General :: Control Console Session Keyboard Over Ssh?
Aug 13, 2011
I have a logitech wireless keyboard/mouse, but just lost the tiny usb wireless receiver.
I want to use my laptop as the keyboard for the other machine (Ubuntu 10.10) until I replace the keyboard and mouse.
Is it possible to control the console session's keyboard over ssh? I only want keyboard control, I don't want to use something like VNC because the video is too slow.
EDIT: I'd like to be clear that I want to be able to control gui applications running on the console session, so something like unix screen won't
View 3 Replies
ADVERTISEMENT
Jul 11, 2011
I'd like to remotely administer my Linux machine at home whilst I'm at work. Only ports 80 and 443 are avaiable, through an HTTP proxy. I don't want to install tunnelling software.What I really need is something that'll run on my server and display a console inside a web browser.
View 3 Replies
View Related
Mar 2, 2011
I have logged as e.g. user1 via ssh into my machine. Then I perform `su -` to switch to root user and I don't see debug messages which are normally displayed when I log as root via system console.How to display console messages in ssh session ?
View 1 Replies
View Related
Dec 6, 2010
I want to control Network manager from the command-line. This worked well enough in Ubuntu 10.04 (with cnetworkmanager, nmcli is another possible choice). Since the upgrade to Ubuntu 10.10 however, a D-Bus exception is raised when I attempt to activate a connection from within a SSH terminal:
org.freedesktop.NetworkManager.PermissionDenied:
Not authorized to control networking.
It may have to do with /etc/dbus-1/system.d/NetworkManager.conf; This issue occurs only when I am ssh'd into the machine; in a gnome session I don't get the same issue -- with the same (admin) user account in both cases.
View 1 Replies
View Related
May 5, 2011
I have seen this question, but it's answers are not good enough for me, because I do not have a window manager on my system.
Is there a console tool that can hide windows?
I am using xwininfo to get information about the window. It gives window id, and some additional stuff. This id should be enough to do any operation with the window.
View 1 Replies
View Related
Jul 8, 2010
I'm guessing the answer to my question is in manipulating the kernel command line. But with what arguments? (and does the kernel have it's own fonts to be used on a FB device?)
The host is a ARM9 based embedded system with a 1-bit LCD screen.
This is a prelude question to: Naming a Frame buffer Device
View 1 Replies
View Related
Oct 6, 2010
Like in xte "str ў", but with support of all characters.
View 1 Replies
View Related
Aug 24, 2011
I have a Linux system running (Debian). It is working perfectly from a remote point of view. I can ssh in it, it has the imap running correctly, and a couple of kvm systems running (I can also ssh to them). Well, it works!
But when I go in front of the keyboard/mouse/screen there's nothing. No way to switch between the consoles with Ctrl+Alt+F# (X is not running on this system). The screen is desperately black. But the screen does not go to sleep mode, it still has its green led on! I guess it means that the graphics card still sends the H and V syncs correctly (VGA connection).
Is there a process that is blocking the display and prevents me from getting the control?
Note: Last time I used the console, it was in console 1. Ctrl+Alt+F1.
View 3 Replies
View Related
Jan 24, 2011
I don't care if this is done in the bios or a kernel module or software. Is there any way at all to do make the 'fn' key act as 'control' and the 'control' key act as 'fn' in linux running on a macbook pro?
PS. You can do this with software in OSX with the application KeyRemap4MacBook.
View 1 Replies
View Related
Aug 29, 2011
I have RDP working fine on my machine, however when I am signed in locally to the machine, I get the "console" session, which is fine, but when I want to RDP from another machine, I am put into a separate session, instead of "taking over" the console session.Is there a way to do this, similar to how RDP works on a windows machine?I have tried running the mstsc /console command, but I still get stuck into a non-console session.
