I have console only on my machine and I have two problems with it:
1) I can't find how to enable programmer dvorak keyboard layout.
2) All the console settings don't stay after reboot, I have to do dpkg-reconfigure console-setup again. But after I do that I loose russian layout that I normally can switch to with Alt+Shift.
I know there are many threads regarding this topic.I probably read most of them. At installation time I told Debian to use German keyboard layout (since I am from Germany). Now I want to switch it to American keyboard layout. In X this was no problem. But in the tty consoles I cant get it changed. It does not matter to me if it is system wide or user wide because I am the only user. (system wide would be a little bit more preferrable because it would affect the super user too, I think).I tried dpkg-reconfigure console-data
and selecting my desired layout. This changes the Layout to American until reboot
I just installed Debian 6 and need to change the console keyboard layout (I am not running any sort of gui).I installed 'console-data' and ran:# dpkg-reconfigure console-dataThis assigns my Apple keyboard keys perfectly but it won't survive a reboot, which is really important for entering passwords
View 2 Replies View RelatedI'm getting a weird charset problem in a chroot'ed system that I kexec'ed into. It is especially noticeable in ncurses programs like aptitude, but it also noticeable in vim. [URL] My locales are configured to en_US.UTF-8, I have choosen my keyboard layout with kbd-config while in the chroot before kexec'ing into it, I've passed the bootkbd= parameter to the kexec'ed kernel, and my TERM variable is set to "linux". I can't try xterm because this chroot system doesn't has X.
EDIT: I just noticed that the keyboard layout I selected is not working properly. All keys work fine except the ones that are specific to my country. Instead of ç I get a weird symbol.
I am logging into an Ubuntu 8.04 machine using ssh, so I use a console. The keyboard layout is US-standard, obvioulsy. However, I would like to use french-canadian keyboard layout. And I don't know at all how to switch it in console. Give me Gnome or KDE, and we're done. But this is console only. I guess it has to do with the loadkeys command. Ok. I retrieved from the web a file cf.map.gz. Maybe ubuntu requires a different kind of file? Using "locate cf.map" I get nothing, except the file I have downloaded. Any package I should demand to be installed? (if yes, what do I do once they are in?) I tried using both the .gz and uncompressed files.
Code:
loadkeys cf.map.gz
Couldnt get a file descriptor referring to the console
Code:
loadkeys -u cf.map.gz
Couldnt get a file descriptor referring to the console
Loading cf.map.gz
[code]....
They tell us about some program, console-data, using root privileges. Intriguing, but I am only a user, and do not have any root privileges. The system admin. has never used another keyboard layout, and knows even less than I on this matter. I tried similar stuff on my openSUSE at home, on a newly created experimental account, and I am equally unable to change within the console the keyboard layout (similar error messages).
If I switch using CTRL-ALT-F1 to the console, then I have other keyboard layout than under Gnome Desktop. Howto change console keyboard layout?
View 5 Replies View RelatedI use Slackware 13.1. So far I chose during the installation of the system lat2a-16.psfu.gz font and my applications worked well in console mode. Now the same applications with the same font display gridded rectangles instead of some diacritical characters. In /etc/rc.d/rc.font I have standard setfont -v lat2a-16.psfu.gz command:
/etc/rc.d/rc.font:
Code:
setfont -v lat2a-16.psfu.gz
In /etc/rc.d/rc.keymap I have standard loadkeys pl2.map command:
/etc/rc.d/rc.keymap:
Code:
if [ -x /usr/bin/loadkeys ]; then /usr/bin/loadkeys pl2.map; fi
Standard setfont -v lat2a-16.psfu.gz command reports for some reason loading of the Unicode mapping table:
# setfont -v lat2a-16.psfu.gz
Code:
Loading 256-char 8x16 font from file /usr/share/kbd/consolefonts/lat2a-16.psfu.gz
Loading Unicode mapping table...
[code]....
I examined /etc/rc.d directory but I didn�t find the setting switching the console to the Unicode mode. The same with env and set commands outputs. I tried to overwrite Slackware 13.1 /usr/share/kbd/consolefonts/lat2a-16.psfu.gz with lat2a-16.psfu.gz file provided in kbd packages from Slackware 12.2 and 11.0 but the results were the same. I suppose the problem is caused by improper handling of the system settings by the kernel but I�m not sure.how can I get rid of Unicode console font and keyboard layout and come back to ISO-8859-2 font and keyboard?
how can I set the keyboard layout used by Debian to enter the password of my encrypted filesystem?
After my recent "aptitude upgrade", I have not been able to mount my encrypted filesystem anymore. I have discovered that the keyboard layout used to enter the password has changed. Problem is that with such layout I can't enter some of the characters composing the password. The encrypted filesystem looks intact, since I have been able to mount it and backup my files by means of a live CD. That means that I can edit any system file, if needed.
Every technique I have found to change layout cannot be employed in this case, since they rely on the system being up and running. I've tried editing /etc/default/keyboard, but that does not work.
When I installed Ubuntu on my laptop I selected English US (dead keys) as my keyboard layout, but a couple of days ago I decided to change it to English US (dead keys ALTGR) so I just went to the keyboard settings and added the layout, then deleted the old one "English US (dead keys)", logged out and selected the new one "English US (dead keys ALTGR)", logged back in and then restarted, and now I can't boot into Ubuntu, all I get is Grub but when I enter to Ubuntu I get a black screen and the Caps Lock light blinking.
View 5 Replies View RelatedRunning Ubuntu Lucid Lynx, GNOME 2.3Keyboard Preferences utilityAdding any Spanish language keyboard layout makes my Alt_R not work in ANY layout! I see that it changes Alt_R to "Iso_L..." for all/both layouts, including USA layout. When I click "Reset to Defaults" it's fine again, USA layout shows Alt_R again. I've tried all the variants of the Latin American layout and the Spain layout and they all do the same thing.What is "ISO_L..." and what's going on?i DESPERATELY need my Alt_R to work!
View 2 Replies View RelatedI have installed opensuse 11.3 a couple of weeks ago in 2 computers and both suffer of the same problem.In my asus laptop, i have a german keyboard. It is correctly recogniced as german keyboard by ev-dev, i guess. (ev-dev managed). But i need to write some spanisch symbols too, like accents (ᠩ ? hich in a normal linux, they do work. For some reason, after rebooting, or after some time of having it running, the keyboard layout resets to an invalid setup, here accents get not over the letter (?a ?e ?i ?o ?u), so i have to select my layout again in the gnome control center.
With my other computermore or less the same.Its a desktop PC with an spanisch keyboard. But i thinck i picked German keyboard during installation and now it starts always with german with some sort of 5 secs delay when setting it. I have to pick spanisch and i always delete the german layout, but after some time having it running, it resets to the previusly deleted german layout.
having problems with my keyboard layout since upgrade from F11 to F12. When I reboot and login into gnome I have to switch back to my layout as it has been set to USA default layout.
View 3 Replies View Relatedwhen I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
View 12 Replies View RelatedI tried to install Debian on my MyBook Live NAS following this [URL] ..... I was as happy as a sandboy when the SSH login finally was reachable after the process which went through without any errors or problems. But thats not the end - my password is not accepted and so i can't login.
In more technical terms here's my question: I chrooted into a newly debootstrapped system and changed the password using simple 'passwd'. Having done that on another machine i could find out that there are no locales/keyboard settings applied. My guess is that in this case the default US(?) settings and the keyboard layout are used.
Not aware of any issue here i entered a password containing special characters like " and ! and @. After investigating further I found out that in the chroot environment my keyboard layout from the host is used, which is bad because i do not know what environment was set in the originally MyBook system. All the action was done via SSH using kitty.
Disassembly would be the last exit which i would like to avoid. What keyboard layouts are used in chroot without locales set AND which one is used in the openssh login prompt? Is there a way to enter the password in a <ALT> + x format?
I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all <variant>
<configItem>
<name>accentsFR</name>
<description>English (UK with french accents)</description>
</configItem>
</variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
When I installed Debuntu i picked US as my country, and now when i try to change region/language/keyboard-layout to norwegian, Debuntu only suggests english. How can i install the Norwegian language pack to debuntu?
View 2 Replies View RelatedI've Lenny and I've created a customized LIVE USB image with Swiss German keyboard layout using these commands:# lh config -b usb-hdd --bootappend-live "locales=de_CH.UTF-8 keyboard-layouts=ch" --packages-list xfce
# lh_build An binary.img was successfully created, but if I boot from this image, then I still have default US keyboard under xfce.
What is the general way to switch the keyboard layout?
What works for me currently is the custom Section in /etc/X11/xorg.conf.d/kbd.conf.
However this section must include Option "Device" "/dev/input/by-path/..." which identifies the current keyboard. This works fine for my laptop keyboard.
However when I attach USB keyboard, keyboard switching does not work.
