Fedora :: Software For Entering And Keeping Track Of Service Calls?
Feb 10, 2011
I am starting a small business for computer repair and was wondering if there is any software available for entering and keeping track of service calls. Right now I am using Kmymoney for keeping track of finances and it seems to be working out ok. I also use day planner to keep track of appointments. However, I haven't found anything to keep track of service calls. Currently, I am pretty much trying to adapt spreadsheets as a "get by" solution but its not that pretty.
View 9 Replies
ADVERTISEMENT
Sep 21, 2010
I would like to have a way to keep track of my working hours easily.
Insert arrival and finish times and have the difference in decimal. For example, if I start at 8:00 and finish at 9:30, 1.5 should be added.
I tried to do this with Calc but couldn't figure it out. I set one column to have entrance time, another one to have exit time and a third one with the difference("=B2-C2"). The result is in a timestamp format and not decimal. If I use another cell to say something like HOURS(D2) it rounds the number rather than give a decimal(would give 9 for 9:20:00).
EDIT: solved by doing =24*(B2-C2)
View 1 Replies
View Related
Jun 8, 2010
I would like to keep track of not only what bash commands I used and when, but also where they were issued from, i.e. what was the current working directory when I issued "foobar" on a particular day and time. Can we ask bash history to keep track of working directories too? I have tried to get an idea of this reading the enormous "man bash", but I don't seem to have an answer yet either way.
View 11 Replies
View Related
Jun 6, 2010
the data usage information from the carrier is often several hours old and is accessed in some arcane ways (logging into their website, sending a specific SMS message at best). Here's my idea: single-session data usage is perfectly reported by ifconfig ppp0. The problem is, how tokeep track of previous sessions accumulate the numbers rollover to zero at specified date To be able to do this across computers means that one needs to store it on the modem/SIM card itself. (As a specially crafted SMS message, or a contact).
View 2 Replies
View Related
Mar 13, 2011
I'm trying to produce a alphabetic, non-repetitive list of all System service calls in all c files located in a folder. Here's what I got so far.
grep -ow '[A-Za-z]*SYS[$][A-Za-z]*' *.c | sort
Which produces all system service calls in alphabetic order I just need to find out how to make it non-repetitive.
View 3 Replies
View Related
Jul 9, 2011
Is there some blog, changelog, or place where i can track what issues get fixed in the opensuse gnome 3 implementation, or what features are bein added, what changes are bein made, etc.?For example, if there is some bug in opensuse with gnome 3, where can i read that it has been fixed in the dd/mm update, or that new feature xxxyyy was added in dd/mm update, etc.Im talking about issues, fixes, updates related to gnome 3 with opensuse. Not just opensuse with 2xgnome or kde.
View 1 Replies
View Related
Oct 26, 2010
What is the real difference between system calls and normal function calls. Ultimately function calls too would be passed to kernel for some or the other work.
View 7 Replies
View Related
Feb 28, 2010
i can smb in centos 5 and i run service smb restart, it shows :smb: unrecognized service..... i run rpm -qa |grep samba,it shows
samba-common-3.0.33-3.7.el5
samba-client-3.0.33-3.7.el5
.....
View 2 Replies
View Related
Nov 6, 2010
I need to start a service before network service How to?
View 1 Replies
View Related
Mar 15, 2010
I need to write a script. In which, the 2nd part commands need to run under another bash shell environment.The enter_antoher_bash_env.sh will setup a new shell environment, call "bash". The rest commands need to run under the new env. (I cannot change this script too. )If I run these command one by one manually, it works of course. If I put them into a script, enter_another_bash_env.sh won't return because it calls "bash" command inside.
View 10 Replies
View Related
Apr 1, 2010
I created a key for an ssl site with a passphrase. Worked really well and enjoyed doing it. I then shut down the lpatop and drove back to my parents for easter...
Now Fedora won't fully boot, and I'm just have the line that creeps along the bootom. I've tried a few things, but not having any joy. I obviously need to enter this passphrase, but how should I do this?
Do I go out any get some CD's to make a boot disk? Or is there a way to disable the graphical boot options from grub?
View 1 Replies
View Related
May 3, 2011
After entering the gdm I'm being asked "Would you like to enter a Security Context [N]?" during login. I've had a look around online but can find nothing final about this.
View 1 Replies
View Related
Jun 1, 2010
Can't get into GRUB to reset root password. Hitting ESC only toggles between verbose boot information and progress screen. Holding SHIFT does not bring up the GRUB screen for Runlevel editing. Only found correct key strokes once and forgot what they are. While I'm here, does anyone know how to choose and permamently select a kernel version for bootup?
View 3 Replies
View Related
Jul 3, 2011
Been using fedora for a few years now, got a boot error this morning I just have no idea were to start looking. Got a luks encrypted root, getting the following after entering pass-phrase:
...
Starting Stdio Syslog Bridge.
Starting /dev/cgroup failed, see 'systemctl status dev-cgroup.mount' for details.
[code]....
View 2 Replies
View Related
Mar 18, 2011
I have a system installed fedora 13 which I have updated yesterday. Now when I am trying to start system it restarts immediately after entering the user name and password. I am not the expert user.
View 1 Replies
View Related
Oct 6, 2010
I am using fedora 12.I have two internal drives. Both are ntfs. Whenever i click on them it prompts to enter root password. But i want to mount them as normal user without entering any root password. How can i disable it so that i am not asked to enter root password everytime i mount the drives.
View 2 Replies
View Related
Nov 25, 2009
I have a really bad delay on skype. The calls start off fine, but quickly the audio falls behind. I've messed around with a bunch of different audio settings and nothing helps, only completely removes audio.
View 1 Replies
View Related
May 23, 2011
Anyone know if it is possible to create an alias that calls a script that will SU to a different ID and log me in.
