I have SLES11 installed on server. I have attached 2 SAS cables which are connected to External storage device. I have connected 3 machines to external storage device. It shows total 6 ID�s. I want to know which 2 are from which machine. I would like to find out the WWID number of HBA�s on SLES 11 machine.
View 11 RepliesI have SLES11 installed on server. I have attached 2 SAS cables which are connected to External storage device. I have connected 3 machines to external storage device. It shows total 6 ID�s. I want to know which 2 are from which machine. I would like to find out the WWID number of HBA�s on SLES 11 machine.
View 3 Replies View RelatedWhy does unix ps -l whows one number in column "PRI" but in same time ps -o pri shows another number? cpu and nice are zero for those processes
View 1 Replies View RelatedI'm having trouble running nnom under SLES 11 SP 1. The only version of nmon I can find is for SLES 10, but from what I can tell it should work. However, it isn't. When I try to run nmon_x86_sles10 I get the following error:-
Code:
nmon_x86_sles10: malloc.c:3096: sYSMALLOc: Assertion `(old_top == ((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - _builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) old_size) >= (unsigned long)((((__builtin_offsetof (struct
[code]....
how to get nmon to work on SLES 11 SP 1?
How do you change the hostname in SLES11? I have normally used the /etc/hostname file and rebooted the server in other distros. I only notice the way to change it is in yast2 -> network devices -> network settings -> Hostnames. I am looking for where it is stored because I want to write a script to update it (apart of a server deployment process).
View 9 Replies View RelatedHow do I run ifplugd on SLES 11 ?
View 1 Replies View RelatedI 'm using vmware server to virtualized suse linux enterprise server11 as the guest operating system under my main OS of window 7 professional version, but when i plug on the pen drive, SLES11 (guest OS) that hosted under vmware with window 7 prefessional as main OS can't detect of my pendrive but i can do this before at window XP version...
View 1 Replies View RelatedSo I've got a Dell Poweredge R410 with SUSE Linux Enterprise Server 11 installed and my boss wants me to configure it like this:
Eth0 - No IP address (on general tab, activation set to "never")
Eth1 - No IP address (on general tab, activation set to "never")
Eth2 - No IP address (on general tab, activation set to "never")
Eth3 - No IP address (on general tab, activation set to "never")
bond0 - eth0, eth1, eth2, eth3 selected (Activation set to "On boot") No IP Address
bridge0 - bond0 selected (Activation set to "On boot"). IP, subnet and hostname defined.
The DNS and routing has all been set correctly. The problem is when I set the network configuration as above I cannot connect to the network I'm unable to ping the gateway. I only have 1 cable connected and it's plugged into eth0 but apparently this doesn't matter. If I delete the bond and bridge and instead apply the settings to eth0 it connects no problem but my boss wants to use load balancing and states that that setup should work.
at our SLES11 server there is an iscsi tape roboter from OVERLAND attached. From this great forum we learnt to use udev rules in order to fix the device name for the media changer /dev/sgN where N is altering after each reboot. Here is the udevinfo output of our tape changer:
#udevinfo -a -p $(udevinfo -q path -n /dev/sg5)
looking at device
'/devices/platform/host4/session1/target4:0:0/4:0:0:2/scsi_generic/sg5':
KERNEL=="sg5"
[code]....
During SLES11 installation I had to provide additional driver for ServeRAID-M1015 hardware RAID controller because linux didn't see any disks. Now I have to upgrade SLES11 to SLES11SP1 which may include installation of new kernel.
Questions :
1. What happens with this RAID driver after installing new kernel ?
2. Will Linux box start up after installing new kernel ?
I didn't have any luck finding the solution for not getting opengl working on a SLES11 server with a remote X-Win32 client. As a reference I've used the tool "glxgears" for testing.We have two servers. One (server A) with SLES10 and the other (server B) with SLES11. We use X-Win32 (ver. 9.x) as an X-server on a Microsoft Windows client machine. Both servers are connected to with ssh with X11 forwarding enabled (Xclock works fine on both).Starting glxgears from server A works fine; Three nice gears are displayed.
View 1 Replies View RelatedCurrently I run into a rather confusing case. I met bellow mount errors when I was about to enter the rescue mode on SLES11:
Code:
Loading Rescue System (1/2) (19784 kB) - 100%
Loading Rescue System (2/2) (10268 kB) - 100%
Reading Driver Update...
[Code].....
Then I tried to extract the rescue image and to see what's wrong in the scrip, but it turn out that there is no boot script under /etc/init.d directory, either a similar one that may as it.
where is the script or which is the script does the mount things in rescue image?
PLUS, I can see /etc/init.d/boot script in SLES10 rescue image.
i try to install web cam in redhat by useing wine, but it showing no. web cam connected even if i connnect
View 1 Replies View RelatedI have installed Ubuntu 10.04 for ma Pc..I have successfully installd the o/s but usb drivers are not detecting to my pc.But I connected ma mabile using data cable..Its working.
View 3 Replies View Relatedusb based device is showing in the log message using command "lsusb -v" why this is not showing
View 1 Replies View RelatedI have a USB modem and a large C++ application that needs to detect whether that device is present or not. I was hoping to get advice for what the best method to do so would be. The only solution I've thought of is to parse the output of lsusb and look for the vendor and product ID of my device, but that seems a little hack-ish and inefficient. Is there a command or program that I can provide it a vendor/product ID for a USB device and it can tell me whether or not such a device is present in the system? Or another, better way to detect the device than parsing the lsusb output that I've been thinking
View 2 Replies View RelatedI have downloaded the ISO and would happily say Sayanora to my Win xp sp3 if I can clear my doubts. I had installed Mandriva 2009.1 which had trouble in detecting my mobile phone. I forgot what I did but in the end I got it done in the end. 1. Does it need any software etc for detecting my phone? 2.If yes, can I add it to the iso? 3. Is LiLi a good tool to create live usb thumb drive images? 4. Does the system would hang or become slow if I choose KDE (for Amd Athlon 3200+,640mb ddr1 ram, Asus k8sla mb)? 5. If yes, should I install LXDE or just install Openbox and choose the rest of the pakages as I like?
