General :: Change The Screen Resolution Of Puppy Running With Virtual Box?
Jun 18, 2010
I am running Puppy from a usb in Windows 7 using Virtual Box and I can't get the 1280 x 800 screen resolution to work. The probe doesn't recognize my monitor initially in the video setup. When I choose this screen resolution in the xorgwizard it ignores the resolution I select and uses 1600 x 1200. If I try to reduce the resolution in the resolution changer, it decreases the window size but the desktop stays at the same resolution effectively cutting off the majority of the desktop from view. I have been trying the intel, radeon, vesa, and vmware drivers but none of them seem to work. Do I need to install a special video driver? I am using a unibody macbook.
View 3 Replies
ADVERTISEMENT
Aug 29, 2010
I have an Ubuntu server with no physical access to it, only via ssh/vnc.
It is stuck on a 1680x1050 resolution and in the system display settings the menus are disabled since there is no detected real display connected.
I need to lower the resolution to e.g. 800x600. code...
View 3 Replies
View Related
Jun 7, 2011
I am running Windows 7 inside Virtual Machine Manager - running on Cent OS 5.6. My problem is that the Windows 7 'Window', is only about half the size of the screen. Is there any to change the resolution of the OS running inside Virtual Machine Manager?
View 6 Replies
View Related
Oct 3, 2010
This is my first posting as a Linux Newbie. I have installed Ubuntu 10.04 inside of a MS Virtual PC on my Vista machine. Everything seems to work beautifully and is stable. However, I would like to use a resolution higher than the current maximum of 800x600. I've poked around on the web and have tried various tips. I tried using the xrandr options which added a higher resolution mode, but when I would try to set the output to that resolution, I would get an error message to the effect that I could not exceed the current maximum of 800x600.
I tried to cobble parameter values together and create an xorg.conf file, but every iteration seems to produce a bunch of colorful vertical bars within my Virtual PC window, and I would have to blow away that virtual PC setup and rebuild it (along with reinstalling Ubuntu). As I said, 800x600 is not a show stopper, but I would like to take advantage of the real estate I have with my display. These "fifty-five year old" eyes could benefit from the larger size. FYI, I did take a stab at installing Virtual Box, but got the infamous "blue screen", so I would rather stick with what appears to be a stable virtual PC base.
View 4 Replies
View Related
Sep 16, 2010
I am running 'Slitaz.3' but don't have a clue how i may change the screen resolution.
View 1 Replies
View Related
Jan 21, 2011
I have a mecer bravo laptop which has a sis mirage graphics card, I cant change the screen resolution from 800 x 600 to anything better.
View 4 Replies
View Related
Nov 10, 2010
I need to know how to change resolution on the screen and monitor
View 5 Replies
View Related
Jan 17, 2011
I can't change scrren resolution in ubuntu linux.It's having only one size.which file i need to edit.
View 14 Replies
View Related
Aug 2, 2010
I just installed Simply Mepis 8.0.15 for a friend but the screen resolution is 800 x 600, how do I change that to 1024 x 768?
View 9 Replies
View Related
May 8, 2011
I just installed Opensuse 11.4 (gnome) in a new desktop but the screen resolution is 1360x768 60hz and this is not listed in monitor settings, so the monitor keeps displaying "not optimized mode" message. In order to use the correct resolution, I used these two commands:xrandr --newmode "1360x768_60.00" 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsyncxrandr --addmode VGA1 "1360x768_60.00"it worked, but every time the computer is restarted, I must run this command again. So I think "I just have to create a script in the initialization!". It works, every time the computer is started, there is no need to run the commands again. But when program enters in full screen, the resolution is "lost" and the monitor message is displayed again.
View 7 Replies
View Related
Mar 8, 2010
I am unable to change mu screen resolution in slackware 12.2. I am editing the xorg.conf in "etc/X11/" with nano. My graphics card is a ATI with 64MB RAM. My monitor is capable of 1280x1024 @ 60Hz. Heres the xorg.conf:
Code:
# File generated by xf86config.
# Copyright (c) 1999 by The XFree86 Project, Inc.
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions: .....
View 2 Replies
View Related
Jul 10, 2011
I have been using VirtualBox for really long time, and personally I like it a lot, specially the screen resolution auto change to fit the window size. Lately I have moved to qemu/kvm for the sole reason to learn kvm, I have been missing different things from VirtualBox, but Am trying to stuck with It for now as I said just to learn It. Now to my question, Is there a way to get an automatic screen resolution change to fit the window size of the VM like what I get in VirtualBox?
View 1 Replies
View Related
Nov 28, 2010
I really like the look and feel of Puppy Linux 5.1 but i am still looking around for up-to-date tutorials. For instance how do i download and install new software that is not included in 'quickpet'?
View 6 Replies
View Related
Dec 20, 2009
virtual console (run level 3,5) screen resolution. After installing fed12 the resolution is higher(which is good) then in previous versions. After upgrading from 11 -> 12 the resolution of the virtual consoles stays the same, to large. I already compared grub.conf,i18n which are the same. Where is the resolution configuration for fed 11,12?
