Software :: Verify Hard Disk After Copying Using DCFLDD Utility With MD5 Hash?

Apr 19, 2010

i wrote the following script for copy one source harddisk to 5 destination harddisk simultaneously.

dcfldd if=/dev/sda5 hash=md5 hashwindow=1000M md5log=md5.txt hashconv=after bs=512 conv=noerror,sync of=/dev/sdb of=/dev/sdc of=/dev/sdd of=/dev/sde of=/dev/sdf

after finising to run this command the image was trasfered to all harddirve. But no verfication message. i saw the hash value entry in md5 log. how to check the source and destination clone properly

View 3 Replies


ADVERTISEMENT

Software :: How To Write Shell Script For DC3DD Disk Copying Utility

Apr 17, 2010

I run the following command for disk duplicating from one source to 5 destination harddisk.
dc3dd progress=on conv=sync,noerror iflag=direct bs=262144 hash=md5 log=sda_log.txt if=/dev/sda | tee >(dc3dd of=/dev/sdb) >(dc3dd of=/dev/sdc) >(dc3dd of=/dev/sdd) >(dc3dd of=/dev/sde) | dc3dd of=/dev/sdf
When I run the command in shell prompt it is working fine. But I want to write a shell script for this task. When I wrote and run the shell script it gives the error message syntax error near unexpected token.

View 6 Replies View Related

Ubuntu :: Md5 Hash Of HD - Verify Exact Copy?

Oct 19, 2010

I am in the process of cloning a HD. Before I wipe the original drive I was wondering if there was a tool to create something like a md5 hash of the entire drive to verify that I have an exact copy. It does not necessarily have to be an md5 hash and any command line BASH options would work for me as well.

View 1 Replies View Related

Fedora :: Keep Getting "A Hard Disk Is Failing" Warnings From The Disk Utility

Jun 8, 2011

I am on F15 32-bit with GNOME 3. I keep getting "A Hard Disk Is Failing" warnings from the Disk Utility, very frequently. Is this a serious issue? Because I knew this to be a bug in Palimpsest DU back in F13/14. Also how can I disable any notifications from this application?

View 4 Replies View Related

General :: Gnome Disk Utility Warned That Hard Drive Had Numerous Bad Sectors / Fix It?

Feb 21, 2010

I recently tried Fedora on my laptop (previously Debian; I was bored one day) and gnome-disk-utility (palimpsest) warned me that my hard drive had numerous bad sectors. I re-installed Debian to find that this software was installed before so why had it not warned me?

When I load the disk utility, it says SMART is not available. I've got smartmontools installed, I can run a self-test with smartctl but I don't think this shows bad sectors. I've tried starting smartd on startup but the disk utility never changes from "SMART is not available". It is possible for it to work with this hardware as it works in Fedora on this laptop; any ideas?

View 3 Replies View Related

OpenSUSE :: Make Files On CD Writable When Copying To Hard Disk

Jan 3, 2011

I've set up my parents' machine running KDE 4.5 and want them to use the Gwenview import function from the Device Manager popup when transferring image files off photo CDs or other inserted media, since it's the easiest method for them to comprehend. All the files on their photo discs are r-xr-xr-x by default so they're unable to rotate or modify the images once copied to their hard disk. I want to set one specific images folder on their system to automatically force any files placed there to be rw-r--r-- (and rw-rw-r-- for another shared images directory elsewhere). It seems that umask won't work since that can only take permissions away and not add them, and I'd rather avoid getting into messy ACL configuration. Is there a way to achieve this either generically or some hidden config in Gwenview itself? I use KRename myself for such tasks but this is way too complex for my parents to understand so I need something that works without them having to do anything.

