I am trying to install gcc 3.2 on linux mint 10 julia . I have gcc 4.4.5 installed already. I am getting errors during the 'make 'stage. I did the following after downloading gcc-3.2.tar.gz
Code:
tar xvf gcc-3.2.tar.gz
mkdir build-gcc
cd build-gcc
[Code].....
I am using openSuse10.3 GNOME. While I am trying to install VLC player I am getting lot of errors like libmpeg2 not found, wxWidgets not found, postproc not found and also some errors like FRIBIDI. For the last two weeks I am trying to install all the versions of VLC player like vlc 0.8.6b, vlc0.9.8a, vlc1.0. But installation was not successful.
View 2 Replies View Relatedi am having a problem concern zlib installation.i tried configure file successfully but make file displayed some errors.that usr/linux/limits.h not found.so i found that i have to install glibc-headers-devel...but there is no such a kind of package in ubuntu repository?/????/some people saying that libc6-devel is equal to them!
View 1 Replies View RelatedI recently got a computer donated to me for free from my Computer Science class, as the teacher couldn't figure out what the problem was that was preventing him from booting to the startup screen (all I could figure out was that the slot the memory card was in was bad, so I switched slots and got it working). The hard drive on the computer was wiped with a disk nuker called DBAN. Now I would like to install a Linux OS on the computer, but whatever disc or distro I try gives me similar "unable to read" errors. I would like to know if there's anything software-wise I need to do before attempting to replace any hardware. An example of the error I'm getting is as follows (using a mandriva livecd):
/etc/rc.d/rc.sysinit: line 1281: /var/log/dmesy: Read-only file system
SQUASHFS error: sb_bread failed reading block 0xa6e58
SQUASHFS error: unable to read cache block [29b963ea:782]
SQUASHFS error: unable to read directory block [29b963ea:782]
Anyone know what I need to do to get this fixed so that I can install a Linux distro?
I know there is lots of documentation out there for installing tar balls but I can't make it work I am trying to work with this file sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2 in file:///home/Nemesis/Downloads/sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2
I am running Fedora 12, the gnome desktop if the desktop matters. I have been running Fedora almost elusively for 2 years and off n on before that but in my many attempts at trying to Install a TARBALL I have always failed hard.
I have a PC with no option for a keyboard. I have to install the operating systems without a keyboard or mouse.
I have to make a bootable USB stick which can allow me to connect to the PC from my Laptop with a VNC connection, then the complete installation using IP to IP. I did this with the following:
Download [URL] Extract the files of .iso to my laptop Add the manual file in CentOS-6.0-i386-minimal/isolinux/ks.cfg
install
lang en_US.UTF-8
keyboard us
timezone --utc Europe/Brussels
rootpw --iscrypted $6$i5qEWD.
selinux --disabled
[Code]....
This allows you to modify your original iso files with the new contents and pack it as one .iso file
Finally load unetbootin and burn to your USB or disk or CD
I'm building a file server, but before the admins move this to the networking forum' this IS about the kernel.
Anyway, I'm building a file server... a very basic thing. not much to it at all.. which is kinda the root of the problem... this is an old Dell (ugh! I know!) Dimension 8300. it's running a 2.6 GHz Celeron (Northwood die, so single-core), with (at the moment) a mere 256 MB of RAM... so I wanted to build a kernel that really minimizes its presence in my minuscule amount of RAM using this guide, I have gotten so far as the actual Kernel configuration. wherein it says to cd to your kernel's directory and use the 'make xconfig' command... but when I do this, it gives me the following error:
Code:
so I've never compiled my own kernel before, so I haven't a clue what's wrong, or what I need to do
I have one simple question: how to tell gcc compiler to check for external functions to be matched by its prototype?
Consider this example:
Code:
master tests # cat file1.c
#include <stdio.h>
#include "file1.h"
[Code]....
what warnings or flag will prevent these examples from sucessful compilation? GCC version: gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2)
I've been trying to install Gimmie. So I've gone through a few tutorials and something always seems to go wrong. Right now I run the "make install" command it give me a bunch of error messages. If there is any other bits of information you need to know just ask.
View 2 Replies View RelatedI've been trying to follow this tutorial: [url] to get my Belkin F5D8053 Wireless Adapter working. I get so far as using the "make" command, but then encounter an error. This is the full terminal results:
Quote:
I'm using Ubuntu 10.10.
The question I have is, can iTunes ever work in Linux? I've tried installing it using WINE but to no avail. Is there a way to make WINE shut up with the errors and let it install? I've tried using the terminal.
View 1 Replies View RelatedGoogle only gives me references to ubuntuforums for GNOME-shell issues. Basically, when trying to compile a program that requires GTK+ and GLib, I get an error equal to this:
Code:
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_source_get_time'
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_source_set_dummy_callback'
/usr/local/lib/libgio-2.0.so.0: undefined reference to `g_main_context_invoke'
[Code]....
