I installed Lucid Lynx a week ago and I have a problem with the notifications. The notifications that appear on the screen stay for a long time, about 10 seconds. How to control these notifications so that I can reduce the time?
View 1 RepliesI installed Lucid Lynx a week ago and I have a problem with the notifications. The notifications that appear on the screen stay for a long time, about 10 seconds. How to control these notifications so that I can reduce the time?
View 1 Replies View RelatedI have those notifications bubbles that appear right and top of my Screen.
Besides being RIDICULOUSLY big, i don't need them
I don't know if it is the same, but they look like this:
NOTE THIS PICTURE IS JUST AN EXAMPLE I FOUND ON THE INTERNETS - I WANT TO DISABLE ALL NOTIFICATIONS
I have a Compaq Presario R4000 running Ubuntu Linux 9.10 karmic. The system runs very hot and one of the fans is wither never running or always running at the slowest speed. For a while I thought the fan was dead but I just updated the BIOS (Phoenix BIOS) and during the update, that fan suddenly kicked in at full speed! How can I get that fan to spin up during normal usage? I have tried sensors-detect but all it found was k8temp, no fans... (SpeedFan under windows found no fans either)
View 1 Replies View RelatedWhenever I start up my laptop running Fedora 14, I notice that it says that it is failing to connect to my default wireless network since the wireless card is not activated. Since it appears that the wireless card is not activated until the NetworkManager service is started, is there anyway for me to set NetworkManager to start before this check is made? Boot message log is attached. [URL]
View 1 Replies View RelatedI'm running Nagios Core 3.2.3 in a CentOS 5.5 Server, i'm trying to set the notifications, however they don't go through. I'm Using Postfix, i also setup squirrel mail and i can send mails through it successfully, can anyone give me some advice about the logs to check or configurations to check?
View 2 Replies View RelatedHad anyone tried downloading a free SMTP server from the web and use it to send emails in nagios, when the services are down, an email notification will be sent.Right now i need a smtp server in order for me to send email notifications, are there any recommended ones?
View 7 Replies View RelatedHow to write to KDE's OSD or notification from console?
i want to send a notification to the kde4 notification area (in desktop panel) from a small script. Is there a program for? I cant find anything.
I am using Kde 4.5 in Debian and I get some notifications after start that I need to update something. How can I disable it (I often don't want to waste bandwidth for such things)? I am using Debian Wheezy and Kde 4.5
View 1 Replies View RelatedI need a program which generates events when a file is moved, removed or its extended attributes are changed. I'm running Ubuntu Karmic Koala 32-bit desktop.inotify is the standard solution for such problems, but inotify cannot install a recursive watch, so the only option is to the equivalent of find on the filesystem, and add an inotify watch on each node. This is what e.g. inotifywatch does. This won't work for me, because my filesystem has 1 million files, and installing watches to all of them takes forever.
fanotify could work except that I would have to patch the kernel for that (I'm currently running 2.6.31-20), and maintaining patches to the Linux kernel is beyond my time commitment.I used to use rfsdelta (whose kernel module is similar to rlocate), but it just doesn't compile on 2.6.31, because it uses obsolete Linux security framework APIs.
Out of curiosity, how can you control the fan speed?
View 9 Replies View Relatedis there any app that lets me control fan speed?
View 1 Replies View RelatedI want to pick up an obviously unsolved problem. I have a Samsung Q210 Seven Notebook and recently installed Kubuntu. Everything works fine, as long as I put on my sunglasses when working with the notebook in the evening. Triggering the hotkeys shows an icon with a percentage counter that increases or decreases, depending on which function key I use. Although this looks really nifty, it gets boring after utilizing a few times. And, as you might already think, the brightness doesn't change here...
