I'm trying to run Xampp so that I can test Drupal out. I'm running Lucid Lynx Beta. I'm having a lot of trouble getting Xampp to run. I downloaded Xampp version 1.7.3a and installed it but when I type http://localhost in Firefox to see if Xampp is working it just says:
Quote:
This is the default web page for this server. The web server software is running but no content has been added, yet.
I have installed Postfix + Amavisd-new, then I am started all services (and configured main.cf and master.cf to use amavis).
The questions are:
1) I am trying to test antivirus scan using eicar test virus
Code:
And the message is successfully delivered to mailbox with mark "CLEAN" in maillog. But I cant see any attachment using
Code:
Where is my mistake?
2) Should I update clam and how I can do it?
3) Is spamassassin enabled by default in amavis (I have started daemon)?
4) Where configuration files of spamassassin is stored?
I have installed Drupal 6 using synaptic and it shows as installed in synaptic but NOT in my Ubuntu software center but it is nowhere to be found.
View 4 Replies View RelatedI had OpenERP completely installed and running just fine. All basic install instructions just worked out of the box on Ubuntu 11.04. Now, we also are going to develop our own web site. For that we needed a web development environment. Due to the small size of our home business, we have to do it all on one PC. So I went ahead and installed everything needed to get Drupal going, among which I had to install:
LAMP
Drupal
Memcached
Memcache
Postfix
Tomcat
and other packages.It all works like a charm, but now my openerp-web crashes when I start it with the following message:
Code:
[20/May/2011:16:17:19] ENGINE Bus STARTING
[20/May/2011:16:17:19] ENGINE Started monitor thread '_TimeoutMonitor'.
[20/May/2011:16:17:19] ENGINE Started monitor thread 'Autoreloader'.
[code]....
For those that do not know it: it is a module that interfaces with the OpenERP server software to allow people to access the system through their web browser, effectively eliminating the use to install a client on their PC. Very practical for our light weight laptop that we use in combination with my PC.
Normally one would connect by browsing to [URL] and automatically get connected with the OpenERP environment.Now, however, that does not work anymore with the above error as a result. Do you guys have any idea if I have to configure something in Apache to get this working again? Possibly with instructions, otherwise I'd get lost again in no time.
Is it possible to complete a drupal installation and change the configuration from the comman line or a script. Id like to be able to automate the process of installing and configuring drupal. I should say that this is quite a bit beyond me. Ive not long started learning scripting.
View 2 Replies View RelatedI have user names / info for several thousand users I want to add to the website Im working on. Though this is a test server, I would like to have some way to automate adding users to my drupal site. So, I'm looking into drush. From the man page for drush, I dont see any way to add users. Once I figure out how to add 1 user, and configure thier default pages ect, I can write an Expect (TCL/Tk) script to handle the processing. But I need to know how to add users in drupal 7.4 via the terminal.
View 1 Replies View RelatedThere are many ways of accomplishing this installation. What this tutorial attempts to do is to outline the most basic installation possible. It show you how to install Drupal from the command-line to speed up "development" of your website. [[EDIT]] REMOVED LAMP SERVER INSTALL PART OF TUTORIAL AS THERE ARE MUCH BETTER (MORE SECURE) TUTORIALS ON THIS TOPIC.
Install drush for using the command line on Drupal. Create some management scripts to manage Drupal via the command-line. Create some installation scripts to install drupal via the command-line. Make the scripts executable and install them in /usr/local/bin. Open a terminal and install Drupal with one command.
01. You have your LAMP server, Drupal MySQL database and databse user setup and ready to go! For development sites on my local desktop machine I use root as drupal's database user because it speeds up re-installation when necessary.
02. Install drush (DRUSH 4.4 AVAILABLE IN NATTY WITHOUT PPA)
#apt-get install drush
03. Create 3 folders to hold your drupal backups, scripts and libraries
#mkdir /home/user/drupal/backup
#mkdir /home/user/drupal/scripts
#mkdir /home/user/drupal/libraries
#cd /home/user/drupal/scripts
04. Create a script to manage web server permissions
#gedit drupal-siteperms && chmod +x drupal-siteperms
---------cut-and-paste----------
#! /bin/bash
cd /var/www
[code]...
I extracted the Drupal package (6.20) to /var/www/html and followed the provided install.txt file, but whenever I try to navigate to the site it simply comes up with the PHP script as plain text (it does automatically redirect me to install.php) rather than executing it. PhpMyAdmin works fine, as does a simple PHP "hello world" page I made, so I assume PHP isn't the problem. Now my question is: what could be causing this?