On a previous thread, I explained how I installed Fedora 14 from the live image disk onto a HP 2140 netbook only to find I was missing the development files. Stoat helped me use the more complete install DVD from Fedora 14 to install the development tools (rather than doing a complete reinstall -- which I would do if it made this work).
Unfortunately, I'm still unable to make PartImage 0.6.9 install. When I try, configure says that the bzip2 library (libbz2) is not found or too old. Apparently, this is because it can't get it to respond to BX2_bzopen from within the library. I think because it can't find the library. Inside the config.log file it seems to indicate that from an -lbz2 not found. Now I'm guessing that there is some trick to this, maybe some way of setting the library path to include the location of this and possibly other libraries under Fedora 14. I've checked the library's location and it seems to be in /lib as far as I can tell and bz2 does work, so it's somewhere. Of course it's possible since PartImage is pre-version 1 but doesn't have much if any activity on its forum that something has changed position in Fedora and the install isn't looking for it in the right place.
I've seen one blurb in the PartImage files that indicates that maybe using env to set environment variables on entrance to configure might work, but I'm not sure what variable to set or how to make it find the bz2 library. Note that I've been a UNIX user and administrator in the past, but that was in the System 7 days so that's rusty and I have no prior experience with LINUX of any kind.
I'm new to Linux use, and I'm trying to install new software. However, no matter what I try to install, I always get an error. This includes updates, and extra programs. What am I doing wrong?
View 9 Replies View RelatedI'm receiving warnings and errors while trying to install perl-DBI. Here's the command line syntax and messages.
rpm -ivh perl-DBI-1.611-1.el5.pp.i386.rpm
warning: perl-DBI-1.611-1.el5.pp.i386.rpm: Header V3 DSA signature: NOKEY, key ID 6971f6ac
error: Failed dependencies:
perl(RPC::PlClient) >= 0.2000 is needed by perl-DBI-1.611-1.el5.pp.i386
perl(RPC::PlServer) >= 0.2001 is needed by perl-DBI-1.611-1.el5.pp.i386
[Code]...
Should I try to uninstall PLClient & PlServer .02020 and try locate 0.2001?
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
First off, I'm completely new to bash scripting so forgive me if I make any egregious errors. I'm trying to make pop-up reminders for the simple calendar program when. This is what I have so far:
Code:
#!/bin/bash
# set the time format for when
#current="$(date +%I:%M %p)"
current="$(date +%-l%p)"
today=~/.when/today
[Code]....
When I run the script, gxmessage pops up and displays the correct information, but it does so for each line in "~/.when/today" that contains a time that matches the current system time (which would be three pop-ups at 10PM, according to the example). I want it to display the information only once. How can this be accomplished? Is a while loop even the right job for this?
I'm a complete newbie to Fedora and am just trying F15. I am trying to install Adobe Flash Player and am getting no-where fast. I have searched in the forums and on the web, copying and pasting the entries I have found but keep getting all sorts of errors because basically I don't know what I am doing.
View 3 Replies View RelatedJust installed ubuntu server 11.04 to have a play with. Ran through the installer and selected to setup as a virtual machine host. When booting I get 3 errors
Code:
[ 7.847619] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ===
[ 7.847624] [drm] nouveau 0000:00:0d.0: ======= misaligned reg 0x0060081D ===
[ 8.651603] [drm] nouveau 0000:00:0d.0: unknown connector type: 0xff!! ===
Any insignt into what may be causing this would be well appreciated.
It may be also worth noting that I dont see the grub screen. My monitor reports "out of range" I also did have ubuntu server 10.10 on here previously which installed without issue. (It wasnt actually being used for anything) I'm currently trying a reinstall hoping the errors will go away but any info would be much appreciated.
I'm trying to install virtualbox on slackware 13 and I'm running into header issues I think...it says it can't find libcap..any ideas? I downloaded libcap from slackbuild and tried to run make but I get errors (the second code block)
Code:
VirtualBox-2.1.4_OSE/kBuild/bin/solaris.sparc32/kmk_echo
VirtualBox-2.1.4_OSE/kBuild/bin/solaris.sparc32/kmk_cp
VirtualBox-2.1.4_OSE/kBuild/bin/solaris.sparc32/kmk_install
VirtualBox-2.1.4_OSE/kBuild/env.sh
patching file VBox.sh
Checking for environment: Determined build machine: linux.x86, target machine: linux.x86, OK.
code....
I am facing one big problem at the time of installation "WINE- Software" in Ubantu 9.10 (Karmic Release), errors are like-
GPG error: url karmic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 5A9A06AEF9CB8DB0
Actually I was planning to work with some "Windows application" program thru "Wine package", but could not able to install WINE software because of this error.
I have been having problems with Ubuntu. I just downloaded it yesterday and burned it to CD. However, when attempting to install it, I get errors. Unfortunately, I cannot recall the exact error but it stops the install. I will give further information later but wanted to ask if anyone has heard of this happening and if so, what the problems might be? I checked it with the MD5 and it appears to be a valid file, but the disk is giving me errors!
