Running CentOS 5.5. NetworkManager is able to connect to wifi after logging in as root in the GUI and entering password to unlock keyring. What do I need the change to get NetworkManager to connect the wifi at bootup?
View 2 RepliesThe auto connect feature of NetworkManager Applet (version 0.7.997) isn't working on my system. If the WiFi connection dies, Network Manager doesn't detect that the connection has been lost and try to reestablish the connection. I have to manually click on the WiFi hotspot to reestablish the connection. This appears to be the case both while the computer is running and when I first boot it up (i.e. when booting, if the first attempt at establishing a WiFi connection doesn't succeed, Network Manager doesn't retry or try another hotspot).Is this "normal" behavior for Network Manager? If not, does anyone know a fix? Here's some more info about my system:
Computer: Dell Inspiron 1318 laptop
WiFi Chip: Broadcomm BCM4238
Kernel Version: 2.6.31.12-174.2.22.fc12.x86_64
[code]....
I was having a problem with cairo dock, asked on the board how to resolve was told to reinstall the visual driver for my monitor since I have an ati vid card since with the updated kernal u have to reinstall those drivers(didn't know that, I'm new to opensuse). I thought I did that before so I completely uninstalled it so I could then do a fresh reinstall but I wasn't paying attention and my laptop was unplugged for a while. I stepped away while the install was going on and my laptop died.
I tried plugging it in but had to restart my laptop when I did I got the command line rows and when I tried to start GDM it wouldn't start, I did so as SU. Attempted to connect to the internet via networkmanager and couldn't get wifi or wired to work. Anyway I can access my desktop visually just so I can start yast and install the driver or will I have to reinstall 11.2 or use the cd to repair? If so how do I use the cd to repair?
Suddenly my wireless card isn't coming up automatically.The following sequence fixes it:
Code:
ifconfig eth1-eth0 up
killall NetworkManager
[code]....
Distro: Debian (Testing), Wireless Card: Intel Pro/Set Wireless 2200bg
I am using Fluxbox as a window manager, and sometimes not using X at all, so I need to be able to be connected to some pre-selected wireless networks without the assistance of Network Manager.
I remember I used to be able to do this in Debian by editing /etc/wpa_supplicant.conf, but it seems it has been moved. wpasupplicant is installed on this system however, I tried to do an apt-get install and it said that it was already installed.
While I was installing Debian (testing), it asked for an external source for my wireless card firmware. As I didn't have a flash drive handy, I had to skip this step and do the setup through a wired network connection.
After the initial install. I manually installed the ipw2200 firmware (I have an Intel Pro/Set Wireless 2200bg card). It looks like this worked because I was getting a missing firmware error when I was booting up previously, and it went away after I did this. I be able to check with modprobe? I'm a bit rusty with this.
I checked my /etc/network/interfaces file and it does not look like my wireless card is in there, I see the loopback and the wired card eth0.
This is my ideal setup:
1. Attempt connecting to wired network (if present)
2. Attempt connecting to wireless networks in this order:
a. Home (WPA protected, hidden SSID)
b. Work (WEP protected)
c. Library (Open, No security)
I'm using CentOS 5.4. I want to set-up a PPTP connection (I'm the client). I installed the NM pptp plugin from EPEL's repository. I have configured my PPTP connection in the NetworkManager applet but now I don't know how to connect to the server, I mean, there's nothing like 'Connect now'.
View 1 Replies View RelatedI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I loaded F10 up on my laptop a few nights back. NetworkManager connects via Ethernet just fine. It will also connect wirelessly, but only when security is disabled. I've been using 128-bit WEP.
When I try to connect using security, this is what appears in the log:
Code:
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Jan 29 21:07:17 localhost NetworkManager: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
[Code]......
I've simple PPTP connection in NetworkManager that is build in with ubuntu, once I disconnect the connection [to change IP or so] the connection won't establish again...
I'm getting a libnotify popup that says "Connection failed because timeout"
I'm getting a good IP, I just can't connect again after 1 disconnect...
Any idea why?
I'm running ubuntu 9.10 with the latest networkmanager (from ppa)I thought this could be wrong credentials setting, so i've tried a huge amount of setups (user: phonenumber, password: phonenumber, avp:telenor, seems to be the general consensus for how it should be)Is there something I'm missing or is there any way I could tail the output as NetworkManager tries to connect (hopefully seeing something like "wrong password" etc.)
View 6 Replies View RelatedAfter some wonderful days with fedora with my CDMA mobile internet connection (the only connection where I live) NetworkManager can't connect anymore.
I tried to delete the settings and rewrite them without success.
I have A Novatel Ovation U720 CDMA/EDVO USB modem.
I can connect with wnXP and kubuntu, but can't connect with fedora anymore.
I wish to make the definitive move from kubuntu to fedora... but I should wait.
have to connect to it manually every time i log in where i'll get prompted for the root password to connect.
things worked fine on F12.
i have added a vpn connection on my Lucid desktop machine, but every time i try and connect, it fails. I also have the same, identical vpn connection on my karmic install on my laptop. everything works perfectly on Karmic, but Lucid is having problems. I have followed identical steps for creating the vpn connection on both machines: vpn connections can be made in 2 ways, the first is through the network manager, but trying to connect through the nm-applet returns an error about vpn failing to connect and "no valid vpn secrets".
I suspect this is at the root of the problem. The only way for my Lucid machine to successfully connect through the command line is if I run the openvpn command under sudo.
I have a ZTE 3G USB modem (MF645).
When I plug it, 5 devices appear: /dev/ttyUSB[0-4]. The modem device is /dev/ttyUSB2, and I can successfully connect wvdial on it.