View 1 Replies
View Related
Oct 29, 2009
Volume up, volume down and mute keys on the keyboard don't control the volume any longer.They worked before. Hitting the keys brings up a progress bar widget with the volume level unchangeable, set at 0% (which is not accurate at all).It looks like the key mappings or key bindings are working, but there is a disconnect with actual functionality. The volume cannot be changed or muted anymore from the keyboard.
This worked just fine in KDE on Fedora 11 before upgrading KDE components yesterday with Yumex. I am now using KDE 4.3.2 I don't think that it's a coincidence that it stopped working after doing an update.
I updated the kernel and nVidia drivers too, but this problem exists when I went back and tested with the previous kernel, so I don't suspect the kernel upgrade. No info in Xorg.conf about the keyboard. Is there a setting that I am missing?
Sound works just fine. I can listen to whatever source I like. This is not a problem with the sound drivers as far as I can tell.I just want to be able to control the volume with the keys on my Logitech Illuminated Keyboard, model Y-UY95. Is anyone else experiencing this?I can adjust the volume with Kmix 3.5 or GNOME Volume Control V2.1
View 7 Replies
View Related
Oct 27, 2010
Is any way to detect a keypress event in a console session? Preferebly without needing the application to be running in the foreground
View 2 Replies
View Related
Jun 16, 2009
My hard drive's file system has become totally mucked up. I had a few partitions on it, 0 is XP, 1 is vista, 2 is Debian, and 3 is the data. I know that it's this hard drive because when I disconnect it, any liveCD runs ok. After failing to boot puppy linux (liveCD), xp (bootmgr not found), debian (ended in kernal panic), I tried GPARTED. The xp and vista partitions are listed as existing, but they show a problem flag, gparted says they are corrupt, and they are not listed as having a start, end, or any data. However, the main data partition does list a start, end, size, and data space used.
I need to either format those or get into something that will let me access the data partition. Gparted either hangs on boot or doesn't recognise the mouse so I can't reformat the bad partitions. Are there any programs that will ignore the bad partitions and let me access the good ones? Any time I go into a linux distro it either ends up in kernel panic or the mouse doesn't respond. It's hard to explain. With GPARTED, sometimes it hangs at the third line, sometimes it fails at "mounting hard drives", and sometimes it makes it to the GUI but I can't use the mouse. Debian alternates between these as well.
If I keep trying it looks like I can boot, and it will recognise the partitions, but I can't use the mouse. I'm kind of familar with bash, is there a way to start up the terminal with no gui? If I could get a terminal up with a hotkey in the GUI or just start up from a terminal (no gui), I could type mv dev/sda3/ or whatnot. If I could get into a terminal of gparted I could format the bad parts of the drive to see if that would work. Otherwise it looks like I'm going to have to zero out the drive with the WD diag tool. The data isn't life or death, but it would save me some time.
View 3 Replies
View Related
Jun 4, 2011
I have a question regarding runlevels, shutdown procedure and KDM. I am on a freshly installed Slackware64 13.37 multilib system. The default runlevel in /etc/inittab is set to 3: multiuser w/o X.
Now, I log in as root and issue the command:
Code:
As expected, KDM starts up, and I log in to KDE (or another WM/DE) as a normal users. When I am finished, I either issues
Code:
In Konsole or click on Shutdown in the KDE menu. The shutdown process is initiated, as expected, but then it stops, and a window alerts me, that there is a session open by user 'root'. If I click OK, the machine is finally shut down.
Now, if I interpret this correctly, the behaviour of Slackware64 13.37 has changed here, compared to 13.1. In previous versions, the root seesion was closed, when I changed the runlevel to 4 with the telinit command. Now, the session remains open, obviously.
My question is: Is this the correct behaviour, and isn't this a security whole? An unnoticed (!) open root session while I am surfing the web as an unprivileged user in KDE could be dangerous, I think...
Is it misconfiguration in my system, or is this the way it should be?
