I installed the linux(CentOS 5) as a dual boot in my laptop.When i entered in WindowsOS-XP my lan cable is detecting but when i boot in CentOS my lan cable is not detecting ie., i can`t able to connect the internet.Please help me out in this issue as soon as possible.U can reply me to this mail id sandhya.531@gmail.com tooooooooo
View 3 Replies
I am attempting to get a Dual Monitor Display using aticonfig (and/or manual editing my xorg.conf file). My graphics card (a Radeon HD 4350 with latest ati drivers ) has only a single output but I am using a splitter cable to connect it to two monitors.
I am want one monitor to be 1600x1200 and the second monitor to be 800x600.
This is the command I had tried to no avail.
aticonfig -fq --initial --dtop=horizontal,reverse --resolution=0,1600x1200,1280x1024,1024x768 --mode2=800x600
What am I missing? Should I be using this configuration utility? Or should I be trying to manual edit my xorg.config? All the information I have been able to find seems specific to Dual Head Displays.
EDIT: It occurs to me to post my edited xorg.conf file
Quote:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
[Code].....
I have a computer with grub installed, and nothing else. I'd like to install Debian on it without having to burn a CD. (and I don't have any flash disks.) It has a nice ethernet card, and I have another computer right next to it with an ethernet card. I also have an ethernet cable. However, I don't have any router free which I can mess with for these purposes. As I've looked up, apparently modern Ethernet cards don't need crossover cables, normal cables will work for this type of connection.
I've tried several different "tutorials" on how to set up a netboot server, but
None of them are complete. All of them assume that you understand how DHCP works, and that you can do things like set up a dnsmasq server. I don't understand the DHCP protocol, with submasks and whatnot (I know that it is the protocol for assigning computer network addresses, and that's it), and I don't think I should have to in order to simply connect two computers. All of the tutorials give you incomplete configuration files, and ask you to fill in things which I don't understand, and for me it doesn't make sense to customize these settings, as I just want to connect them and I really don't care what ip address the TFTP server has or whatnot. All of these assume that you are going through a router. I am not. When I try googling for ways to directly connect two linux computers with an ethernet cable, I can't even find instructions, just more references to "you need crossover cables".
So basically, I have two computers directly connected by ethernet cables. Tell me what packages I need to install, what the contents of my configuration files should look like, and what, if any, commands I need to run in order that when I turn on my second computer, and select network boot, it will start up a minimal debian system.
EDIT: Hmmm, it looks like I actually have a linux kernel installed too, but no root filesystem (so no other programs besides busybox).
I can't get a certain harddrive out of its mounting (screws too tight) , but I want it connected to a different computer. Is it possible to have the harddrive's powercable connected to one computer, and its SATA cable connected to another computer's motherboard? (The powercable is too short to connect it to the other computer.)
View 4 Replies View Relatedhow I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:
Three Ethernet Cables
Two Printer Peripheral USB Cables
The Two Computers
A 2GB Flash Drive
That is all I can think of right now. I do not want to use CDs. In a way, I would like to do a network boot. So, how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? I want to put Xubuntu on it, and earse the rest of the Hard Drive. The computers getting this are the iMac G3s and the eMac G4. The eMac has 256MB RAM, 40GB HDD, and a 700MHz processor. Two iMacs have 128MB RAM, 40GB HDD, and a 600MHz Processor. The other iMac is the same as the rest but has a 500MHz processor.
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies View RelatedI cannot boot into the Windows 7 partition, which I guess is /dev/sda1. I have Slackware installed on /dev/sda2 which boots fine, my /etc/lilo.conf looks like
Code:
/etc/# Start LILO global section compact
[code]....
I am working on another's Dell Inspiron 530 with Vista 64-bit; see below:
[code]....
