]...
View 4 Replies
View Related
Apr 7, 2011
I was unable to access the server and had to reboot it. When the server was booting after the Grub, it errored out withKernal Panic -not syncing Attempted to Kill init!!exec of init (/sbin/init/) failed No such directoryI reboot into the recuse mode from the CD and when looking for the installed OS.I got an error like thisFound OS but with errors.Mounting part or all of your system at /mnt/sysimage.. something of the sort. I've run fsk -y on the /boot and root drives and rebooted but still the same issues.Here is my grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code].....
View 7 Replies
View Related
Oct 20, 2010
I have two servers, one has an empty / and the other has a subdirectory with a large number (4 gig) with many, many files. I need a way to transfer the files en masse from the server with the large number of files to the one that is essentially blank.I don't have space on the used host to simply gzip all the files. I've googled this and see that there may be some combination of tar and/or gzip that will let me do this with some sort of redirection.
I really need and example line of how this can be accomplished. If my explanation seems rather sparse, I can supply more details.
View 3 Replies
View Related
Mar 9, 2011
I'm trying to ssh from my laptop to my desktop (both fedora 14) over a local network. I can ping my desktop and get responses, but if I ssh to it, I receive
ssh: connect to host 192.168.100.xxx port 22: No route to host
I can ssh from the desktop to itself.
View 4 Replies
View Related
Oct 20, 2010
HOW TO GET THE IP ADDRESS OF HOST IN LINUX WITH USING OF HOST AND NSLOOKUP COMMAND and after getting the ip address how to assign it in the variable
View 4 Replies
View Related
Jun 7, 2010
I recently installed new hard drive and cloned old hard drive software onto it. The bootloader installs either linux or other operating system. Ever since the cloning, boot hangs. Words in the thread title are the last to appear before everything grinds to a halt. Just before the kernal panic message appears, "Initrd finished" is last line. Will have to try booting again to find more info before this.
View 7 Replies
View Related
Jan 26, 2010
Is anyone else having trouble with frequent kernel panics whenever the Transmission bittorrent client is running? I get them after about 1-2 minutes of having transmission running, and need to do a hard reset. I didn't restart transmission this last time and it has been almost 10 minutes with no problems. I've been having problems left and right with KPs since around 8.04 but previously they were infrequent enough that it was still more convenient than using windows...Every 2 minutes is ridiculous though, if I can't fix it I'm going to need to get another torrent client!
View 3 Replies
View Related
Feb 17, 2011
I just built a computer with these specs:
Asus P7P55D-E Pro Mother Board
2 x 4gb GSkill RipJaw 1333
Intel Core i5-760 cpu
MSI nVidia GeFore GTX-460 Video Card
When I try to boot from a live CD/USB I always get some sort of kernel panic, most times about USB controllers and other times about cpu_idle. I have pictures of these that I can post but nothing from any logs because this is happening even before I install. I have left memtest running over night for 11 hours and had no problems, I have tried to boot with only one stick of memory, I have changed the video card to a GeForce 8800 and I have tried everything on a different motherboard and still no luck. Would I wrong to say that there is a problem with the CPU and should I return it? My only problem with all of this is that Windows installs perfectly fine on the computer with zero problems...weird.
View 1 Replies
View Related
May 10, 2011
I have been a happy Ubuntu and other distros user from 2007 to now. Had my old 7.10 Gutsy Gibbon (Ubuntu Studio actually) that I really felt was time to upgrade. Then I downloaded the ISO image for 11.04 Natty Narwhal past 4 day ago. It gave me an option to install on my old 7.10, upgrading it, then I chose that one not to have to lose my data.
At the very end of the installation (when downloading several packages from the net) I got a kernel panic.
After that I reinstalled from zero wiping the whole partition, with the same results. It only worked when I disconnected the net cable so it wouldn't download anything during install. Then I could run the 11.04, but kept getting kernel panics, and after some testings (I thought it was the nvidia video drivers at first) I think it happens after some ammount of network traffic happens.
Memtest went normal, I tried logging with no-effects and I tried some solutions from forums with no results. The pc can be on and working for hours, but after I start surfing the web for some time, I get a freeze. Sometimes Caps Lock and Scroll Lock leds are flashing, and sometimes just freezes to simply become unresponsive. When it was during the installation I got a message saying it would pop out into console because panic occured and then froze. Anyway I always have to press the reset button.
I would like to be sure if I have some of my hardware broken or if the newest kernel is still green on some hardware support; maybe network. I'd also like to know if I can install older versions of the kernel; I think that should fix the problem because other distros worked perfectly here before. I also heard about some kernel-image-pae being different from the ordinary kernel image. Could it help if I change that package? I'm waiting to install 11.04 in my wife's computer also but of course I don't want to bring any problems on her! My net card is Nvidia Nforce and my processor is AMD Athlon II X2 with a GForce 9400 for video card.
View 4 Replies
View Related
Apr 29, 2009
I'm trying to use and old Dell Dimension 2350 workstation with 1GB of RAM and a 200GB drive as a home server. I boot the CentOS 5.3 install DVD, get to the splash screen and hit ENTER to start the install. The install routine starts and then kernel panics with a very long trace I can't make sense of. I've used the DVD for other installs so I know the media is good.Are there any known quirks to installing linux on a Dimension 2350? Maybe some kernel line parameters like no acpi?? As a test, I took an Ubuntu server cd, and the install actually completed but on reboot it kernel panicked with a similar long trace error. Obviously this is most likely a hardware issue.
View 4 Replies
View Related
Jul 8, 2009
I'm running CentOS 5.3 x86_64 on my laptop (dell vostro 1400, core2duo, 3GB RAM, intel 3945ABG wireless, nvidia video and LAN). The problem is that some times (like 15-20% of times) I shutdown the laptop, I get a kernel panic related always to the wireless kernel module (I haven't been able to get screenshot or anything). I'm using the latest centosplus kernel. I never get these panics with the standard CentOS kernel, however the standard kernel doesn't light the wireless led, and that annoys me a lot. Therefore I'm forced to use centosplus kernel. The question is not how to solve this (i know I've not given enough details) but what to do to diagnose better the cause of the panic and then correct it.
View 3 Replies
View Related
Aug 5, 2009
What do host.allow and host.deny do exactly? what are they??
View 3 Replies
View Related
Feb 23, 2010
I've been trying to install fedora 12 on my laptop, however, I've been running into kernel panics on both the live cd and the install dvd. I'm using an HP HDX16 with an Intel Core Two Duo T9400 @ 2.53ghz, and a Nvidia Geforce 9600M GT. Dunno if any other hardware might be involved. Here's the text I get on my screen:
Code:
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
DMAR; Host address width 36
DMAR: DRHD base: 0x0000000000000000 flags: 0x1
IOMMU 0: ver 0:6 cap f00021a4f000e2c3 ecap f000ff54f000ff53
DMAR:RMRR base: 0x89dc9ff649ff77fd end: 0xf4ffdefe05fcfbffe
DMAR: No ATSR found
DRHD: handling fault status reg f0002198
Kernel panic - not syncing: DMAR hardware is malfunctioning
Pid: 1, comm: swapper Tainted: G W 2.6.31.5-127.fc12.i686 #1
Call Trace:
[<c0764636>] ? printk_0x14/0x16
[<c0764580>] panic+ox3e/0xe0
[<c05b4ce3>] __dmar_enable_qi+0xbc/0xd3
[<c05b52d1>] dmar_enable_qi+0xe9/0xf3
[<c09aaecc>] init_dmars+0x1c7/0x5fb
[<c08fb6b4>] ? pci_iommu_init+0x0/0x11
[<c09ab50e>] intel_iommu_init+0x20e/0x2b6
[<c098f6bc>] pci_iommu_init+0x8/0x11
[<c0401143>] do_one_initcall+0x51/0x13f
[<c0989372>] kernel_init+0x19c/0x1ed
[<c09891d6>] ? kernel_init+0x0/0x1ed
[<c04041a7>] kernel_thread_helper+0x7/0x10
View 1 Replies
View Related
Jul 22, 2010
Since the update to 11.3 i'm getting kernel panics randomly. Because the X server freezes and I can only force an "unexpected reboot", there is not much information I have. I installed kdump and activated it with the Yast module. I'm collecting dump files, now. But I'm not sure what to do with does files.
View 7 Replies
View Related
Jan 4, 2010
F12 Clean Install stopped with line:
[<c04041a7>] kernel_ thread_helper+0x7/0x10
The machine has completed more than 30 hours of HD cleaning with DBAN (overwrites the HD). It used to be able to run F9 or Ubuntu 8.04 but always returned kernel panic during other distro installation attempts. Why after a complete HD clean though?
View 11 Replies
View Related
Sep 22, 2010
I have this weird issue which only appears when I am using 64 bit Ubuntu. Every now and then my laptop seems to go into a kernel panic (system unresponsive, numlock and scrollock lights flash repetitively) only when I am using the broadcom wireless. I can connect to my wireless router and use the internet and local network, but eventually, kablamo, crash, bang, boom. The only way out of the crash is to power off completely. After repowering, the wireless network is fine until the next crash. There does not seem to be a pattern or time period to cause this crash either. I have purged network manager(which I couldn't get to use my wireless) and am using wicd, which allows me to connect wirelessly.
Here is the details of my system:
Dell inspiron 1520
lspci (snipped)
0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
[code]....
View 1 Replies
View Related
Apr 7, 2011
Server is 10.04 server edition
[code]...
soon kernel panics. What else to fix here?
View 3 Replies
View Related