I can't tell for sure if the problem's with Drupal itself (I started over once with no luck) or some setting on my system, but since I don't have an account there I figured I'd ask here first.Running F14 x64, Apache, PHP and MySQL are all at latest versions available.
I've successfully set-up Drupal on my machine on a local network and have no problem accessing it with the virtual host names defined in /etc/hosts, but I don't have bind or any other DNS set-up.I've installed Postfix and can sent email with the mail command to unix account, and I can also read them with the mail command( from the command line).Now, my problem is with not being able to use the local Unix email accounts in drupal. Particularly, I would like to have one of the unix account receive email for the development site.I might like to also have various user on the drupal installation, and then test sending notifications to them.here is my /etc/postfix/main.cf# See /usr/share/postfix/main.cf.dist for a commented, more complete version
View 2 Replies View RelatedI cant get to my phpmyadmin on xampp I tried doing it on the terminal but i get this wierd message
XAMPP: Another web server daemon is already running.
XAMPP: Another MySQL daemon is already running.
XAMPP: Starting ProFTPD...
XAMPP for Linux started.
But i cant get in phpmyadmin What can i do linux pros?
I have a scenario.A domain [URL].. then there are 4 private computers on which applications are hosted at port 80. So when some one from outside access the site it look [URL]..I added
[Code]...
I'm using ubuntu 9.10 64bit and I'want to configure php mysql and lampp. Also the package mysql-ser is already installed, so if I install MYSQL GUI tools(Administrator, query browser..) from my synaptic package manager will it detect the mysql already installed ? Also tried configuring lampp by extracting it in my /opt directory and i started the server, which MySQL ll it detect the one which was previously installed otr the oin that in gui tools ?
Also think the current ubuntu repository does't have latest build of mysql GUI tools, so how the above mentioned things ll change if I try to download the individual package.
Oveall what I want is to configure Mysql GUI tools, Mysql workbench, xampp and php(For this I'm using Bluefish and Komposer). Please help me out so that I can leave windows for my Web-projects.
i want to Xampp run and start all time when i start pc. i don know correct command for use crontab when i want to use it i must delete ># m h dom mon dow commandor not ?
View 2 Replies View Relatedi would like to know how many connections per sec/min/hour, xampp can handle. I'm going to run SMF forum on my box, because i'm not ready yet with real server solution. System stats are: G31M-S2C; 2x2GB Kingston@920Mhz; E5200@3500Mhz; 500GB@7200 Seagate, all powered by Lucid x64. In a time i will migrate to a quad, mobo with raid support, etc. but at that point i'm want to know how much connections can xampp handle. Because of the forum nature, i think of auto deleting topics witn no new replys in 5 days for saving place (there will be minimum 1 and maybe max 5 photos per thread, maximum size 2Mb for each).
View 4 Replies View RelatedI have recently set up my web server using the LAMPP package for Ubuntu. Now I'm running Ubuntu Server 10 so my machine boots into the console and not gdm. Also I have my machine autologin as root so I can simply turn my server on and not mess around with logins. Now I created a simple shellscript for starting lampp and then I put it into etc/init.d/, chmod -x file.sh to give it executable permissions, then I update-rc.d file.sh defaults but nothing happens on startup. It simple takes me to the console and nothing more happens. I have to manually start lampp on every bootup.
View 1 Replies View RelatedI'm new at using Ubuntu, I really need to use XAMPP / LAMPP for testing my websites. The problem is that, I can't save files to the HTDOCS of my XAMPP.
View 1 Replies View RelatedI'm new to fedora and linux. I'm trying to add virtual hosts to my xampp server in /etc/hosts I added :
Code:
127.0.0.1 localhost.localdomain testsite
and in /opt/lampp/etc/extra/httpd-vhosts.conf added this:
Code:
<VirtualHost *:80>
# ServerAdmin webmaster@dummy-host.example.com
DocumentRoot /opt/lampp/htdocs/testsite
[Code]...
I have been using wamp on an xp box and now have set up ubuntu with the localhost server seeming to be going okay.
As this is just a desktop graphical test server with no real public hosting, I was hoping to find a control panel like in wamp where one can stop/start php, apache, mysql, phpmyadmin and see logs etc.