View 2 Replies
View Related
Nov 25, 2010
I want to control Network manager from the command-line. This worked well enough in Ubuntu 10.04 (with cnetworkmanager, nmcli is another possible choice). Since the upgrade to Ubuntu 10.10 however, a DBus exception is raised when I attempt to activate a connection from within a SSH terminal:
Code:
org.freedesktop.NetworkManager.PermissionDenied: Not authorized to control networking.
View 9 Replies
View Related
Dec 31, 2010
I have a slack 64 13.1 box, that I want to be able to control the monitor of from my laptop. Here's the scenario: I can already control the music remotely via X forwarding banshee to my laptop (banshee shows up on the laptop and music comes out on the desktop). Now I want to be able to open a movie on the desktop's display via the laptop.
Now googling this comes up with solutions for X forwarding, but I don't want it to forward X I want it to display on the desktop.
View 3 Replies
View Related
Dec 30, 2009
I have several local users on a F11 box. I want to keep one of those users from getting to the network. I could upgrade this machine to F12, if it offers a better solution.
View 1 Replies
View Related
Aug 29, 2009
How do you configure FC11 to grant full control to the tigerVNC session. I cannot do any software updates, update vsftp through the GUI and add different software.
There are probably more things.
I can do this from the local console but I want to run two systems headless and use my three monitors on a single system that I manage them from.
View 1 Replies
View Related
Feb 4, 2010
after an upgrade i got an american keyboard-layout in the login-terminal. i ran dpkg-reconfigure console-data: its said keyboard layout would be german. i ran dpkg-reconfigure keyboard-layout: same thing. i checked the bugs for console-data and keyboard-layout: [URL] and the best i could find is this (console unusable after upgrade): [URL] but it doesnt seem to be exactly the same problem. its since about a week.main problem is the password, else its a little annoyance, not more.
View 4 Replies
View Related
Jul 13, 2010
I have console only on my machine and I have two problems with it:
1) I can't find how to enable programmer dvorak keyboard layout.
2) All the console settings don't stay after reboot, I have to do dpkg-reconfigure console-setup again. But after I do that I loose russian layout that I normally can switch to with Alt+Shift.
View 6 Replies
View Related
Jul 26, 2011
I tried to use NDN [URL] which is fork of famous DN . It's more advanced then Midnight Commander and I would like to use it to better understand Debian FS and do console works there. However, I have a problem and it seems that their support forum does not work, so I thought to ask for general help here, in case it's something that can be set in Debian. Problem is that when I run this manager I can't use arrow keys or 'num pad' or PgUp/PgDn/.... pad but only 'central part' of keyboard - regular keys and Fx buttons. So I was wondering if there could be some problem between terminal emulation and this application that can cause such behaviour which is unacceptable for normal usage, obviously.
View 13 Replies
View Related
Feb 7, 2010
I am logging into an Ubuntu 8.04 machine using ssh, so I use a console. The keyboard layout is US-standard, obvioulsy. However, I would like to use french-canadian keyboard layout. And I don't know at all how to switch it in console. Give me Gnome or KDE, and we're done. But this is console only. I guess it has to do with the loadkeys command. Ok. I retrieved from the web a file cf.map.gz. Maybe ubuntu requires a different kind of file? Using "locate cf.map" I get nothing, except the file I have downloaded. Any package I should demand to be installed? (if yes, what do I do once they are in?) I tried using both the .gz and uncompressed files.
Code:
loadkeys cf.map.gz
Couldnt get a file descriptor referring to the console
Code:
loadkeys -u cf.map.gz
Couldnt get a file descriptor referring to the console
Loading cf.map.gz
[code]....
They tell us about some program, console-data, using root privileges. Intriguing, but I am only a user, and do not have any root privileges. The system admin. has never used another keyboard layout, and knows even less than I on this matter. I tried similar stuff on my openSUSE at home, on a newly created experimental account, and I am equally unable to change within the console the keyboard layout (similar error messages).