I found a hint telling to adjust the /etc/default/grub: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_backlight=vendor"
The only effect this has is that the nice percentage lowering/raising minigame doesn't work anymore
Also, nothing from the suggestions from the previous post work. This is really bad, since that way not only the user's eyes suffer, but also the energy consumption of the display is maximized.
how I can change brightness/backlight intensity
I just recently did a clean install of 10.10. My controller works fine for games no issues there. I haven't done any sort of configuring in order to make my Logitech cordless rubmble pad 2 controller work as a mouse yet it is. It just started this morning when I booted up. I have found many threads on how to make your controller/joystick work as a mouse. But I have yet to find one on how to get it to quit doing so. Or at least how to toggle it on and off which would be better in my case as Ive found in the past 30 min that I like scrolling with the analog stick much better than pgup/dn or the mouse wheel. The main issue is that I have a 4/yo here that plays games all the time and he keeps opening random things when he plays. I also am looking into how to get virtual box to let windows xp detect my controller but I will post that later after I have done more research if I can't figure it out.
View 1 Replies View RelatedGnome, 10.10 (likely not to upgrade to 11.04), HP-dv7t laptop, intel i7 processor.In my ongoing attempt to create a completely mouseless computing experience (and hopefully, one where I never have to leave the home row) I am currently trying to find a way to control the onscreen cursor with my keyboard.
I have found various solutions, but most of them have problems. The accessibility feature that comes with Ubuntu is (for some reason) not installed on my computer and I can't find the package, but other people who have tried the same thing have said that it is not worth the effort anyway, given that it has nonexistent customization.
This shift-numlock function doesn't work at all. Got info from this thread: ubuntuforums.org/showthread.php?t=926105. Gizmod is incredibly complex and doesn't seem to work all that well with my 64 bit hardware. I worked with it for a few hours. But, anyway, do you have any advice that has not already been posted in the other thread?
I have a USB joypad and I would like to use it to control the mouse on Ubuntu 10.10. Do you know any straightforward way of doing it?
View 2 Replies View RelatedI have been a website designer for sometime now and i was wondering about tring out some of the hardware world. (dont get me wrong im no n00b, i can build a pc from scratch) What is the best way to get started on Controlling Hardware? i mean controling a small electric motor to spin a wheel when a button is pressed on the computer or somthing like that? And can this be done with PHP so i wont have to worry about leaning another programming language? Is it very difficalt? Where should i start?
View 2 Replies View RelatedI've been looking for a way to use my laptop (running Ubuntu) to help service a remote laptop (running Windows XP). I've used TeamViewer and Cisco's VPN Client before, but TeamViewer is Windows only, and I don't want to pay for a Cisco system just to help maintain my friend's computer.
Ideally, I'm looking for something similar to the programs listed above, but I really just want to know if any of you have done this before, and if so, how?
I have done a standard install of Ubuntu 10.4 Desktop. All I have changed is to edit the smb.conf to set the correct workgroup. Everything is working fine, except that I am not able to connect to Ubuntu from my Windows 7 pc using Windows' built-in tool. That should work, shouldn't it? Do I need to edit more settings?
View 3 Replies View RelatedI have 2 distros installed right now and generally keep the main one and install and look at other distros.My question is this; Can I install a second distro and not let it take over my frub/boot menu and NOT let it control the boot menu? If so how would I do it? I always get confused when I install the second distro when it asks what to do,use / or boot as the option etc...
View 9 Replies View RelatedI've just bought a MSI Wind U250 netbook and installed Ubuntu 10.10 64 bit. (Almost everything is working great out of the box. There are some little problems like dead keyboard shortcut Fn + F3 which sould be killing touchpad. BTW any package or other way to configure Fn keys?)This model of netbook has a bluetooth as an option. My netbook hasn't BT, but has bluetooth control light anyway, which isn't used at all. Such a waste, I've paid for this control light after all...
I'm using GNUbiff as an e-mail notifier. It can run a command when a new e-mail comes. Now I'm using this to play a sound: play /usr/share/sounds/purple/receive.wav. But I would like to send this way a signal to the BT control light to light or, even better, start blinking in specified manner. (Scroll Lock control light would be also great)Is there such possibility? Maybe you are aware of existence of a package able to do this, because I'm unable to locate such one.I think this is really obvious adaptation for control light and don't think I'm the first one who want such function. Some laptops even has a special control light just for e-mail (like my 12 years old fujitus-siemens) and there is Polish IM "EKG" (or "EKG2", don't remember) who blinks ScrLk when a new message comes, so I figured out there should be a potentiality to manage control lights.
