General :: Empty Map In Nautilus But Not In Terminal?
Aug 25, 2010
Lucid 10.04 distro. On an ext usb hd I have 250วด info in 6 directories. All directories are visible in terminal mode mod 755. All directories are visible in nautilus, all files are visible except in one directories which contains 200gig of videos.A file search shows all in all directories. All files can be opened mv, cp etc. I can move a file from this directory to another and all is well.In my Debian 5.05 distro with the same hd and directories etc, this problem does not occur.
Currently if I have folder "/abc/def/ghz" open on Nautilus and I want to run a terminal command on that folder I have to manually open the terminal and go to that folder.I'd like to know if there is a way to have a button or a short cut that'd allow me to open the terminal right in the desired folder.Something like pressing CTRL ALT and have the terminal popup in the the current folder.
When browsing my external hard disk I noticed that Nautilus' side pane marks directories that contain files as empty. Is this a bug or a misconfiguration on my part?
I've fallen in love with Terminator as a replacement for the standard gnome-terminal app.
However, I'm also very much in the habit of using the nautilus-open-terminal extension for launching new terminal sessions.
I'd like nautilus-open-terminal to launch Terminator rather than gnome-terminal.
A quick search of my system and the web didn't reveal anything. i didn't find a gconf setting to control this. A quick look at the source code didn't help much either.
I'm using an external USB Iomega Rev 70GB HDD. (Have been for a few years). It uses UDF format for higher transfer speeds of large files. (This is not an option, & not changeable), therefore natively recognised since 2.6.20, I think. (But no official Linux support).
Occasionally though, I run into problems such as can't format a disk in Linux, need to boot to Wins to do it. Also like today: So I have a bunch of comic pdfs & cbrs on it, mix of .rar files & folders. They were there yesterday. Today I went to read something and I couldn't see them. Thought maybe I'd deleted it by accident, but no. Looked at the drive in terminal and I can see the "missing" files and folders fine, but can't see them in Nautilus to open in Comix.
-Tried setting all permissions on the whole drive to R/W/E through Nautilus.
-Files & Folders aren't hidden.
-Tried rebooting.
-Tried using Administrator Nautilus.
-Thought it might be a re-emergence of the recent Nautilus Preview bug, so swiched File Preview off.
I have some adlib music files I want to be able to double click from Nautilus.. the command line program that will play them is adplay.. However, if I just do that, then when I double click, the music plays, but no way to stop it!I tried "gnome-terminal adplay --output=oss" as the custom command but it doesn't seem to work.. I need it to open the terminal with adplay so i can stop the music when im done, since there's no GUI front end for this program..ALSA is the default for this app, but it skips horribly, and OSS was the only output device that works..
I am trying to create a script that takes a network resource off the network, and opens it in nautilus to recover files. Everything is working fine, except for the nautilus part. Nautilus opens just fine, but the script opens it and does not go on, even when nautilus is closed. when running another terminal instance with nautilus in it, when nautilus is closed, the extra terminal just sits there.
from the command line.I know there is a tool called ne-terminal-config. But I want to tweak configurations of the embedded terminal that ne-terminal-config doesn't allow. I'm assuming there is a config file somewhere that I can manually edit.
I am using Karmic Koala and not finding uniform behavior regarding internal hard drive mounts. I have placed commands in fstab to mount partitions at boot. One a separate hard drive and the other a separate partition on the boot drive that I set up during OS installation. After boot, GParted shows both of these partitions mounted on the right points (in my case, /dd and /opt). Both the mount points have rw permissions for all. But neither "ls -l" in the terminal nor nautilus shows the drives. They are evidently invisible.I searched the net for hours looking for an answer to this and couldn't find it. Hope someone knows why this is going on.
Like the title says, I want to be able to open the directory I'm browsing in nautilus.To clarify this, as I barely understand what I said, I'll give an example.
Code: cd ~/what/ever/this/is/complex/path Hmmm.... A lot of files in here with long complex names and I only want to move certain ones..... Better open it in nautilus with my handy dandy script/alias!
what I'd like to have is a way to open a terminal directly from Nautilus and the terminal's active directory should be the one that is opened in Nautilus. Does Nautilus have a plugin system or is there another way to add this functionality?