NetworkManager detects the modem, however, it tries to connect to /dev/ttyUSB1 instead, and fails.
How does NM decides which device to connect to?
Is it possible to instruct it to connect to a specific device?
I cannot connect my Dell Inspiron 1300 through the NetworkManager "wired" connection, when I try to go direct to the cable modem. It fails to connect.
If I connect the cable modem to my (linksys WRT54GS) wireless router, and then connect my laptop to a wired port in the router, it connects in seconds, successfully.
This has happened to me 2 other times, when I tried to connect my laptop to a client's cable modem, because my client did not have a wireless router available, in their home.
My wireless works fine. This has me perplexed. I'm using Ubuntu 10.04 LTS and NetworkManager Applet 0.8
I've tried some things to see what is going on, such as "ifconfig" "dhclient" as well as modifying the "Auto eth0" parameters and adding my laptop's MAC address, etc. Results were no fix or solution. I feel like I'm headed down the wrong road. Would someone set me straight? I have a feeling this is simpler than I think.
Do I have to actually reset my own or someone's cable modem to get this to work? I don't want to do that unless there's no other way. Is there? Let me know what commands I can or should run.
I'm getting a timeout error from NetworkManager when attempting to connect to my router/firewall.
Excerpt from /var/log/messages attached.
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI can not connect to wifi networks, i can see them but not connect.
My wifi device is:
just installed Debian 8.2 on my ThinkPad X230 laptop using netinst. I installed only basic system and then install packages I need manually. Now I stuck with NetworkManager and Wi-Fi. NetworkManager and its applet (package network-manager-gnome) installed, I can connect to my Wi-Fi network, but after reboot a dialog asking for passphrase for keys appeared and even after entering correct passphrase NetworkManager does not connect to the Wi-Fi, so I need to connect it manually.
View 4 Replies View Relatedi recently got an msi wind U100x running on linux suse enterprise 10 sp1. i am totally new to linux and i believe that msi wind is not helping. i remember at some point seeing an icon in my toolbar to indicate available wifi networks, but it disappeared a few weeks ago, and i was never able to locate it again. out of dispair i reset the computer to factory settings. all i have is "no network connection" icon, and when you click on it you have both enable networking and enable wireless.
i read somewhere in help that i should have a knetworkmanager, but i can't find it anywhere. all i see in my control center is network card, and when i go in there, i go to 'user controlled with networkmanager' and i see 'micro-star international ethernet controller not configured'. before i reset to factory settings i used to have a wireless card as well.
in a word: i am totally lost and don't know where to start. any step by step to help me connect again?
Having played around with ubuntu a fair bit I decided to breathe life into an old thinkpad with a pcmcia wireless card, by following the minimal install instructions and using lxde window manager etc.. Everything works fine apart from the fact that I cannot connect wirelessly. The card picks up and lists connections but whenever I have clicked on a connection the dail spins and then it gives up.I installed network-manager and managed to get nm-applet appearing in the sysTray otherwise I would not even have known there was wireless connections there.
I was thinking there maybe some conflict with another network manager, does this sound likely?
I'm having an issue recently with Ubuntu 10.04 x64. Connecting to my wifi is not working. I believe it is some kind of issue with the router. On Windows 7 the only way that I could connect to the net was by copying the network profile to a usb flashdrive from another computer and loading it mine. The wireless signal just keeps attempting to connect.
View 1 Replies View RelatedI have Ubuntu 10.04 on my EeePC 1000H. I don't use this computer often but it has always worked before... I suspect an update did this to me. I've recently swapped wireless routers but all my other machines have been able to connect to the new router. I can see the SSID and the signal strength is high but when I try to connect to it, it just attempts for a long time then asks me for my password again. I am currently connected to wired network.
Code:
michael@michaelsEeeUbuntu:~$ nm-tool
NetworkManager Tool
State: connected .....
pan0 Interface doesn't support scanning.
I installed Ubuntu 11.04 yesterday and my wireless didn't work so I searched a little and found a way to make it work; Uninstalled bcmwl-kernel-source and installed firmware-b43-lpphy-installer and b43-fwcutter. And it worked. But today I accidentally pressed the "turn off wireless" button on my laptop. I obviously pressed it again and thought it would work but it doesn't. Now I find networks and stuff but I can't connect to them. It tries for awhile and then asks me to enter the password which I do (it is correct) and then it tries to connect for a few minutes again and then it asks me for the password again.
Some info:
Code:
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset
[Code].....
I'm having a problem to connect to the network at home via wifi, open or protected. Using ubuntu 11.04, attached are more details. I've managed to get a successful connection on an open network at work.
View 7 Replies View RelatedIm using Fedora 14, and I use mifi2372 for wireless wifi. The device is new and it will not connect to my laptop. Im sure the device is okay however I dont know about my laptop. The switch that turns on wifi does not turn blue.
View 9 Replies View RelatedI tried to connect to a WIFI require WEP key. I make the WEP key myself. I wrote it down on a piece of paper myself. My PSP can connect to the network, my XP can connect to the network. But same machine, my Fedora 11 can not connect to the network. As long as I tried to connect to the network, network manager just keep asking me for the WEP key. I put in the WEP key and tired out every option the network manage offer(WEP40/128bit, share key, etc),
View 3 Replies View Relatedis it possible to connect to my internet router from the console? for some reasone my gnome envirment removed and i want to install it again.
View 5 Replies View RelatedI can connect to my home WiFi connection with no trouble at all.
I can't connect to a free public WiFi (like at a library).
i am tryin to connect to internet through wifi. for this i have to connect to router first and then open the web browser to put UN and PW. I am using ubuntu. i know UN and PW. I can connect to router but my(any) web browser cannot open the authentication page.
View 3 Replies View Related