General :: Install And Run XAMPP On 10.04?
Sep 17, 2010I'm trying to follow the steps but I can't make it work:[URL]..I have finished: Step 1 and 2
And I'm stuck at Step 3: Start Here is a screenshot about the problems and what I did so far:
I'm trying to follow the steps but I can't make it work:[URL]..I have finished: Step 1 and 2
And I'm stuck at Step 3: Start Here is a screenshot about the problems and what I did so far:
I'm trying to install Xampp on my virtual Fedora 14 desktop. When I open the terminal, sign in as administrator, and yum install Xampp I repeatedly get the message, "Child returned status 2, setting up Install Process, no package Xampp available" I get the same message after I download from a different mirror.
View 2 Replies View RelatedI am a new user to the linux world. I am trying to put together a working configuration of Ubuntu 10.04 with XAMPP 1.7.1. (final goal is working kalturaCE application). Anyway, I've gone through all the installation guidelines that I could find and was able to get ubuntu installed (very easy) along with the other two apps. I can successfully browse to the kaltura app from the local network but I cannot get to it from the outside world (cannot get to kaltura or the base XAMPP file)? Is there a configuration where I could have possibly only told apache to respond to localhost and local lan?
View 1 Replies View Relatedi am new in linux and fedora,i cant install xampp 32 on fedora 64 what i am must to do? Post added at 05:54 AM CDT Previous post was at 05:08 AM CDT i have this error:
sudo /opt/lampp/lampp startapache XAMPP is currently only availably as 32 bit application. Please use a 32 bit compatibility library for your system. The message is very clear that XAMPP doesn't like 32-bit system. So, we will need to cheat XAMPP that the system is 32-bit. First, we will need to install some libraries: i find this for fix this problem but i have error
yum -y install glibc.i686
yum -y install libgcc.i686
yum -y install libstdc++.i686
and now, we need to skip the 32-bit annoying check:
sudo nano /opt/lampp/lampp
Replace the following from:
[Code]...
I'm trying to install OpenEMR. Official directions how to install can be found here. They say it's required to install MySQL, Apache (or another PHP-capable webserver), and PHP5. So I installed XAMPP following this instructions. I'm not familiar with the XAMPP. I only managed to start it.
Now going back to OpenEMR, I copy the unzipped directory to
Code:
/opt/lampp/htdocs/
I open a browser and give
Code:
http://localhost/openemr/setup.php
i get:
[Code]...
how to use Xampp and also how to configure mail agent in it
View 9 Replies View RelatedWhat do I need to start writing some php code? I've seen some tutorials where they install xampp, but I see it installs php, mysql and other stuff, my slackware already has mysql, so I don't know if installing xampp would cause some conflicts. What do I need to install considering that I already have mysql?
View 2 Replies View RelatedI'm trying to install a PECL module imagick into XAMPP, but it's not showing up on phpinfo();
The steps I've taken so far
1. Compiled Image Magick from source
2. Compiled imagick PECL module from source
3. Copied the .so files magicwand.so and imagick.so from /usr/lib/php/modules/ to /opt/lampp/lib/php/extensions/no-debug-non-zts-20060613
4. added
extension=imagick.so
extension=magickwand.so
i can't access to localhost with firefox although yesterday I could installing XAMPP successfully and access to localhost. Now when i enter to file:///opt/lampp/htdocs/index.php this message is shown :"Something is wrong with the XAMPP installation
View 1 Replies View Relatedhow to install or how to run Xampp on Linux Mint 7. to start with an extraction is required and this is the error that i am getting while trying to do this:
kelvin-desktop kelvin # tar xvfz xampp-linux1.7.3atar.gz -C /opt
tar: xampp-linux1.7.3atar.gz: Cannot open: No such file or directory
tar: Error is not recoverable: exiting now
[code]....
I have been using wamp on an XP box and now moved to a Linux box with Mepis 8.5 and latest Xampp.
I would like to know if there is a menu system which I can have on my desk which will start xampp and show the links to my sites?
Wamp has a similar one and a nice menu system with links to phpmyAdmin, MmySQL, Apache etc. It makes thi g so much easier.
I know to go to the server's IP then slash, but where would I look to see what goes after the slash.
I know where the samba share with all the files for the website points to, but when i put that full path after the slash i get nothing.
Not sure why, but the last couple of tiems I have started xampp from root terminal, I have got this message after each program start.
Warning a bogus unix line
Since that last time it was not there, other that add sweb spahes etc., I have only tried to unpack the Control Panel which was unsuccesfull anyway saying I needed some other programs.
I'm not quite sure where I should post this but here goes.. I installed XAMPP, and got it running but I'm not too sure on how I should be able to run PHP commands? As in the command line?
View 9 Replies View RelatedI cant get to my phpmyadmin on xampp I tried doing it on the terminal but i get this wierd message
XAMPP: Another web server daemon is already running.
XAMPP: Another MySQL daemon is already running.
XAMPP: Starting ProFTPD...
XAMPP for Linux started.
But i cant get in phpmyadmin What can i do linux pros?
i installed xampp using a tutorial posted here, but now the issue is i dont have priviledge to that directory. currently the xampp folder is located in /opt/
and i cant seem to fig out how i can get privil to that folder. (my user is "nate" not root
I am using Ubuntu 11.04. I am also using xampp 1.7.4.It always says it needs to be run as root, however some people have mentioned that it poses a great security risk.So how do i run xampp without being root?