Currently I have to log in using my ID and the SU to an administrator ID. Just kind of a pain to do all the time.
View 3 Replies
View Related
Feb 14, 2009
I'm setting up my first Linux install and I was wondering if I would be able to boot Fedora from a CD while keeping every other file on my computer, or in other words if I would be able to put the /boot partition onto a cd. I've also read that Linux can be booted entirely from a logical partition. If that's true then can anyone help me in setting that up. Mostly my problem is I already have four primary partitions, one being a logical drive with plenty of free space in it, and I can't get rid of the primary partitions I already have.
View 1 Replies
View Related
Nov 13, 2010
I hope this is the right section, it looks like though. I have a small nas ( via artigo a2000 ) with 2 sata hd 1tb each with raid 1 and lvm on top configured and working great.
sda1 and sdb1 ==> md0 raid1 for /boot
sda2 and sdb2 ==> md1 raid1 for swap
sda3 and sdb3 ==> md2 raid1 as physical volume then volume group and lvs on top ( / is a logial volume of these )
I wish to upgrade the current fedora 12 32bit installation I have on it doing a fresh install. But because I have a lot of data on md2 ( 600GB worth ) which I don't want to copy across somewhere else first, I need to know how ( i am pretty sure i can ) to mount md2 during the installation. This way I can use the data I already have on it.
View 3 Replies
View Related
Nov 30, 2009
After installing all possible backend needed to create accounts, I was able to create my yahoo account, but when I try video calling my friend how uses m$n on xp, I get the message "connecting....." but on my friend's pc It doesn't show that I'm calling him. Can I have video calls with contacts using another IM software using my yahoo account?
View 6 Replies
View Related
Jun 8, 2010
However, every time snmptrapd gets a snmp notification, it aborts. In debug mode, it reports a buffer overflow detected. I've tried another core 13 and a core 12, with net-snmp 5.5. On these three systems, snmptrapd behaves the same. Here is my snmptrapd.conf,
disableAuthorization yes traphandle default touch /root/a.txt I triggered snmptrapd with, snmptrap -Ci -v 2c -c public localhost "" "1.3.6.1.4.1.8837.4.1.2.1.2.1.6.4" 1.3.6.1.4.1.8837.4.1.2.1.2.1.6.4 int 500 Same result I got with my firewall snmp traps. Some other different scripts replaced in traphandle default, got the same. A small portion of debug info listed,
[Code]...
View 2 Replies
View Related
Apr 26, 2011
what is the command to show the recent system calls in the OS?
View 2 Replies
View Related
Jun 5, 2010
I really hope this is revelant here, and that someone can help. I have been using fedora for a while now, and I love it. However my brother has started using ubuntu, and wants me to at least try it, which I agreed to. I have created a partition for ubuntu, using Gparted, in fedora 13. My question is, how do i install ubuntu onto this existing partition, whilst keeping the Fedora boot loader, which I think is absolutely fantastic, and would love to keep. In summary; how to install ubuntu on an existing partition, and add it to the fedora boot loader options?
View 14 Replies
View Related
Dec 8, 2009
For some unknown (to me) reason, "Ctrl+Shift+u, <unicode number>" doesn't work in F12. I had gotten quite used to this method in order to input several symbols and if you know what you want, it is a lot faster compared to using the character map. This was working in all recent Fedora versions.Does anyone know how to enable this functionality?
View 4 Replies
View Related
Jun 25, 2010
I'm using Core13 for zabbix, and trying to make snmptrapd works on it.
However, every time snmptrapd gets a snmp notification, it aborts. In debug mode, it reports a buffer overflow detected. I've tried another core 13 and a core 12, with net-snmp 5.5. On these three systems, snmptrapd behaves the same.
Here is my snmptrapd.conf,
disableAuthorization yes
traphandle default touch /root/a.txt
I triggered snmptrapd with,
snmptrap -Ci -v 2c -c public localhost "" "1.3.6.1.4.1.8837.4.1.2.1.2.1.6.4" 1.3.6.1.4.1.8837.4.1.2.1.2.1.6.4 int 500
[Code]....
View 1 Replies
View Related
Jan 1, 2010
Some times i need the older version of some packages in my system...side by side with the new one.i.e mostly i found older version openssl package for supporting dependency of some programs Can I keep the following libraries at the same time in my system by installing multiple versions of openssl?
[Code]...
View 3 Replies
View Related
May 25, 2010
I'm running Fedora 13 (fully updated) with Firefox 3.6.3 and I'm noticing that Firefox isn't remembering window dimensions across launches (eg. I have to resize Firefox everytime I run it). This is affecting the main Firefox window as well as the bookmarks window.
View 8 Replies
View Related
Apr 16, 2010
How to track where the files go when I issue:
yum intsall php
I wann know where exactly the files go? What will change?
View 3 Replies
View Related
May 2, 2009
Been away for awhile (Fedora 5 or 6 was what I last ran). Just downloaded Fedora10 and installed it on a drive here, running great, looking slick. What drove me back to Fedora (Linux) is my need to create a simulated webserver to locally test stuff without messing up my live site. I had successfully installed php and mysql, using the specific versions my host uses. I then downloaded the RPM of the specific apache instal, followed the install directions and ran into a snag. Last step, says, "$ PREFIX/bin/apachectl start". I did that and received an error. Tried just typing apachectl start, and it worked. Upon my surprise it loaded Apache 2.2 (mine was a 1.3 release), and of course is Fedora-branded.
My questions are as follows:
Do I know somehow how two versions of Apache on? How do I start up the 1.3 one if so?
If not - How can I remove the 2.2, and what will have become of the 1.3 I installed?
View 3 Replies
View Related