I was trying out bash scripts to see how to mount NetGear readyshare. I can do so using Nautilus and selecting Network but I wanted to be able to do so from a script. I don't know how it happened but when I clicked on Places/Documents it opened a terminal instead of Nautilus. This applies to all the folders in the Places menu but I can still get Nautilus by clicking Places/Computer and below.
I just upgraded from Maverick 10.10 to 11.04 64-bit and I have the following problem: every program that provides an "open file or folder" function such as synapse -> open folder, firefox downloads open folder, deluge open, instead of opening nautilus in the desired folder (default behavior of 10.10), it just opens a gnome-terminal.
I am a final year student doign Computer systems engineering and just been introduced to linux. While still strugling to catch up with the commands, I am now given an assignment under shell scripting.I seriously am strugling to understand this question, can you please assist me.Here follows the assignment:
Operating Systems III Some tips e.g. (test if a file is empty, if it is then display "file is empty" otherwise display
I install some package, I don't know what and now my menu file of all gnome-terminal, nautilus its not show, someone know what is the packet to do this? The firefox have menu ok, only the applications like gnome-terminal hide the menu.
For my broadband Internet I have several computers connected by cable to a Netgear DG834Gv5 router which has its own firewall.I have the wireless turned off by choice.My desktop and laptop are Linux only. (Ubuntu lucid lynx) I use the same username and password (very strong password) on both.What I want to know is can I set things up so I can browse and copy files between the computers using say nautilus on either computer?if not nautilus then I would happy to be able to do the same via a terminal window.I am not necessarily wanting to be told how but either what to Google for or where to find it.
I installed nautilus-open-terminal, and now the option "Open in Terminal" does show up in the context menu for me in Nautilus, and clicking it does open a terminal. But it just opens to the home directory, every time, same as if I'd opened a terminal in the ordinary way. I've tried to look for solutions to this, but I can't find anyone that even has the same problem. Other people complaining about it all seem to be saying that a terminal doesn't even open for them, which is not the case for me.
I want to know, how to make a shortcut of "open terminal" in the nautilus toolbar. I have installed "nautilus open terminal", there is option for opening terminal in right click menu and file tab in menu bar. But i want the shortcut to be in toolbar. I tried to edit "/usr/share/nautilus/ui/nautilus-navigation-window-ui.xml" file, but i don't know the action name, i could not add that shortcut.
I basically am hoping for a line of bash script I can put into "Open With" for folders so I can get a terminal with the right path. I hate manually typing in paths to places when I am looking right at them in nautilus. "gnome-terminal" doesn't work - it just opens a terminal to ~.
I looked through google but can't find an answer for this..... say I have a directory called "files"; this directory contains several other directories..... what I wanna do is delete ALL the files within the subdirectories, but NOT delete the subdirectory. Can this be done easily without having to run a command for each subdirectory?
I have a large file that a process writes to. I would like to empty that file. If I delete it the process will stop writing to it. Just flush the content but keep the file.
I have Ubuntu in one partition . The partition is about to be full..I have a spare partition which I thought could merge with the existing..But I guess it is not possible. I am slightly confused with the way linux stores the files. There is a root directory and within that there are boot ,Var,tmp and home..
Suppose I install an application from a package manager , I really do not understand where the path is ...Supose I want to store certain new applications in the spare partition , how do I tell the system? Also while installing it doesnt give a choice regarding the path ...All I see is a couple of files exracted and when it completes , it sits on the menu neatly. From a storage perspective how do you gain control? Say in Win , normally any package will ask for the path which you can customize..How do you plan the storage of files in Linux?
Simple question but even google does not come up with an answer, seems to be too easy that someone else asked it ;). Could anyone tell me what is the shell command to empty the garbage bin under Linux?
I just had a bad experience with a server, and now i have a 17GB lost+found. It appears a lot of the stuff in there are folders which are empty. Since those really serve no purpose as far as recovering data from what I can tell, is there a slick way to delete just the empty folders from my /data/lost+found folder, leaving me with just the stuff I truly need to look through?
