General :: Internet Obstacle With VirtualboxXP In Karmic
Mar 8, 2010
I've succesfully installed Virtualbox, and installed XP in it,running well.But no internet. Doesn't see HUAWEI usb modem.I've looked around, but nothing has worked. Someone says, just have net connected before going in to VM, but no.And NAT is the network setting, as it seems it should be.Out of ideas right now.Do you have one maybe?One glitch in installing XP was lack of ServicePack2 disk, and it said it needed it for iexplore. I just carried on. Relevant?(This is all to get my ex-XP WindozLiveBackup files reconstructed with their Restore program! It's a curly path, but I'm learning things, I sure wouldnt have guessed even 2 months ago that I'd be messing with VMs now.) Linux is groovy.
View 14 Replies
ADVERTISEMENT
May 3, 2010
Why can't i get internet with lucid or karmic, but have no network problems on previous verisons of ubuntu?
View 4 Replies
View Related
Feb 24, 2010
I have a Dell Latitude D620 which came with Windows XP. I have just installed Ubuntu 9.10 on the laptop so it can dual boot but I can't connect to the internet.I have a dynamic IP allocated by my broadband service provider which I access by a wired Netgear DM111P router (not cable). It still works fine when booting up windows.I've read through lots of posts by others trying to find a solution as the 9.10 install has just been done and I've not changed anything.
My tentative assessment is the laptop, when running Ubuntu, is not communicating with the router as there seems to be no IP address allocated by the router.
View 4 Replies
View Related
Sep 6, 2010
I'm using Ubuntu Lucid Lynx on a MSI Wind U100 Netbook, and most of the time (say 9 times over 10), my computer can't connect to Internet, be it with an ethernet cable or wifi. I have heard of similar problems with Ubuntu Karmic and kernel 2.6.27, but mine is 2.6.32, so I didn't try the solutions I've found across the web, fearing to break more than anything else.
What I can say is that before running Lucid, the netbook was running Hardy, and ethernet used to work fine whereas WiFi absolutely not (but I didn't try too hard to make it work).
View 2 Replies
View Related
Mar 6, 2010
Did anyone shared internet via bluetooth in karmic koala 9.10?
View 1 Replies
View Related
Apr 17, 2010
I did an upgrade over the internet and on rebooting after it had completed there was no internet connection. I wired in an ethernet cable and although I can access the router and ping another machine on the network, there is no internet connection.
View 7 Replies
View Related
Feb 4, 2010
After trialling ubuntu on my home comp, and getting brilliant results, i've now migrated my work computer too. Now, i can't connect to the internet or office network. I'm on a small office wired network. When i was on XP all the settings were on 'utomatic' - didn't need to input an IP, DNS, subnet etc. Now i Can't even ping the router.I've browsed around various other threads and can't find a working solution. I've tried inputting various settings in ubuntu connection settings, but still cannot get it working. (was hoping it would be automatic, as it was on my home comp).
View 1 Replies
View Related
Apr 1, 2010
This morning my Karmic desktop stopped connecting to the internet (Firefox & Evolution). Network is all ok and other machines can connect fine - in fact I am typing this from a Windows 7 virtualbox running on the offending machine. Investigation shows that this is definitely a DNS problem as I can connect to sites / mailservers by using the ip address. Have tried several reboots which did not help. PowerDNS is installed. When I restart it the ff output is send to syslog:
[Code]...
View 2 Replies
View Related
Feb 12, 2010
I'm trying to set up my internal network to use my Karmic computer as a gateway to get my girlfriend online, but I'm having some issues. I've seen a few tutorials online and saw Firestarter mentioned, since it was supposed to do what I wanted, I figured I'd give it a try.I went through the setup wizard, set wlan0 as the internet connection and set eth0 as the network to which it should share my internet connection. Unfortunately when I started it up I got the error that eth0 wasn't ready.