View 9 Replies View Related

Ubuntu :: Installer Encountered Error Copying Files To Hard Disk

Oct 18, 2010

I have about 170 Gigabyte free at the last of my hard. I have windows 7 and suse linux installed on the machine. When I try to install ubunto. I start to create the partitions manually because I want to add it as a third operating system on my PC. Anyway I create the 4 partitions /boot - / - /var - /home. Automatically it choose to install the boot on sda not sda 9 as the /boot was sda9. I click install.

It gives me this message "The installer encountered an error copying files to the hard disk:
[Errno 5] Input/output error

This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment." I burn another cd and do the same ... the same problem.

I try to create the partitions at the end of the hard disk not the beginning although I am sure that there is no error in the hardware but the same message. Lastly I change the boot to be created in sda 9. The same problem, when I do everything. I download Linux mint another operating system and do the same points. The same error message appeared by the way the boot is being damaged after restarting and I have to fix it from suse linux cd.

View 1 Replies View Related

Ubuntu Installation :: Installer Encountered An Eror Copying Files To The Hard Disk

Jan 17, 2010

"The installer encountered an eror copying files to the hard disk: [Errno 30] Read-only file system

This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. ..."

Before I try changing CD drives, re-formatting the hard drive (again), or cleaning the CD drive, I must add that Xubuntu did open. I got rid of all traces of the previous operating system (WinME), and Xubuntu seems to work pretty well. The installation stopped at 41% of copying files. Should I aim for a finished installation or is this fine?

View 9 Replies View Related

Ubuntu Installation :: 10.10 - Installer Encountered An Error Copying Files To The Hard Disk

Dec 2, 2010

Each time, different methods, I get this about 3/4 of the way through:

The installer encountered an error copying files to the hard disk:

[Errno 5] Input/output error

This is often due to a faulty CD/DVD disk or drive, or a faulty hard disk. It may help to clean the CD/DVD, to burn the CD/DVD at a lower speed, to clean the CD/DVD drive lens (cleaning kits are often available from electronics suppliers), to check whether the hard disk is old and in need of replacement, or to move the system to a cooler environment.

The only possibility of those is the CD being bad. But I've used it before, recently, and it was fine. I will burn another one from my other computer and try, but it shouldn't be doing this.

Question: If I plan to only use Ubuntu on this computer (no dual boot) should I make the /,swap and /home partitions all Primary or some logical, or does it even matter?

View 6 Replies View Related

Ubuntu :: External Hard Drive - GParted Wont Load Up When Plugged In And Disk Utility Doesn't Show It

Feb 7, 2011

I had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.

View 9 Replies View Related

General :: Windows 7 Disk Management Utility Doesn't Show Disk With Ext3 Partition

Oct 10, 2010

I have a 2 TB disk in an external SATA dock, formatted with a single ext3 (Linux) partition, which doesn't show up in the Windows 7 Computer Management->Disk Management utility, even as a raw/blank disk. I've verified that there's nothing wrong with the disk by connecting it to my Linux machine and mounting it, and I've verified that the dock is functioning properly by connecting a different FAT32-formatted disk, which mounts flawlessly as expected.I realize that I can't actually read the ext3 partition without additional software (e.g., Ext3IFS), but why doesn't the disk show up at all? Is there some sort of stupid anti-Linux filter built in? Is there any way to force Windows to recognize the disk, so that I can at the very least use direct block access with it?

Background: I want to clone an identical 2 TB disk onto this one. Due to my hardware layout, it's much easier to have the source disk attached to one machine and the destination disk connected to another, and do the clone over the network (the network is not a bottleneck with switched gigabit ethernet), than it is to hook them both up to one machine.(1) I did this once before when both machines were running Linux, but I've since upgraded the destination machine and decided to switch back to Windows for regular desktop use. I've got Cygwin installed, and have verified that the same basic method (dd + nc) will work, but I can't do anything if Windows doesn't even consider the destination disk to exist.I only have one eSATA port on each machine. Opening them up just to do this clone is a rather large annoyance. Also, since this is my backup disk, I'd like to eventually automate the cloning from the active disk to another one that I regularly swap with a third disk that I store off-site.

