Can't get into GRUB to reset root password. Hitting ESC only toggles between verbose boot information and progress screen. Holding SHIFT does not bring up the GRUB screen for Runlevel editing. Only found correct key strokes once and forgot what they are. While I'm here, does anyone know how to choose and permamently select a kernel version for bootup?
View 3 Replies
I already try everything I could find on google, but i canot put this to work! Every time I try to enter in Windows 7 through grub, I get: "Missing bootmgr" I look to /boot/grub/grub.conf and the Windows 7 is looking for the right partition and I already try to go in "Repair Windows" by the CD and nothing.
View 6 Replies View Relatedwe have an oracle application server on red hat 4.6 upon booting it comes up with error: attempting boot from hard drive (c GRUB)
View 2 Replies View RelatedSlackware is my main desktop, however, I decided to give Fedora 15 a try and overwrote the MBR installing it with grub. Now I want to keep fedora and its grub, just I can't get slackware to boot.Fdisk:
Code:
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
[code]....
When i boot my PC, i get this in my Fedora 16 distro. I have tried as following but none allowing me to boot anymore.
Grub loading.Welcome to GRUB!
error: file not found. Entering rescue mode...
grub rescue>
grub rescue> ls
(hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1)
grub rescue> ls (hd0,gpt2)/
./ ../ lost+found/ memtest86+-4.20 grub2/ System.map-3.1.0-0.rc3.git0.0.fc16.i686 config 3.1.0.0.rc3.git0.0.fc16.i686 grub/ vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 elf-memtest86+-4.20 initramfs-3.1.0.0.rc3.git0.0.fc16.i686.img initramfs-3.1.0.0.rc4.git0.0.fc16.i686.img System.mpa-3.1.0.0.rc3.git0.0.fc16.i686 config-3.1.0.0.rc3.git0.0.fc16.i686 vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686
since i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I just want to change the text displayed on bootup from "Desktop - opensuse - lotsaversion numbers" to "OpenSUSE 11.3".I tried doing it during installation, but it didn't seem to take affect, and now it won't let me do it through Yast
View 5 Replies View RelatedI would like to modify the boot loader settings and triedo open the file grub.confHowever, it is said that the file could not be opened, as seen in the attachment.Tried to authenticate as 'root' before opening the file, but the problem still exist...
View 10 Replies View RelatedI've set up a triple boot xp, vista, and fedora 10. The problem is that I want to remove Fedora grub, so the bios can give me all 3 choices to boot from, be it xp, vista or fedora. At the moment fedora grub boots, from there i am able to choose other operating systems. But I want to use windows boot loader, from there i would like to have windows give me the choice of different OS's to boot from.
View 9 Replies View RelatedI created a key for an ssl site with a passphrase. Worked really well and enjoyed doing it. I then shut down the lpatop and drove back to my parents for easter...
Now Fedora won't fully boot, and I'm just have the line that creeps along the bootom. I've tried a few things, but not having any joy. I obviously need to enter this passphrase, but how should I do this?
Do I go out any get some CD's to make a boot disk? Or is there a way to disable the graphical boot options from grub?
So, I want to write a bash script that will allow me to scp and ssh to a different server in the network.
Though, I dont know how to get rid of the inputting passwod line if both commands.
After entering the gdm I'm being asked "Would you like to enter a Security Context [N]?" during login. I've had a look around online but can find nothing final about this.
View 1 Replies View RelatedI have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
I just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
Been using fedora for a few years now, got a boot error this morning I just have no idea were to start looking. Got a luks encrypted root, getting the following after entering pass-phrase:
...
Starting Stdio Syslog Bridge.
Starting /dev/cgroup failed, see 'systemctl status dev-cgroup.mount' for details.
[code]....
I have a system installed fedora 13 which I have updated yesterday. Now when I am trying to start system it restarts immediately after entering the user name and password. I am not the expert user.
View 1 Replies View RelatedI'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious.I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users.Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways?(I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password.
View 2 Replies View RelatedI want to display motd after entering username but before entering password. Is it possible?
View 8 Replies View Relatedam trying connect to server via ssh after entering the password it's just keep stuck !!!
*** NOTE : i was using the server and am sure about the user name and password ...
Problem: I have installed two Ubuntu servers, 10.04 32-bit and 10.10 64-bit, in a multi-boot environment (also have FDOS and WinXPsp3). The 64-bit will not boot because grub can't find the UUID for the disk with the 64-bit system.
Brief Background: Installed 10.04 LTS two months ago with no problems. 10.04 is in a primary partition on hda with FDOS.
Installed 10.10 (64-bit) in a new primary partition on the same hd. The install seemed to go ok, but the MBR and the fs on the 10.04 were corrupted; could not boot. Restored drive, and rebuilt grub.
Installed 10.10 on separate hd (hdb). In grub step all OS's were recognized so I pointed the grub to hda. Grub failed to boot.
Rebuilt grub from 10.04 on hda. All systems recognized but 10.10 will not boot because it says it cannot locate the UUID specified.
Compared the grub.cfg for both systems, the UUID specified for hdb is the same. Also, when I mount the drive for 10.10 on the 10.04 system the drive UUID is consistent.
I know I must be missing some thing, but I know not what. Have searched and can't find any clues. All other OS's boot ok.
Hardware: AMD64 4GB, 2 internal IDE drives (hda and hdb), 1 internal SATA (hdc WinXP), various USB and Firewire Drives (no bootable systems).
I am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies View RelatedI am starting a small business for computer repair and was wondering if there is any software available for entering and keeping track of service calls. Right now I am using Kmymoney for keeping track of finances and it seems to be working out ok. I also use day planner to keep track of appointments. However, I haven't found anything to keep track of service calls. Currently, I am pretty much trying to adapt spreadsheets as a "get by" solution but its not that pretty.
View 9 Replies View RelatedI'm trying out puppy linux, as I have an old system, and the new Ubuntus do not work on it.
Anyway,I cannot boot from my hard drive but only from the floppy.I'm just not too keen on always booting from the floppy.
Here is the Menu.ls file:
i installed slackware then i unistalled it and installed debian then i decided to go back to slackware but it wont boot because i have the grub boot loder how do i fix this
View 2 Replies View Relatedi am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I am having an issue with my GUI desktop display. I switched from the desktop to a virtual terminal using Ctrl+Alt+F2. Upon returning to the GUI desktop (Ctrl+Alt+F7), my display is all garbled up. I tried changing the resolutions, and it does not make a difference. I tried rebooting and the display is still bad.
View 1 Replies View RelatedFor some unknown (to me) reason, "Ctrl+Shift+u, <unicode number>" doesn't work in F12. I had gotten quite used to this method in order to input several symbols and if you know what you want, it is a lot faster compared to using the character map. This was working in all recent Fedora versions.Does anyone know how to enable this functionality?
View 4 Replies View RelatedI just recently installed a kernel, everything works fine after reboot except. When I use nano -w /boot/grub/grub.conf I get /boot/grub/grub.conf: No such file or directoryIs there something i have to do after installing a new kernel in Gentoo Linux.I can't access my /boot all that appears there is a symlink to /boot How can i see my kernels located in /boot.
View 3 Replies View Relateddid a Fedora 12 installation today but Grub wont boot XP. I had WinXP on the first partition. It's a 40gig hd. 20/20 for both Linux and Windows. XP on the first partition. How do i map XP using Grub
View 1 Replies View Related