View 2 Replies
View Related
Feb 14, 2010
I need to change my keyboard layout from Arabic to USA. I cannot login to my machine, however I can access its files via a live session.
Is there a text file I can edit that will change my keyboard layout.
I am running Ubuntu 8.10 with a Gnome desktop.
I have tried editing /etc/X11/xorg.conf and this did not work.
View 3 Replies
View Related
Jan 3, 2011
how can i control vlc via the keys above my keyboard(my english sucks and i have no idea what they are called, meta keys? multimedia keys? whatever)only MPlayer responds to them, not vlci opened vlc preferences window and in hotkeys page, i wanted to add the "PLAY KEY" to "PLAY/PAUSE" but it wouldn't even recognize the keys, nothing happens when i press them, but it would recognize something else ,like
View 2 Replies
View Related
Apr 9, 2010
I know there are many threads regarding this topic.I probably read most of them. At installation time I told Debian to use German keyboard layout (since I am from Germany). Now I want to switch it to American keyboard layout. In X this was no problem. But in the tty consoles I cant get it changed. It does not matter to me if it is system wide or user wide because I am the only user. (system wide would be a little bit more preferrable because it would affect the super user too, I think).I tried dpkg-reconfigure console-data
and selecting my desired layout. This changes the Layout to American until reboot
View 2 Replies
View Related
Sep 8, 2011
I just installed Debian 6 and need to change the console keyboard layout (I am not running any sort of gui).I installed 'console-data' and ran:# dpkg-reconfigure console-dataThis assigns my Apple keyboard keys perfectly but it won't survive a reboot, which is really important for entering passwords
View 2 Replies
View Related
May 15, 2011
If I switch using CTRL-ALT-F1 to the console, then I have other keyboard layout than under Gnome Desktop. Howto change console keyboard layout?
View 5 Replies
View Related
Nov 23, 2010
I use Slackware 13.1. So far I chose during the installation of the system lat2a-16.psfu.gz font and my applications worked well in console mode. Now the same applications with the same font display gridded rectangles instead of some diacritical characters. In /etc/rc.d/rc.font I have standard setfont -v lat2a-16.psfu.gz command:
/etc/rc.d/rc.font:
Code:
setfont -v lat2a-16.psfu.gz
In /etc/rc.d/rc.keymap I have standard loadkeys pl2.map command:
/etc/rc.d/rc.keymap:
Code:
if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys pl2.map; fi
Standard setfont -v lat2a-16.psfu.gz command reports for some reason loading of the Unicode mapping table:
# setfont -v lat2a-16.psfu.gz
Code:
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2a-16.psfu.gz
Loading Unicode mapping table...
[code]....
I examined /etc/rc.d directory but I didn�t find the setting switching the console to the Unicode mode. The same with env and set commands outputs. I tried to overwrite Slackware 13.1 /usr/share/kbd/consolefonts/lat2a-16.psfu.gz with lat2a-16.psfu.gz file provided in kbd packages from Slackware 12.2 and 11.0 but the results were the same. I suppose the problem is caused by improper handling of the system settings by the kernel but I�m not sure.how can I get rid of Unicode console font and keyboard layout and come back to ISO-8859-2 font and keyboard?
View 6 Replies
View Related
Oct 23, 2010
good programme that the volume control on the keyboard can work on the master control?
View 1 Replies
View Related
Nov 10, 2010
Machine: 2008 Mac ProKeyboard: Aluminum/wired/numeric keypad/US layoutKernel: 2.6.35-22-generic x64 (maverick)Bootloader: GRUB 1.99 BetaI have been trying to EFI boot Ubuntu since June - without success. My goal, for now, is to boot into an initramfs environment succesfully. I'm booting with these grub commands:
insmod efi_uga
linux (hd1,gpt1)/ubuntu/vmlinuz-2.6.35-22-generic video=efifb noefi
initrd (hd1,gpt1)/ubuntu/initramfs-2.6.35-22-generic
[code]....
View 5 Replies
View Related