I know it's a bit complicated but she doesn't want to haul her computer upstairs or to the other side of the house to connect to the upstairs router nor does she want to buy a better antenna like mine, and I don't want to route ethernet cable through the house because I'm lazy. Since I know this can be done through software with the setup I have, I want to do it.I think one problem has to do with too many DHCP servers (both wireless routers have DHCP on and I can enable it on my desktop, but I'm not sure which ones to turn on or off) and I think somewhere in this network I need to set a static IP for her at least desktop if not both desktops..So I've been through a few configs and I haven't had any luck so far but none of them were necessarily according to howtos, rather they were how I gathered it should all be setup from research.
View 5 Replies
View Related
Jan 21, 2010
What's the right direction or give me step by step on how to do this?
View 6 Replies
View Related
Apr 22, 2010
Anytime I turn my computer on, I get to the GRUB loading screen, select anything and then it shuts down again. I don't think I've really done anything that might have caused this? I only (re)installed it yesterday and the only things I've touched since then are ndiswrapper and wicd to get my internet working. Last night, I just let it idle out and now this. There are no dvds/cds inserted, nor any flashdrives.
View 2 Replies
View Related
Jan 21, 2010
I've got a Dell M90 with an NVidia Quatro FX 3500 gpu. In Windows it would idle at around 45degrees. In Ubuntu 9.1 it idles at 65. Doing anything at all takes it up to 75-80 and playing a 3d game takes it to 90 withing a couple minutes.
View 10 Replies
View Related
Nov 26, 2009
I'm running a dual boot with Windows XP and Ubuntu 9.04. I have a 2002 gateway machine with a 2GHz processor and 1.25GB of RAM and a 40GB Hard Drive. My graphics is onboard Intel. Whenever I try to install Ubuntu 9.10, the screen will inevitably freeze up on me. The last kernel I tried was 2.6.31-15. Usually I'm running pogo games (a java application) along with internet radio. When the radio cuts out, I know I'm in trouble. When it freezes up, the mouse will move around but nothing is "clickable". I can move it around, click it on things, even try CTRL-ALT-DEL // CTRL-ALT-F2 //or even CTRL-ALT-BACKSPACE or CTRL-ALT-ESC.
(So it's not like I can find the offending process and kill it because everything is frozen up). Nothing works except pulling the plug on my computer. I was told I could "create" an xorg.conf file since it no longer exists with karmic. But when I tried this, I could no longer get past the GRUB menu. It threw me from the grub menu to a terminal screen. I have no idea whether I can get the system to boot from the terminal screen. Is there a way to create a new xorg.conf file that won't disable my computer?
View 1 Replies
View Related
Aug 11, 2010
I honestly don't know what happened. I just checked the folder that the code was normally in and it's gone I don't have it backed up either. Is there any way I can get it back??
View 3 Replies
View Related
Apr 1, 2010
why dont lmms work on ubuntu karmic 9.10?
View 2 Replies
View Related
Jan 26, 2010
I have a freshly installed Ubuntu Karmic 32 bits installed in an old machine (Pentium 4 512 Mb RAM) and I'm having a severe problem with apt-get. No matter what repository I choose, I can't update the repository files. I get the following error during a apt-get update:
Hit http://br.archive.ubuntu.com karmic-updates/universe Sources
Hit http://br.archive.ubuntu.com karmic-updates/multiverse Packages
Hit http://br.archive.ubuntu.com karmic-updates/multiverse Sources
96% [4 Sources bzip2
[Code]...
View 2 Replies
View Related
Aug 30, 2010
I could not keep this question from turning into a wall of text so I broke it up into these 4 sections.I have 2 monitors (DELL E228WFP and a DELL 2007FP) hooked up to a EVGA E-GEFORCE 8800GT 600MHZ 512MB 1.8GHZ DDR3 PCI-E Dual DVI-I video card. I would like to have the DELL 2007FP set up to the left of the DELL E228WFP and rotated into "portrait" mode^ with both screens sharing a common bottom edge.