View 6 Replies View RelatedI am having problems installing .tar.gz files. Anytime that i try the default way of installing via terminal i keep getting the errors found below
[Eyekay@localhost RPM]$ tar zxvf pidgin-libnotify-0.14.tar.gz
pidgin-libnotify-0.14/
pidgin-libnotify-0.14/ChangeLog
[code]....
The following packages have been automatically kept back:
The following packages have been kept back:
I'm trying to install 32 bit mimio software for an interactive whiteboard onto a 64 bit laptop running ubuntu.
I've used getlibs to install some of the missing libraries but am still having truoble with the install.
The output is as follows:
Quote:
sudo dpkg -i --force-all mimio-studio_7.11-2_i386.deb
dpkg - warning, overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
(Reading database ... 232300 files and directories currently installed.)
Preparing to replace mimio-studio 7.11-2 (using mimio-studio_7.11-2_i386.deb) ...
I'm a bit stumped about the GLIBCXX errors .... I have libstdc++ but I reckon i need some symbolic links or something .. I need to get pointed in the right direction. glibc is installed but I don't know what glibcxx is.
I still try update my broadcom drivers, because when I try use airodump-ng i receive error.
This error:
Interface Chipset Driver
eth1 Unknown wl (monitor mode enabled)[code]....
I dont know why receive this error WARNING: modpost: missing MODULE_LICENSE() in /home/mobile/Desktop/wdriver/wl.o
see include/linux/module.h for more information
Debian Wheezy upgraded to Jessie. I can't install my grsec kernel. I did everything exactly like they say on website: [URL] ....
patching: grsecurity-3.0-3.2.66-201502180830.patch and linux-3.2.66 -o.k
then ''make menuconfig'': Configuration Method - Automatic (for virtualbox hosting) -o.k
compiling the kernel: 'fakeroot make deb-pkg' -o.k
and last step, installing new kernel : ''dpkg -i *.deb'' -not o.k
Below is the output from executing command : dpkg -i *.deb which supposed to install 3.2.66-grsec linux-image:
root@debian:/home/userone/Downloads/grsecurity.net/1# ls
grsecurity-3.0-3.2.66-201502180830.patch
linux-3.2.66
linux-firmware-image_3.2.66-grsec-1_amd64.deb
linux-headers-3.2.66-grsec_3.2.66-grsec-1_amd64.deb
[Code] ....
After restarting, old kernel is booting, however from booting menu under advanced GNU/Linux options i can choice 3.2.66-grsec linux-image to boot, unfortunately it 'panics' (kernel panic - not syncing: grsec: halting the system due to suspicious kernel crash caused by root) and only way to turn off the computer is to hold down power button.
I have played around with Fedora for a few years and recently switched to Ubuntu. I am installing VMWare Workstation version 7.1.0 from a retail packaged CD. When I attempt to install VMWare Workstation and VMWare Player I get the following error:
Aug 15 16:24:54.826: app-3078788800| Your GCC version: 4.5
Aug 15 16:24:54.837: app-3078788800| Your GCC version: 4.5
Aug 15 16:24:54.889: app-3078788800| Trying to find a suitable PBM set for kernel 2.6.38-10-generic.
Aug 15 16:24:54.895: app-3078788800| Trying to find a suitable PBM set for kernel 2.6.38-10-generic.....
Aug 15 16:24:56.163: app-3078788800| Failed to compile module vmmon!
I tried installing the patch for kernal 2.6.38-8 found here - [URL] - but it did not resolve the issue. Is there a patch for kernal 2.6.38-10?
I also found this posting for the same problem: [URL]. I followed the following instructions as advised in the post . . .
sudo apt-get update
sudo apt-get install make
sudo apt-get install gcc
Then enter:
uname -r
My kernel was: 2.6.38-10-generic
sudo apt-get install build-essential linux-headers-2.6.38-10-generic
Now run the vmware-install.pl script.
Everything ran without error. However, I continue to get the same error. Another post suggested uninstalliung and reinstalling the software, but this had no affect either. Another post suggested that after running the above update to them run the /usr/bin/vmware-config.pl script. However I do not seem to have the vmware-config.pl in my /usr/bin directory. I checked the various VMWARE directories in /etc and the /tmp/vmware-root directories but no vmware-config.pl
I've getting strange build errors when using make-kpkg with the latest (2.6.39-rc5) vanilla kernel.I'm using the procedure outlined here:
https:[url]....e.g.:
Code:
make oldconfig CONCURRENCY_LEVEL=`getconf _NPROCESSORS_ONLN` fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers
I'm getting the following build errors:
Code:
Building modules, stage 2.
MODPOST 3053 modules
WARNING: modpost: Found 60 section mismatch(es).To see full details build your kernel with:'make CONFIG_DEBUG_SECTION_MISMATCH=y'
CC arch/x86/crypto/aesni-intel.mod.o[code]....
There is even much more error output but it looks like it is basically the same issue.
I am trying to install faac codecs on ubuntu 9.10 karmic.after running the configure and make commands i get this errors:
View 7 Replies View Related