View 1 Replies View Related

General :: Using Gnokii Utility - Copy Command As Copying Files To Home Is Not Allowed

Mar 16, 2011

iam trying to send sms using gnokii utility in linux firstly i did sudo apt-get install gnokii after that i got a gnokiirc.gz file in /usr/share/doc/gnokii/sample/gnokiirc.gz file here after that i did gunzip gnokiirc.gz then i transferred my file from the /usr/share/doc/gnokii/sample to home directory by using copy command as copying files to home is not allowed so i used sudo sudo cp gnokii /home after that i changed the port=/dev/ttyUSB2 and model=AT in the gnokiirc file in the home directory and then i wrote gnokii --identify

[Code]....

i followed as in the [URL] and [URL] and except this "Note that you will need read/write permissions on whatever serial port you specify in .gnokiirc."(iam confused what is my serial port is it ttyUSB2)

View 7 Replies View Related

General :: Disk Utility And Df Show Different Disk Space ?

Nov 18, 2010

I don't understand disk sizes in Linux. I have a 500GB drive. It's ext4. I have run "tune2fs -m 0" on it to reserve the amount of space reserved for root to 0.

I'm using Ubuntu 10.04 that comes with a Disk Utility. When I run "System->Administration->Disk Utility (palimpsest)" the disk shows up as 500GB (see picture). But when I run df -h it shows up as 459GB. So, I don't understand the discrepancy.

When I run df I get the following:

Question: Why is Disk Utility showing me something different than "df"?

View 6 Replies View Related

Hardware :: Master Hard Disk Error After Installing Ubuntu 8.10 / Hard Disk Died

Apr 8, 2009

after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work

View 3 Replies View Related

Ubuntu :: Small Tool To Verify A Burned Disk?

Mar 10, 2010

I'm looking for a small terminal tool to verify a burned disc and compare it to an iso file.

I googled for verify burned disc/dvd - no mateches.

There is a thread, which tells how to do it in k3Burn - but I need it on terminal to use it with ssh.

View 6 Replies View Related

Ubuntu Installation :: Copy Hard Disk Have 10.04 And Ext4 To 1000 Hard Disk?

Sep 23, 2010

I want to copy hard disk have ubuntu 10.04 and ext4 to 1000 hard disk for new 1000

View 2 Replies View Related

Hardware :: Adding Second Hard Disk With Windows To Boot With Grub On First Hard Disk

Jul 7, 2009

I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.

View 3 Replies View Related

General :: Changing GRUB From An External Hard Disk To The Internal Hard Disk?

May 14, 2010

I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?

View 2 Replies View Related

Hardware :: Check Hard Disk For Errors. Possible Hard Disk Failure?

Jun 21, 2011

I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:

Code:
$ sudo hdparm -I /dev/sdb
[sudo] password for brian:

[code]...

View 6 Replies View Related

General :: Error Cannot Find Disk At [hash-code - Looks Like 0ace5f When Booting OpenSUSE 11.2 GNOME-LIVE (64bit)?

Jan 29, 2010

I am in the process of re-DL-ing the ISO as the checksums didn't match.

Mind you, that was with a shell extension in Win-Lose. Who knows.

Anyway:

I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:

Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.

At least one of them said "will reboot in 120 secs". Saves me the trouble!

View 2 Replies View Related

General :: Use Hard Disk Image Like A Regular Hard Disk?

Apr 6, 2010

If you have a hard disk image (including partition table, multiple partitions,...), is it possible to let Linux treat it as a regular hard disk?

By "regular hard disk" I mean I would like to have the image show up as, for instance, /dev/hdx and its partitions as /dev/hdx1,...

(I know I can mount one of the partitions in the image using "mount -o loop,offset=x ..." but I don't really like this option.)

View 2 Replies View Related

Ubuntu :: LVM With Palimpsest Disk Utility

Apr 3, 2010

I'm working on setting up a new NAS. I installed Karmic desktop on a 160 GB HD using the default settings.