This is ideal for reading PDF documentation or papers on one screen and then working on the second one.Steps Undertaken I installed the NVidia drivers (via sudo apt-get install nvidia-current) rebooted ran nvidia-xconfig then ran nvidia-settings. However, like many people, I could not get nvidia-settings to write to my config file despite having run it with kdesudo. Instead, I opened the file with Kate (using KDESudo) and then used the preview from nvidia-settings and just copy pasted it into the file and saved it like that. if I use TwinView I have both monitors working, but when I try to use krandrtray to rotate one of them, it is shown as one large monitor so I cannot rotate just the one I want rotated.However, if I set them up as separate X windows the second one is black and krandrtray only shows the main monitor. I am at a loss of what to try next.
View 1 Replies
View Related
Aug 2, 2010
I am running Kubuntu and want to install windows xp or 7 and run both
View 9 Replies
View Related
Apr 14, 2010
I had some problems with printing pdf on my HP 1020 (it was printing only text, but not figures or pictures). After reinstalling a few times, I realised that problem was not the driver, but the type of pdf format. Some pdf creator (like>cairo, or some creators for Windows) has format which can not be parsed on Ubuntu. Workaround is to 'print to a file' (postscript), save it somewhere and then print that new postscript document.
View 2 Replies
View Related
Mar 15, 2010
I deciphered that I would have to change the /etc/fstab and grub.conf.
So the question is:
1: Which files must I edit?
2: How do I edit grub.conf to use the sdX scheme?
View 7 Replies
View Related
Mar 11, 2010
I need a program which generates events when a file is moved, removed or its extended attributes are changed. I'm running Ubuntu Karmic Koala 32-bit desktop.inotify is the standard solution for such problems, but inotify cannot install a recursive watch, so the only option is to the equivalent of find on the filesystem, and add an inotify watch on each node. This is what e.g. inotifywatch does. This won't work for me, because my filesystem has 1 million files, and installing watches to all of them takes forever.
fanotify could work except that I would have to patch the kernel for that (I'm currently running 2.6.31-20), and maintaining patches to the Linux kernel is beyond my time commitment.I used to use rfsdelta (whose kernel module is similar to rlocate), but it just doesn't compile on 2.6.31, because it uses obsolete Linux security framework APIs.
View 1 Replies
View Related
Feb 11, 2010
I've been trying to get Grub 2 to work on a desktop system I'm trying to install Karmic Koala on. It's currently got two similar hard drives, which I've partitioned into a small /boot partition and the rest as a large general partition. Both are fd (linux software RAID) types. I boot from the Ubuntu live CD then create the RAID arrays as RAID 1 (requires installing mdadm to work). Then I start the arrays and begin the install.
I select manual partitioning and create the first RAID array (/dev/md0) as an ext4 /boot. The second array (/dev/md1) requires a new partition table. I then partition it as 20G for /, 2G for swap and the rest as /home, giving me /dev/md1p1, /dev/md1p2 and /dev/md1p3. When the install finishes, I mount the various partitions in /mnt (for /dev/md1p1) and below, including binding /dev and /proc. Then I chroot and install mdadm in the new system. I update grub, re-install it on /dev/sda & /dev/sdb then update the initramfs.
A quick reboot and things go wrong... Grub boots me into a recovery console. Apparently it can't see the partitions in the second RAID array. how to get Grub 2 and/or mdadm to work in this situation? I know that apart from the RAID, the above process worked to allow me to set up a Grub 2 boot on an antique laptop with an incomplete install.
View 20 Replies
View Related
Jan 30, 2010
Manually mount or fix my external hard drive. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drive from Iomega. When I plug it in, a message appears that reads:
"Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb2,missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg | tail or so".
Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received the following:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Partition table entries are not in disk order
View 2 Replies
View Related
Sep 3, 2010
Earlier this year I encountered a problem with my external hard drive; it would not mount automatically and I kept getting an error message. Last time I was able to fix it by typing in the terminal 'sudo fsck /dev/sdb2'. Once again it's not mounting automatically and I'm not even getting the error message. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drivefrom Iomega. Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received thefollowing:WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
May 16, 2010
I an unable to connect to an openvpn connection in ubuntu karmic. I have installed openvpn , I added the user certificate, CA certificate , Private key and the conf file in the /etc/openvpn directory. Also followed the steps given here [URL]..community/OpenSSL under "Importing a Certificate into the System-Wide Certificate Authority Database" , but still when I try openvpn --config linux_client.conf I get the following error.
Mon May 10 21:58:57 2010 /usr/bin/openssl-vulnkey -q -b 2048 -m <modulus omitted>
Mon May 10 21:58:57 2010 LZO compression initialized
Mon May 10 21:58:57 2010 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Mon May 10 21:58:57 2010 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Mon May 10 21:58:57 2010 Local Options hash (VER=V4): '41690919'
[Code]...
View 5 Replies
View Related
Jan 21, 2010
I reinstalled Ubuntu on my HP pc-40 computer. I used to run Hardy Heron and am now running Karmic Koala. The cd drive which had had issues for a while, broke after finishing the install, when I tried to get the cd out.I dont know if this has anything to do with it, or if my computer is too old for Karmic Koala, or if possibly the harddrive didn't appreciate being overwritten a second time - but the graphics are not working well (small squares of previous windows linger in my present browser window*)everythin is much slower, and many applications come up without a border, or their windows cant be moved with the mouse.
To top it off, while I tried to fix a bug with the terminal (no border) and uninstalled it, I couldnt install it back. So no terminal, which really makes even a newbie like me sad.If I cant solve it in a few days I will probably try to install a smaller distro via USB - I think Slax can be installed straight to USB without a live cd?
View 5 Replies
View Related
Mar 14, 2010
I have desktop with DVD-RW drive that runs primarily on Linux (namely Ubuntu 9.10). My wife has netbook that rins Windows XP with no cd/dvd drive. There's also LAN through our ADSL modem/router. I've "ported" (actually, I've just grabbed sources and ran dpkg-buildpackage) iscsitarget package from Ubuntu Lucid to Karmic (here are packages), installed it (sudo aptitude install iscsitarget; sudo m-a a-i iscsitarget) and configured it in the following way (/etc/ietd.conf):
Target iqn.2020-01.local.develop7-desktop:storage.disc.dvdrw
Lun 0 Path=/dev/sr0,Type=blockio
#I've skipped commented lines
[Code]....
what's wrong with my config/iSCSI target/whatever else? Or, in short
View 1 Replies
View Related
Feb 9, 2010
I came to know about this bug or something in Ubuntu only in karmic version which slows down file transfer I've used ubuntu from version 8.10 and having considerable speeds like 3-4Mbps sometimes 2.5 to 2. Even though very less its seems okay for me transfering a big 5G file or a movie to external Hdd without stucking and allowing me to do other work. Now in karmic the transfer rate is of no change but its stucks ,fades into grey and hangs . It's not allowing me to do any other work like browsing and it stucks in mouse cliks and movements. I never noticed this kind of behavior in Jaunty ,Intrepid even though transfer rate is less.
It really took me more than 30 min to transfer 4.5GB iso image to external WD 40GB HDD . Its so odd and frustrating . Many people to whom i've introduced Linux and Ubuntu specially were complaining and some already went back to vista and xp.
[Code]...
View 1 Replies
View Related
Mar 21, 2011
I have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies
View Related
Aug 26, 2010
I have a linux box (fedora) with two ethernet cards eth1 and eth2. On eth1 I successfully configured a PPPOE internet connection. Such that from the server I can browse the internet. On eth2 I wired it to a wireless router essentially to provide the wireless cloud. On eth2 I also configured dhcp, such that the Linux box is both PPPOE and DHCP server.However my clients on the LAN cannot access the Internet.
On passing the routing command I get
Destination Gateway Iface
196.44.x.y 0.0.0.0 ppp0
192.168.1.0 0.0.0.0 eth2 (my subnet)
0.0.0.0 0.0.0.0 ppp0.
The router (functioning as a wireless access point mainly) has a fixed IP address of 192.168.1.2 and eth2 has IP address 192.168.1.1. The dhcp file running on Linux has been set with option router (Gateway) 192.168.1.1. I cannot figure out how to correctly set the routing table such that my clients on wireless can access the internet cloud. I googled and googled but no solid solution. Any suggestions?
View 3 Replies
View Related