I also found somewhere it should be done via /etc/default/keyboard, but that does not work for me at all.
i've just built my own debian distro with simple-cdd, based on the latest release of lenny. everything is working fine, except for:
first, i couldn't set a default keyboard layout up in preseed file. i tried all these settings below, but none of them worked:
console-data console-data/keymap/qwerty/layout select US american
console-data console-data/keymap/family select qwerty
console-common console-data/keymap/family select qwerty
[Code].....
I use czech QWERTZ keyboard layout, but sometimes it accidentaly switches to (probably) english or US qwerty, so I am unable to write our national characters (which share the keys with numbers on laptop), it writes Y instead of Z etc.
So I am unable to write normal text. I looked in keyboard settings, but it seems to be ok:
layout is "česko with <|> key" - HP Pavilion ZT11xx - this seems to be OK and it worked without problems before this accidental switch.
there is no other layout than the mentioned one and in Layout settings (hope this is correct as I have this in Czech) I unchecked all boxes in Layout switching.
I absolutely have no idea where is the problem. Maybe it is some keybinding but did not find anything which could do this.
I use Debian Lenny with added a11y apps like Orca etc. called Vinux. I tried to ask there, but currently wihout success.
The whole thread is here: [url]
I installed Gnome 3 Classic but I can't change my input source.in Gnome 3 I can but in Classic version I can't. In Gnome 3 I can see it beside the Clock but In Gnome 3 Classic it doesn't exist. How can I enable it?
View 0 Replies View RelatedHow can I enable "Keyboard layout indicator" in Gnome 3 Classic?
View 0 Replies View Relatedafter an upgrade i got an american keyboard-layout in the login-terminal. i ran dpkg-reconfigure console-data: its said keyboard layout would be german. i ran dpkg-reconfigure keyboard-layout: same thing. i checked the bugs for console-data and keyboard-layout: [URL] and the best i could find is this (console unusable after upgrade): [URL] but it doesnt seem to be exactly the same problem. its since about a week.main problem is the password, else its a little annoyance, not more.
View 4 Replies View RelatedI'm guessing the answer to my question is in manipulating the kernel command line. But with what arguments? (and does the kernel have it's own fonts to be used on a FB device?)
The host is a ARM9 based embedded system with a 1-bit LCD screen.
This is a prelude question to: Naming a Frame buffer Device
I defined a variant to my keyboard layout (Italian) editing the file/usr/share/X11/xkb/symbols/it and adding this block:
Code:
partial alphanumeric_keys
xkb_symbols "itaro" {
[code]....
I tried to use NDN [URL] which is fork of famous DN . It's more advanced then Midnight Commander and I would like to use it to better understand Debian FS and do console works there. However, I have a problem and it seems that their support forum does not work, so I thought to ask for general help here, in case it's something that can be set in Debian. Problem is that when I run this manager I can't use arrow keys or 'num pad' or PgUp/PgDn/.... pad but only 'central part' of keyboard - regular keys and Fx buttons. So I was wondering if there could be some problem between terminal emulation and this application that can cause such behaviour which is unacceptable for normal usage, obviously.
View 13 Replies View RelatedI'm a used Ubuntu user on a pc, and I like the french keyboard layout because it allows me to type accentued characters easily.I found a win-fr keyboard layout but it's much like windows and not so good.I found xmodmap.fr keyboard layout and I'd like to know if it was possible use it with my Mac SL 10.6.5, maybe I could do xmodmap xmodmap.fr or a way to convert to mac layout file.
View 1 Replies View RelatedRecently i have bought a Dell Inspiron n5010 laptop and installed ubuntu 10.10. I have a windows 7 installed as well. In windows Us English Table for IBM Arabic 238_L keyboard layout works for my pc. But, i can not find this layout in my ubuntu.
View 2 Replies View RelatedI installed Ubuntu 11.04.
how to set the keyboard layout.
I keep using the rescue cd because whenever I choose a keyboard layout the system does not seem to keep it like that.
After rebooting it loads another layout and I can't find which keys to type in that unknown layout. So for the moment, my password is 'tt' because I know it will work in both layout.
I have a belgium azerty keyboard. For the moment the upper option in the keyboard layout screen is USA and the lower option is Belgium. Which is weird since I thought that the upper option was of higher priority. But at least it works like that. At least until I reboot I think
PS: the rescue cd has also a keyboard layout problem. I chose belgium and I end up with a usa layout.
I have an issue with Fedora 12, everytime I change the Layout of the Keyboard in: Preference/hardware/keyboard and logout It goes back to default.
If I remove USA and add french canada, when I logout and login it goes back to usa & fren canada legacy.
I tried just to remove usa but it comeback everytimes.