wanting a dual-boot, 500GB hdd was formatted as above, Win Vista x64 Recovery CD was created, and antiX-M11 (as Swift Linux 0_1_1) installed. Now, at startup, machine boots to antiX and not Vista. User wants it the other way around. I think I should have reordered the partitions and not installed GRUB in MBR. EasyBCD is the preferred boot loader for User. This is a learning experience but due to time constraints and not being at my home where references are available, EasyBCD is on a USB stick -- should I boot to the Vista Recovery CD and then try to install EasyBCD to sda3 from it, uninstall antiX (but this will not fix the MBR problem, will it?), or edit fstab or what
I have a PC with three HD's. My primary hard drive has a single partition and contains Win XP SP3. I have a second hard drive which I use to store junk (pictures, movies, etc). The third, 60GB HD, I just put into my PC and I wanted to install Fedora 11 onto it. I want to have a dual boot system with WinXP being the default boot. I downloaded the latest build of Fedora 11, created a LiveCD out of it and I tried to install the OS onto this third new hard drive. I installed the OS, I told it to use the entire third HD and to have a dual boot setup and make the WinXP OS be the default boot. The installation seemed to go without any problems. However, after restarting the PC, the PC stops booting right after the DELL screen. It gives me a cursor and that's it. It just sits there. I have tried redoing the install about 4 different times now and no matter how I change the different installation options, I get the same result. Now I can't even boot into XP even after I disconnect the third drive. I am guessing that the dual boot got screwed up; I just don't know how to fix it and more importantly, how to install Fedora, dual boot.
View 15 Replies View RelatedCan Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedOld Boot drive in new PC (XPPRO + Ubutnu) Run the XP repair BUT still have Error 21, used XP repair console to repair MBR still have problems.
View 1 Replies View RelatedI ended up inheriting an IBM Intellistation Z Pro desktop with Red Hat 2.6.9-78.0.17.EL, that used to be part of a company network (hard IP, domain, etc). I'm trying to boot and connect to my home internet provider.With or without ethernet cable connected, the boot process seems to timeout on a number of steps (system logger, NFS Statd, automount5) and eventually get's stuck in NFS quotas.I started looking at /etc (in single user mode) and of course there are a bunch of files (hosts, resolv.conf, etc) with hard IPs, domains, etc.My questions are:- how hard is to change network setting to use soft IP and be able to connect to my provider
View 3 Replies View RelatedDell XPS 420: Radeon HD 4670: Philips 720p TV monitor. When booting, after the GRUB screen nothing happens until the HDMI cable is unplugged and replugged. Various ATI drivers installed. Various /etc/X11/xorg.conf used.
View 1 Replies View Relatedi use ubuntu 10.10 installed in wubi on my girlfriend's machine.in order to connect to the internet i had to install a dialer script and then i need to type in terminal: sudo cable-start and then password BUT i wish this to happen automatically when booting the machine.i am sure that it is possible, but have no clue how to do it.
View 3 Replies View RelatedI currently have fedora 10 installed and want to set up the hdd to dual boot xp. If anyone could give a guide or suggestion on the best way to do this it would be great. I prefer to not start over even though it would be easier to dual boot linux into an xp host.
View 1 Replies View RelatedHaven't been browsing for long, so this may have been covered already. I'm sure it's a common question but which distro would you prefer for a dual boot on a laptop, running alongside Vista? I've shrunk my Windows partition and opened a 10GB space for new business. I don't know a lot about different distros but boot Ubuntu 10.10 and XP on my desktop. Would this be the best choice?
View 2 Replies View Relatedhow to uninstall linux on dual boot with win XP ??
View 7 Replies View RelatedI am going to install the newest version of Ubuntu on my computer. I am currently running Vista. I would like to be able to dual boot. I understand the whole partitioning deal and booting from the cd but i am worried that doing so will overwrite my Master Boot Record for windows. Do I need to modify the GRUB2 after installation. Read many writeups but was hoping for some input.
View 1 Replies View RelatedNow that ive finally got XP and Ubuntu on my system, i thought id try to get rid of that DOS looking boot! :s
To explain my situation (probably default) when i start up after bios a black screen appears with a list of options:
1. ubuntu
2. ubuntu recovery
3. xp
4. xp recovery
something like that not sure the exact order or titles...
What i wanna do is make it have a GUI where i select which OS i want.
I have one hard disk partitioned into four logical drives.
1.20gb for red hat 5 //installed after installing window xp
2.40gb for Win xp //Installed first
3.40gb not formatted yet
4.more than 50gb for data storage.
After all the installation,I can just boot Red hat 5 but it shows the prompt for window xp also to boot in boot selection screen.When I entered for window to boot,I have this message-
[Code]...
How do I erase windows completely and just run puppy. Also how do I download and install damn small linux.