I currently have a windows server running with XAMPP installed.I want to try out ubuntu server, I am a complete linux newbie and was wondering if there was a similar package to XAMPP out there with:ApachePHPMySQLAnd some form of ftp server
View 5 Replies View RelatedIs their from the CLI a way to test the internet speed between two servers?I'm thinking some sort of ping test that can calculate it or something.
View 2 Replies View RelatedI have installed Ubuntu enterprise cloud on two machines(Cluster and node)and trying to set up an image and test my internal website in private cloud. if there is any documentation or any steps?
View 1 Replies View RelatedI recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies View RelatedI am in the process of running a set of performance tests for the latest Sun JVM 1.6.0_20. I am using for that the dacapo test suite: [URL]
I ran the test suite very often with all sorts of settings, but recently it happened once that my Ubuntu system froze. I could still ping the machine, but nothing else was responding any more, no screen output, no ssh login, not possible to switch consoles. After rebooting the system the system logs were quiet. No single trace of any problem.
I am using a custom compiled kernel 2.6.34: Linux i7 2.6.34-custom-201005231602 #1 SMP PREEMPT Sun May 23 16:06:01 CEST 2010 x86_64 GNU/Linux and I am experimenting around with the -XX:+UseLargePages JVM switch the requires to set-up the hugetlbfs on the Linux system: [URL]
A similar issue happened in March 2010 on one of our CentOS 5.4 systems where we run a heavy load Java application on, where we had to hard power off the machine and after the reboot there was no trace of the problem in the logs. On that server we used JDK 1.6.0_17 and did not use hugetlbfs.
My first question would be what to do so that next time something like that happens I have more information available after the incident to debug and analyse the problem?
I already install mailgraph in ubuntu 10.04. but now I got problem with mailgraph in ubuntu 10.04. No graph appear in the graphic created by mailgraph.I know mailgraph consist of perl and cgi script.If I have postfix log, how to test mailgraph manually to create the graphic using its perl script from existing postfix log. Just to see whether the graph created or not in the graphic
View 1 Replies View RelatedI'm running a server using Debian 5, on which a few people log on to over SSH using a user account with limited permissions. Basically I want to make sure they can't run things like fork loops as a lot of bad stuff would happen were the server to hard reboot.So, how can I test what something like this will do:
Code:
:(){ :|:& };:
in a controlled environment, ie. so that I can kill it without rebooting?
I installed Apache2 and I added a second virtual host, now can i separate the 2 hosts and let them access 2 different internal test sites? For Example lets say"
User1 uses one IP
User2 uses second IP
How can I separate it in Apache2 and in the /var/www ?
I am trying to install mysql 5.1.44..so i downloaded the binary package, i extracted it and then followed the instructions that were in the manual but i keep getting this error when running this command
Code:
scripts/mysql_install_db --basedir=/home/mosty/mysql
the error is
Code:
Installing MySQL system tables...
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
100315 20:07:27 [Warning] Can't create test file /var/lib/mysql/mosty.lower-test
[code]....
You can try to start the mysqld daemon with:
shell> /home/mosty/mysql/bin/mysqld --skip-grant &
and use the command line tool /home/mosty/mysql/bin/mysql to connect to the mysql database and look at the grant tables:
shell> /home/mosty/mysql/bin/mysql -u root mysql
mysql> show tables
I use .htaccess to deny all ip addresses except certain to an internal wiki on a subdomain.
Code:
If access is denied to the homepage users are shown the Fedora test page instead of my own custom 403 error page. When I go to a page - not home - I see a standard 403 error page.
Code:
Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache/2.0.54 (Fedora) Server at wiki.domain.com Port 80. What am I missing here? Seems like my ErrorDocument is not being reached..
I'm in the process of setting up a script in perl to make 1,000's of curl calls to my companies application on our test server. Our software does all sorts of tracking of data based on IP addresses using geoIP, so i was wondering if anyone knew of a way to fake these addresses to the server?I know a big issue with the IP faking is the return path but i dont really need this. I also cant do it on the hardware level since the script is going to be picking lots of different IP's at random.Anyone have any idea if this is possible and if so, are there any known libraries i can use for this? I prefer perl but any Linux compatiblie scripting language is fine.
View 1 Replies View RelatedI have created mobility of 20 nodes and vbr traffic using following attached script I executed the file as ns234 vbr.tcl I got the vbr.tr and vbr.nam but I was unable to load the graph using matlab <trgraph> I thought problem with is vbr.tcl script.
View 1 Replies View Related