View 1 Replies View RelatedI have a toy Linux box with 256mb RAM running Ubuntu 10.04.1 LTS. Here is the output of free -m:
total used free shared buffers cached
Mem: 245 122 122 0 19 64
-/+ buffers/cache: 38 206
[code]....
I installed the linux(CentOS 5) as a dual boot in my laptop.When i entered in WindowsOS-XP my lan cable is detecting but when i boot in CentOS my lan cable is not detecting ie., i can`t able to connect the internet.Please help me out in this issue as soon as possible.U can reply me to this mail id sandhya.531@gmail.com tooooooooo
View 3 Replies View RelatedI am using Ubuntu 8.04 and when I open up my network settings, It shows my ethernet card and my modem but my wireless card doesn't show up. Under "Hardware Drivers" it says that my driver for my wireless card is a "proprietary driver" and that there is no driver I can get for it for Linux. Is there any way that I can get my wireless card to work? I tried going to the HP website and downloading a driver for it, but all of the drivers only work for Windows....
View 2 Replies View Relatedim dual-booting Ubuntu on my computer with windows 7. When I use windows the internet works fine, however when i switch over to Ubuntu and click on network manager no wireless networks appear.
View 5 Replies View RelatedI am using a linux FC-12 machine which is running on 2.6.36 kernel. I wanted to use the USB data card with that machine. But it is not detecting the device. I found that the modules usbserial, option, qcserial were missing. I installed them using "insmod".After that I have removed and reconnected the device. Still the OS is not detecting the device.After the reboot of the machine, again the modules related to USB are missing.
View 2 Replies View RelatedMy ubuntu was working fine till morning but all of a sudden in the evening , its WICD manager stopped detecting my wlan card , because of this it couldn't detect any wireless network.I formatted and installed the fresh copy, but the problem remains the same.Interesting thing is that the same lan card works fine for Win7 OS.Even earlier in ubuntu it was working fine.I have dual boot machine...
View 9 Replies View RelatedI am working on linux kernel building and customising for our requirement.All these days we were using 2.6.9EL5 kernel to create our own Bootable kernel. Lately we moved to 2.6.33.3 as SATA CDROM support was not available during booting with the earlier kernel.Now with the new kernel i have got all the updates i wanted with respect to hardware detection during booting but having an issue with my PS2 mouse not auto detecting while booting. However i can configure the mouse with the popup that comes during booting by selecting the generic PS2 3 button mouse option. With this my mouse works properly. I am wondering is there a way to make the mouse auto detectable.I have attached one of the Xconfig file that is part of our process.
View 2 Replies View RelatedI am porting the kernel on my hardware board...dmesg shows that...
mmc0: mvsdio driver initialized, lacking card detect (fall back to polling)
mmc0: host does not support reading read-only switch. assuming write-enable.
mmc0: new high speed SDHC card at address aaaa
[code]....
How would I do this? First part of the thread title is because I'm not sure if the install of Debian Squeeze would even detect the Start key. (Btw, is there a small enough sticker of the GNOME logo I could buy and put over the Windows logo? )
I read this thread: [URL] but I'm confused about what linmix is saying. Is there a way to get the power key to do the equivalent of what it would in Windows?
I don't find this an essential task, but it would make life a lot easier.
Edit: I mean Super Key not Power.
I have a asus g50v laptop with a built in webcam and microphone running ubuntu 10.04 32 bit and its not detecting the webcam / microphone
View 12 Replies View Relatedhow to get the card number and device number on system for attched USb audio device?
View 3 Replies View Relatedi have a log like:
Jul 4 23:19:02 Node-1 node-KPI: [INFO] KPI [proc.count = 11 files]
Jul 4 23:22:46 Node-1 node-KPI: [INFO] KPI [proc.count = 27 files]
Jul 4 23:37:49 Node-1 node-KPI: [INFO] KPI [proc.count = 27 files]
Jul 4 23:49:01 Node-1 node-KPI: [INFO] KPI [proc.count = 12 files]
[code]...
I would like to add up the numbers in the last column for each day and get that as the output. It could look like:
Jul 5 : 54
Jul 6 : 38
how can this be done with a bash script?
I need to get the max number from the name of a file
Formant of the file name:
[a-zA-Z]*_[0-9][0-9]_[A-Z][A-Z].log
Delimiter as underscore '_'
[code]....
known part in the above file name will be GA.log A give directory may or may not contain files in the above format or may contain file other then the above format if so then ignore it.
Eg:-
1) Directory=/tmp/log having below listed files
ant_01_EG.log ant_02_GA.log ant_04_EG.log cvs_01_EG.log cvs_02_GA.log cvs_04_EG.log master_01_GA.log master_03_EG.log master_04_GA.log
[code]....
output=> 06
2) Directory=/tmp/log no files
cmd=> ls *[0-9][0-9]_GA.log 2> /dev/null | awk -F_ '{ print $2}' | sort -nr | head -n1 | awk 'BEGIN { if ($1 >0 ) x=0; else x=1 } END {printf "%02.0f
", $1+1}'
output=> 01
if there are no files the output should be 01 and if file(s) found the output should be next highest number+1, In the above example it is 06 My cmd is bit lenghty. reduce my cmd and it should be in one line.