Now I've added three 1TB drives and want to make them a RAID-5 array with LVM on that, and 1 ext4 partition. I want to use LVM so I can add drives and expand the array later.

So far I've been using Disk Utility (Palimpsest Disk Utility) and it's been great! A wonderful addition to Karmic! I got the RAID-5 array setup with no problems using disk utility. So now I have a 2000 GB raid-5 array setup in Disk Utility and I need to get LVM setup.

Problem is: I don't see any sign of LVM in Disk Utility. I've been googling all night and I can't find any documentation for setting up LVM in Disk Utility, just people saying that it's supported.

I tried installing the lvm2 package, rebooting, and then looking around again. No luck.

So, what am I missing? Should there be LVM options in Disk Utility? Where is it? Is there a better/easier way to configure lvm?

View 5 Replies View Related

Ubuntu :: Raid 5 In Disk Utility?

Jul 17, 2010

point me in the direction to get a step by step guide to setting up a Raid 5 using the Disk Utility and 3 spare drives? I have the main OS files on a 80gig drive and I would like to mount the 3 drives as Raid 5.Just shooting in the dark now.. Screen shot is attached. [URL]...

View 1 Replies View Related

Ubuntu :: Disk Imaging Utility ?

Mar 29, 2011

I'm searching for a GUI disk imager, something, that will be the GUI front end for dd. Ghost4Linux G4L is not an option, I want to be able to make security backups of my USB thumb drives, CDs, DVDs...

View 9 Replies View Related

Ubuntu :: RAID Via Disk Utility?

Jul 20, 2011

Has anybody ever used Disk Utility to set up software RAID? Here I am running terminal commands (I'm a terminal junkie) and I just happen to stumble across instructions that indicate "Or you can just set it up through Disk Utility."

Sure enough in disk utility, it looks like all of the configurable options are there. It makes me wonder, though... is this kind of GUI functionality something that isn't really solid? Or does it operate predictably and effectively?

View 4 Replies View Related

Ubuntu :: 11.04 Disk Utility Not Working ?

May 2, 2011

I cannot get the Disk Utility to launch, when I click the icon the cursor rotates and stops but nothing happens.

I uninstalled and reinstalled the Disk Utility, still not working.

I have three HDDs and many partitions. I multi boot Linux, Win 7 and Win XP.

All OS's boot cleanly using EasyBCD boot loader.

It did not work in 10.04 or 10.10.

View 9 Replies View Related

Fedora :: Partitioning Hard Drive With F14 Utility

Jun 28, 2011

I have installed Fedora 14 along with Libre Office along with some other applications so I am learning slowly, re-learning really. However I am having a difficult time understanding partitioning. I would like to make another partition for Windoze. I also cannot get a USB mouse to work. I have run some commands to gather disk info I will refrain from list it here as it is a lot of data. At least until asked to do so. What I have run so far is fdisk -l, df, blkid, & cat fstab.

View 8 Replies View Related

General :: Mount From The Old Hard Disk To The New Hard Disk

Jun 30, 2010

mount from the old hdd to the new hdd i mean (Hard disk)

View 2 Replies View Related

Ubuntu :: Erase The Partition By Disk Utility?

May 17, 2010

i erase the partition of ubuntu by disk utility in mac oswhen i restart my laptop and select windows os partition but windows os not bootingand the screen show to meerror: no such partition.

View 1 Replies View Related

Ubuntu :: Disk Utility - Expand Array

Aug 31, 2010

When I use disk utility to expand my RAID array it creates a partition on my 1.5TB drive which it would like to add to the RAID 5.

However, none of the drive existing on the RAID are partitioned so what I think has happened is the partition itself has created a difference of about 2 million bytes smaller than the others and thus unable to add the component.

How can I specify the exact bytes for my hard drive partition so that I can add this to the array?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved