General :: Get Yum To Install 64 Bit Code?
Apr 5, 2010Just installed Fedora 12 on a customers server which has a 64 bit CPU but the kernel installed is the 32 bit version.
How can i get yum to install the 64 bit code?
ADVERTISEMENT
General :: How To Install From Raw C Source Code?
Mar 13, 2011I am trying to install the tightVNC on my imac.It expects X install; I see that X11 in my utility. I think it is ok, but the instruction states to install it on /usr/bin/. Which is correct?Then I need to have ~JPEG and ~zlib to place in /usr/bin/ or inside of certain folders to use.To make sure it is ok; I put both of them in both of the indicated places. I assume it is going to work.Now, I am suppose to build and install. I am not sure how to do it with the command "xmkmf" and not sure where to run this command.I am doing all of this in terminal.
View 1 Replies View RelatedGeneral :: Getting An Invitation Code To Be Able To Install Elive 2.0?
Dec 1, 2010I need an invitation code to be able to install Elive 2.0.I have to evaluate it so I am not going to pay it.So I need an invitation code.I am not able to contact them on IRC.
View 4 Replies View RelatedGeneral :: Install Debian On A AMD K6-2 - Dpkg Error Code 1
Aug 16, 2010I was triyng to install Debian on a AMD K6-2. I use debootstrap, and installed Lenny, with a kernel linux-image-2.6.26-2-486.
After that apt-get update and apt-get upgrade and I get:
The following packages will be upgraded:
Since release 150, udev requires that support for the CONFIG_SYSFS_DEPRECATED feature is disabled in the running kernel.
Please upgrade your kernel before or while upgrading udev.
AT YOUR OWN RISK, you can force the installation of this version of udev WHICH DOES NOT WORK WITH YOUR RUNNING KERNEL AND WILL BREAK YOUR SYSTEM AT THE NEXT REBOOT by creating the /etc/udev/kernel-upgrade file. There is always a safer way to upgrade, do not try this unless you 0understand what you are doing!
And similar messages appears trying to install xfce4...
General :: How To Recompile Any Source Code Of Software To Install It?
Mar 23, 2010I have fedora 12 on my laptop and I am unable to recompile the source code of flash player. please answer me as soon as possible.
View 2 Replies View RelatedGeneral :: Follow Directions To Install A Program From Source Code (tar.gz File)?
May 11, 2010I had Ubuntu for awhile, now I installed Fedora12, I'm trying to follow directions to install a program from source code (tar.gz file) I have the February 2010 issue of Linux Format, and am trying to follow it step by step. I copied gnurobbo off their disk to my desk top, which copied it. Then I did the cd command, then I did the ls command and it didn't show me anything but a line saying desktop and a few other things like pictures movies etc. so I did cd gnurobbo-0.64 and it says no such file. I have been trying this for a few times and I think I'm going crazy.
View 3 Replies View RelatedOpenSUSE Install :: System Error Code -3030 When Trying To Format Of SSD During Install
Sep 27, 2010I am not able to install 11.3 x86_64 on an OCZ 120 GB Agility 2 SSD. I receive a system error -3030 when it tries to format the drive. If I use go into rescue mode and either format or partition the drive, the installer crashes.
View 3 Replies View RelatedProgramming :: Selenium Java Code Into Equivalent Php Code?
Mar 30, 2011I need to rewrite the selenium java code into its equivalent php code.
View 5 Replies View RelatedOpenSUSE :: How To Install API From Source Code?
Feb 6, 2010In what directory do I need to install a tarball containing API libraries in order to import the libraries for programming?I've been trying for a few hours now to get started on my homework - but I need the GLUT api for OpenGL. After attempting to compile a simple test program, I got the error
Code:
glut.h: No such file or directory
First off, I'm not even really sure if OpenGL wasn't included in the original install or if I even need it when programming with GLUT (I truelly am clueless, lol). But after reading as much as I could, I've only been able to deduce that I need to install the API libraries somewhere on my disc.So I found the tarball, and there are special instructions for installing a linux machine. I found instructions saying to install it in the directory /usr/lib/ but is that right for the SUSE distro?Also, if anybody knows anything about GLUT/OpenGL programming + openSUSE11.2.
Software :: Install Code - Blocks ?
Jan 24, 2010I'm using ubuntu 9.10 and I would like to install code::blocks.
Here is what I did so far :
Fedora Installation :: Code To Install Php5.1.2 Using Yum On 9
Mar 23, 2009Give me the code to install php5.1.2 on fedora 9 using yum
View 1 Replies View RelatedOpenSUSE Install :: Does A Fresh MBR Contain Generic Code
Jan 13, 2010If I low level formatted a drive, then created a partition table, and installed Linuxes with their bootloaders *only* on their root partitions, would the one with the bootable flag set boot?
To put it another way; does the process of creating a partition table using Linux tools put generic code in the MBR?
Ubuntu :: How To Install Program From Source Code?
Nov 2, 2010I am wonder if somebody could take the time to teach me to install or compile a program from source.I have downloaded ZSNES from sourceforge but cannot figure out how to install it from the command prompt or using the package manager.
View 9 Replies View RelatedUbuntu Installation :: What Is The Install Code For One Another Browser
Aug 16, 2011What is the install code for one another browser? either ie (for linux), opeara, or netscape? I want to run this. [URL]It requires the add-in Grease Monkey, which is not compatible with the new FireFox.And why can't I unzip in Linux. Every time i try to open a zip or tarbal, it just errors out. Do I have to run code? What am i missing?
View 1 Replies View RelatedSoftware :: Linphone Install By Source Code
Mar 2, 2010I recently want to study the source code of linphone, and I should install it on my debian lenny linux first. I can install it by apt-get install linphone without any trouble. but like i said above, and I should install in by source code.well, the configure did not goes wrong, but after I typed "make", errors come to me, I know this is the error about the lib's. but i do not know which one did I miss,any one could tell me what the libs are they when I use the source code compile ????
View 3 Replies View RelatedProgramming :: Install To Compile Objective C Code?
Dec 25, 2010Can anyone tell me what GNUSTep packages do i need to install to compile objective c code ?
Code:
gnustep-back.i686 0.18.0-4.fc14 fedora
gnustep-base.i686 1.20.1-2.fc14 fedora
gnustep-base-devel.i686 1.20.1-2.fc14 fedora
gnustep-base-doc.noarch 1.20.1-2.fc14 fedora
gnustep-examples.i686 1.3.0-3.fc14.1 updates
[Code]...
Debian :: Install Fail - Code Based Interfaces ?
Mar 23, 2011I installed my new debain.(6.0) but its all code. (i looked it up, i need a a win X or GNOME). but since i dont know code based interfaces, how do i install it on the computer. (once Ive got my visual interface im generally fine till i hit advanced)
View 10 Replies View RelatedOpenSUSE :: Compile Some Code - Install Other Distros Repos?
Apr 17, 2011I am trying to build the java gnome gtk+ bindings on open suse and ran into a snag. the libcairo2-dev package is not apart of pensuse - how ever it is apart of ubuntu and the debian launchpad. can i install other distros repos to solve this issue? actually no i cant. how to install this package? zypper install libcairo2-dev comes back as not found.
View 9 Replies View RelatedOpenSUSE Install :: 11.2 - Grub Takes Over MBR (Error Code 22)
Jun 10, 2010I did a fresh install of 11.2. When I reboot grub came up to load opensusie instead of Windows 7 MBR. Further looking at the /boot/grub/menu.lst file. I noticed it's point to hd0,2 which is my first drive three partition. I load everything including grub to sdb3 (hd1,2). When I pointed everything back to hd1,2 now I get error code 22 on reboot. How do you restore grub to sdb3 or hd1,2. I also need to repair my Windows 7 Pro MBR.
View 9 Replies View RelatedOpenSUSE Install :: Is Kate Source Code In Another Package?
Apr 6, 2011I wanted to fix something in the Kate editor. So instead of downloading it from it's website (Get It! - Kate | Get an Edge in Editing) I wanted to download the "openSUSE Kate" source package. But as you can see, there is no source package available. I tested it with source installation of "zypper" (zypper si zypper) and it worked.Any ideas? Is the kate source code in another package?
View 4 Replies View RelatedOpenSUSE Multimedia :: Install Amarok 1.4.10 From Source Code
Nov 16, 2009Because i don't like amarok 2 I'm looking to install amarok 1.4.10 from source code.
View 9 Replies View RelatedUbuntu Servers :: Following Command:Code:sudo Apt-get Install Ssl?
Jun 4, 2010I ran the following command:Code:sudo apt-get install sslIt is suppose to give me SSL support for Apache 2.2, but I couldn't find any package information about it atA search only returns ssl-cert package.So what is in the ssl package for Lucid 10.04 LTS? How do I know what package contains what in the future?
View 2 Replies View RelatedUbuntu Installation :: How To Install Utorrent From Source Code?
May 14, 2011I'm new to linux and I'm using ubuntu 10.10 since it relished. I've download utorrent-server-3.0-25053.tar.gz. I configured intltool-0.41.1.tar.gz and libgraph-1.0.1.tar.gz using that very command installed them successfully.
View 3 Replies View RelatedUbuntu :: Install A Library - LibRaw-0.8.5 - From Source Code
Jan 28, 2010Ubuntu 9.10 is the running system. I need to install a library (LibRaw-0.8.5) from source code as the version I need is not present in the repositories. So far, I managed to extract the .tar.gz, but now I have no clue how to install it and make it work with DigiKam... I tried the sudo make install stuff, but it seems I don't do it right or what
View 12 Replies View RelatedNetworking :: Can't Install DAFS Because Source Code Is For Old Kernels 2.4
Mar 17, 2010Has somebody used DAFS (Direct Access File System)?I've found a lot of literature about this file system,where the comprassion tests promise a ~20-50% faster packet transmission,than in the strandard NFS.But I can't install DAFS,because the source code is for old kernels 2.4.Does anyone know,why did the research of this file system stopped in 2003 year,and there are no newer versions?
View 2 Replies View RelatedSoftware :: Complete And Install Source Code Files?
Jan 27, 2011I have no preior experience about to installation procedure in linux.currently i am using red hat linux which normally support rpm.I have to download a software from net which have extention like blablabla.tar.gz or blablabla.bz2.Normally most softwares can be complied in installed in three simple steps
./configure
Make command
Make install
I have not use these commands i just have a bit knowledge about it which i have mentioned here. how to extract sourse code fine and then compile and at last installed in the pc.
Programming :: Writing PHP Code - Safe To Install Xampp?
Dec 16, 2010What do I need to start writing some php code? I've seen some tutorials where they install xampp, but I see it installs php, mysql and other stuff, my slackware already has mysql, so I don't know if installing xampp would cause some conflicts. What do I need to install considering that I already have mysql?
View 2 Replies View RelatedOpenSUSE Hardware :: Razer Deathadder Install On 11.1 - Compile The Code
Jan 27, 2009I want to Install my Razer Deathadder on Suse 11.1, I allready found a programm: bu3sch.de The problem is, I cant compile the code. I cd into the folder with the source and use make (as root) and get this error:
[Code]....
OpenSUSE Install :: Kstartupconfig4 Does Not Exist Or Fails (Error Code 1)
Nov 27, 2009OS 11.2. When I try to log in my account I get the message {kstartupconfig4 does not exist or fails. The error code is 1. check}. I can only log in as root. As root, I check the file system and my files are there in /home/Myname. I can run all my programmes. The executable kstartupconfig4 is there.
View 9 Replies View RelatedOpenSUSE Install :: Kstartupconfig4 Error Code 3 And KDE4 Does Not Start
Sep 9, 2010I'm getting this error trying to load 11.3. I am running a dual boot system with WinXP and sharing a nfsp "data" partition. /home is recognized and mounted by suse. -- jim
View 6 Replies View Related