View 4 Replies View RelatedI have an OSS 11.3/WinXPPro dual boot system. Unfortunately, Windows is a mess because of a botched restoration. I guess I need to start again from scratch. I assume if I attempt to reinstall Windoze that the whole dual boot system is going to get botched up anyway.I would like to know what would be the best approach since I am going to start by installing Windoze to the HD. Here is a readout of what I currently have from gparted:
Partition / File Sys / Mount Point / Flags
/dev/sda1 ntfs /media/sda1
/dev/sda2 extended boot,lba
[code]...
How would I go about dual booting Puppy with Xp?
View 2 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI have Windows 7 on my Dell Xps laptop, and I want to install Ubuntu or Fedora as a dual-boot. Will that cause my system to slow down?
View 2 Replies View RelatedFor about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies View RelatedIt's been a while since I last installed a Linux distro on a machine that already houses another OS. I want to install OpenSuse (11.2) on a spare external drive that I have which will be connected to my PC through USB. The PC however, houses four other drives: one drive that has WinXP installed on it (NTFS) which is my normal boot drive, and three data drives - all NTFS.
Like I said, I want to install OpenSuse on the external drive through a network install. I don't want to end up with a boot menu where I can choose between OpenSuse and XP, I simply want to boot from the XP drive by default and boot from the USB drive when I tell my system to do so (I can call up a boot menu where I can tell my PC from which drive to boot).
Now I have done this many times - albeit too long ago to remember how I did it. I do remember however that last time I tried to do it, it installed a boot menu on my XP boot drive, and I had a hell of a time removing it. What do I need to look out for to prevent this from happening? How do I make sure nothing is changed on the other four drives? (The safest way would be to simply disconnect the other four drives from my system and install OpenSuse on the USB drive of course
In my recent tribulations getting Linux based tools working at work I've gotten a lot of good answers just by searching here. But since this question is very subjective, and details are important, my searches just weren't quite working out.
I've been using Linux off and on since 94, Slackware... a stack of floppies as long as my arm. I say off and on because I've always been of the opinion that Windows had a superior selection of ready-to-run desktop software... I still think that's true, but since I'm pushing open source more at work ($44K a year to use Exchange? Seriously?) I figure it's time to throw in behind it at home, too.
My biggest hangup with a total transition is gaming. I can handle my desktop suite needs just fine with Open/LibreOffice and Seamonkey. The limited work I do with graphics and sound can be handled just as easily with existing open source applications (though I'm not really sure about video playback, yet. Finding good codecs for HD video that work well with Linux based players, WMP and Windows Media Center is kind of a pain in the ass.) Hell, pretty much everything I do on a day to day basis... a drastic improvement over 5 years ago.
The games, on the other hand, are killer. Two of my off and on favorites, World of Warcraft and EVE Online are reportedly well supported by Wine. A good chunk of my game collection, though, was purchased through Steam, which I understand has some issues with Wine. And there's also concerns about future games that get released ... some of which is offset by the constant improvement in Wine and similar packages.
What I'm considering as an option is simply going with Xen for a paravirt Windows guest and running my games in that. What I need to know, though, is how well will that conceivably work? Will a Windows XP or 7 (which one would I want?) guest in a Xen DomU have better gaming support than Wine provides? What other things am I not taking in to consideration that I should? Should I use Xen or whatever the free VMWare is (I'd prefer Xen, open source and all, but it VMWare would really do the job where Xen wouldn't...)?
AMD Phenom X4 955
8GB RAM
SATA 30GB SSD
2TB RAID storage which I would prefer to keep as a single chunk, but meh... it's 2TB.
I have installed CentOS 5.3-5.5, FC 13 and 14. Ubuntu, Debian and., all the major distros and all the hardware is supported by the prebuilt kernels.
Actual uses: MP3 rip/playback. Web browsing. Quicken. Occasional word processing/spreadsheet, media conversion including the dreaded DVD ripping (I buy the DVDs for my kids, but they can't touch them :P), and... hell, whatever it is that we do with our desktops and take for granted. Games. Lots of DirectX games.
Current rig:
Toshiba Satellite L455 laptop
Celeron 2.20 GHz
Windows 7, 64bit
3GB RAM
I downloaded the DVD release of Kubuntu 10.04, from Kubuntu.org. The file is: Kubuntu-10.04-dvd-amd64.rar . I burned it to a DVD, as image, with ImgBurn application. See any problems so far? I want to dual-boot, leaving my Win7 in tact. I am confident that I can handle this with some patient instruction.
What is the procedure to stop dual boot up in your BIOS on Linux?
View 5 Replies View Related