I have my desktop set up as a SOCKS proxy, and not only me uses it, some friends do too.What I would like to know is how to check every now and again what they are using it for... for example the agreement we have is that they only use it to watch BBC iplayer and 4OD etc while they are abroad. What I dont want is them to pointlessly use it for other browsing.I trust my friends wont, but is there also a way of checking they arent using my connection to download illegal torrents?I guess best case scenrio would be to be able to whitelist only a few sites per user request. Is this possible?
View 1 Replies View RelatedSo, I have an ubuntu box (no keyboard/mouse), connected to a 1920x1080 TV on my wall which is usually used as a media center. Some times I want to do some maintenance work through the GUI so the obvious thing to do is have some kind of remote administration software like VNC. That is generally very laggy and I don't need a full remote administration because I already have a big TV in front of me, I just need to use my laptop's mouse and keyboard to control the linux box.
View 2 Replies View RelatedI'm looking into upgrading my laptop from 9.10 to 10.04, but before I do I wanted to find out if I can limit the number of packages the system must install for this purpose. I began the process to upgrade, and the wizard informed me that on top of package upgrades, 288 packages needed to be downloaded, for a total well over 1GB of downloading. While my internet connection can support this, I don't feel the need to install 288 packages, most of which I'm certain I will not be using, nor will most of these be dependencies for things I do use.
In short: can I pick and choose what gets downloaded and installed in the upgrade? I've asked this question before, and somebody said the answer was 'yes', however I see nowhere to control this. No buttons, no config files.
Running 10.04 LTS, wondering if there was a way to control fan speed using the open source radeon driver with a HD5770, it's currently far too loud even when not really being in use.
View 3 Replies View RelatedAfter implementing a new protocol on ns2 , I need now to integrate infomation about nodes energy .So I am going to implement a new c++ code to define the model of energy consumption in every node .have you any exemples to help me getting started .
View 2 Replies View RelatedI am running Ubuntu 9.10 Karmic Koala, and I am having problems with GDB. When I attempt to debug a C program in kdbg or codeblocks, the output terminal will display this message: "warning: GDB: Failed to set controlling terminal: Operation not permitted" I have searched quite a bit and I have not found a fix that works.
I am running the latest stable versions of all my software supplied by the ubuntu repositories My system meets all the dependencies for KDBG and Codeblocks
I am running gnome, but the KDE files installed by Synaptic are version 3.5.10
I have KDBG version 2.1.1
I have GDB version 7.0-0ubuntu1
I have CodeBlocks 8.02-0ubuntu4
If anybody needs any more information in order to give ideas or knowledge on how to fix this just let me know
I've been building a large multi-touch display like this: [URL].._computer and was wondering what software I could use to control my desktop with this, or if it is possible.
View 2 Replies View RelatedI use Apache 2.0.55 (Ubuntu) as a document server for a business association. When the document files expire, I change the permissions so that only the owner can open them but I like to leave them on the server so that they are all in one place.
Here is my trouble--when visitors come to the site and get the directory listing, all the document files show up, whether the visitor can access them or not.
Is there some way to configure the server to not show the inaccessible files?
I guess a few technical details might help. During their useful lives, the files permissions are set to 644. Once they expire, I change them to 600. After the change, the files are still visible. Setting them to 000 doesn't help either.
It might be of note, but directories behave differently than files. If I set a directory to 600, it disappears from the listing.
I want a media player that I can control from the command line. Ideally I would like it to have a GUI option, but I need to be able to run a command to "pause it", "play the next track in the playlist" etc. The player will be playing some media, then from another terminal I want to control the current instance. What are my options? I'd prefer it not to be an mpd client if possible.
View 11 Replies View Related