View 2 Replies View RelatedI cannot seem to display php files on xampp. When the php file opens up all it shows is either a blank white page or sometimes it just shows the source code.
View 3 Replies View RelatedI'm new to fedora and linux. I'm trying to add virtual hosts to my xampp server in /etc/hosts I added :
Code:
127.0.0.1 localhost.localdomain testsite
and in /opt/lampp/etc/extra/httpd-vhosts.conf added this:
Code:
<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
DocumentRoot /opt/lampp/htdocs/testsite
[Code]...
I've just executed /opt/lampp/lampp security and restarted lampp, now it shows as deactivated in status when I browse to http://localhost
The default username lampp doesn't work with my new passwords, phpAdmin doesn't let me log in.... everything.
I have opensuse 11.3 . i tried to install xampp but i have problems. when i try to extract the downloaded archive file to /opt with the command line:
I have an error message :
Then when i want to start xampp server with:
It didn't work because the file lampp does not exists in /opt/lampp
The command line ls /opt/lampp/ gives
I'm using ubuntu 9.10 64bit and I'want to configure php mysql and lampp. Also the package mysql-ser is already installed, so if I install MYSQL GUI tools(Administrator, query browser..) from my synaptic package manager will it detect the mysql already installed ? Also tried configuring lampp by extracting it in my /opt directory and i started the server, which MySQL ll it detect the one which was previously installed otr the oin that in gui tools ?
Also think the current ubuntu repository does't have latest build of mysql GUI tools, so how the above mentioned things ll change if I try to download the individual package.
Oveall what I want is to configure Mysql GUI tools, Mysql workbench, xampp and php(For this I'm using Bluefish and Komposer). Please help me out so that I can leave windows for my Web-projects.
I'm trying to run Xampp so that I can test Drupal out. I'm running Lucid Lynx Beta. I'm having a lot of trouble getting Xampp to run. I downloaded Xampp version 1.7.3a and installed it but when I type http://localhost in Firefox to see if Xampp is working it just says:
Quote:
This is the default web page for this server. The web server software is running but no content has been added, yet.
I have an Ubuntu latest box that runs as a server for my xampp. And then an old windows laptop to connect with, this is for web development purposes. When I boot up windows I try and access the local ip of the server = it works. But after awhile.. maybe a few mins or an hour windows cannot connect anymore of Ubuntu, I always get "Internet explorer cannot display the webpage" error. I tried ping and it would not work, I'm quite sure the IP did not change at all. I reboot and try again, it works. I reboot again to test, it doesn't work.
I don't get it, =/ Ubuntu doesn't have any form of firewall, just the default settings. Both could use the internet but oftentimes fail for local networking...
i want to Xampp run and start all time when i start pc. i don know correct command for use crontab when i want to use it i must delete ># m h dom mon dow commandor not ?
View 2 Replies View Relatedi would like to know how many connections per sec/min/hour, xampp can handle. I'm going to run SMF forum on my box, because i'm not ready yet with real server solution. System stats are: G31M-S2C; 2x2GB Kingston@920Mhz; E5200@3500Mhz; 500GB@7200 Seagate, all powered by Lucid x64. In a time i will migrate to a quad, mobo with raid support, etc. but at that point i'm want to know how much connections can xampp handle. Because of the forum nature, i think of auto deleting topics witn no new replys in 5 days for saving place (there will be minimum 1 and maybe max 5 photos per thread, maximum size 2Mb for each).
View 4 Replies View RelatedI have recently set up my web server using the LAMPP package for Ubuntu. Now I'm running Ubuntu Server 10 so my machine boots into the console and not gdm. Also I have my machine autologin as root so I can simply turn my server on and not mess around with logins. Now I created a simple shellscript for starting lampp and then I put it into etc/init.d/, chmod -x file.sh to give it executable permissions, then I update-rc.d file.sh defaults but nothing happens on startup. It simple takes me to the console and nothing more happens. I have to manually start lampp on every bootup.
View 1 Replies View RelatedI have installed XAMPP in Ubuntu, but I do not know how the process continue after the start XAMPP.
View 3 Replies View RelatedI decided that owncloud looks very kewl, so I uninstalled apache friends' xampp which I've been using for years, and ran 'apt-get install owncloud'. Install went fine, PHP, Apache, mySql all fine. I also added PHPmyadmin.
I can access my local html websites via localhost - but my Drupal sites ( I don't have any other dynamic sites so I don't know if it's Drupal related or database related exactly) only show front page, but incomplete, and all links go to 404s. I installed a fresh Drupal site no probs, it all works fine.
I am struck with this problem since yesterday, Everything was working fine until i got a sudden error saying[Warning]: PDO::__construct() [pdo.--construct]: [2002] No such file or directory (trying to connect via unix:///opt/lampp/var/mysql/mysql.sock) (Database/class.SWIFT_Database.php:330)Then i went into server and restarted server. it started saying
/opt/lampp/lampp restart
Stopping XAMPP for Linux 1.7.4...
XAMPP: Stopping Apache with SSL...
[code]....