View 2 Replies
View Related
Feb 7, 2010
I'm got ubunt-desktop running VirtualBox. I installed MS XP HOME on a virtual disk. so everything *works* .. but I'd be a lot happier to have the box opened up all the way to my Ubuntu top-and-bottom bars.
View 6 Replies
View Related
Feb 1, 2011
I am using Ubuntu 10.10 on a Dell Optiplex GX270, with the Intel video chip. I have a problem with my virtual consoles/terminals (<ctrl-alt>F1-F6). The default screen resolution was set to 1600x1200 at installation, which results in a nearly microscopic, unreadable font. I posted the problem on this thread on ubuntuforums.org, where they suggested adding GRUB_GFXMODE=640x480 and GRUB_GFXPAYLOAD_LINUX=640x480 to /etc/default/grub and /etc/grub.d/00_header. Still no joy--the console screen resolution still was 1600x1200.
I have noticed that the screen resolution changes three times during boot; it starts at standard VGA, 640x480, then switches to 1600x1200, then finally to 1024x768, which is my preferred resolution in X. But, if I switch to a virtual console, the resolution shoots up to 1600x1200 again. There are times when I like to use virtual terminals, and I would like to avoid eyestrain.
View 10 Replies
View Related
Apr 12, 2010
How to change the size of desktop/window fonts in Puppy Linux 4.1?
View 2 Replies
View Related
Feb 25, 2010
I can't change the resolution beyond 1024x768 on my Dell Latitude D600 running 11.2. It's got a Radeon Mobility 9000. The only fixes I've seen involve the Intel 915 chipset not this one. I've changed it in sax but even though it says it should be 1400x1050 it remains at 1024x768.
View 3 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
May 21, 2011
I need to change the screen resolution, but there is no xorg.conf file.. Under system/preferences/screen resolution there is only 800x600 and 640x480 to choose from. I want at least 1024x780.
View 2 Replies
View Related
Aug 17, 2010
Ever since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
View 2 Replies
View Related
May 14, 2010
How can I change screen resolution?
View 4 Replies
View Related
Aug 10, 2010
I'm very new to Ubuntu and have 9.04 running on a Sony Vaio, don't know what graphics card I have. My screen resolution doesn't have an option higher than 800x600, so everything looks super zoomed in. Other threads tell me to edit xorg.conf, which I did (probably incorrectly). The result was the computer had mega problems when I restarted it, and when it finally got back to the desktop it didn't give me any other options for screen resolution. Also it says I'm in low graphics mode.
View 1 Replies
View Related
Feb 14, 2011
I recently upgraded my desktop pc from 10.04 to 10.10 and ran into a tad of trouble. After I attempted to login from the GDM, something caused the system to crash and return to the GDM. So, I got my laptop out, did some googling, and decided to delete ~/.config/monitors.xml to try and reset the resolution. That got me to the Desktop, at which point I was greeted by more display issues.
The point at which the computer normally goes idle seems to crash and return it to the GDM as well. Needless to say, I disabled the idling/password prompt setting to prevent crashes every five minutes. Anyway, the prevailing problem is that I can't change the resolution itself -- as that seems to cause the same issue.
View 3 Replies
View Related
Mar 13, 2011
I've recently installed Ubuntu 10.10 on an old Dell computer I have. Everything seems to work fine, but I can't seem to change the screen resolution. In the monitor Preferences it says Monitor:Unknown. It's stuck on 1600x1200 and I'd like it to be closer to 1024x768
I've tried changing the xorg.conf file to no avail. I've been browsing for 3 days now looking for a solution.
[URL] These are my specs if it helps any, ignore the windows installation info because I have it installed alongside ubuntu.
View 9 Replies
View Related
Apr 1, 2011
I cannot get my screen resolution to change from 1600x1200. This is a new install of Ubuntu 10.10 and the desired option ( 1024x768 ) is listed under System/Preferences/Monitors. Changing the resolution and clicking Apply results in a screen refresh, but the resolution remains at 1600x1200.
I have gone through just about every tutorial and thread I can find, but nothing works. Here is some relevant information I have gathered code...
View 1 Replies
View Related
Apr 2, 2009
How to change the welcome screen resolution? (Where you input the username and password) I use NVIDIA driver which download from its official web site. After reboot, the welcome screen out of bottom.Change session, language and restart computer menu not in the screen. Is there a way to set the welcome screen resolution? or how can I fix it?
View 2 Replies
View Related
Aug 13, 2009
Just installed F11. Been totally frustrated all day and all night with resolutions and DNS bugs. I installed system-config-display so I can get my video working properly. However, my monitor says it's out of range only on the login screen. How can I change the resolution for the login screen to match that of my working environment?
View 1 Replies
View Related
May 26, 2010
How do you get to the place to change the screen resolution through the menus in Fedora 13? When I couldn't find it, I ran gnome-display-properties, changed the resolution, restarted, and when it started back up the resolution was not changed!
What is the recommended way to change the screen resolution?
View 1 Replies
View Related
Apr 25, 2011
it will NEVER let me change the screen resolution to 1440x900. It never gives me the option. I then spend hours looking for fixes, making Xconf files and editing them to no avail. The same is true for Fedora 15 (Beta). what can i do to get the 1440x900 option in my "Display" list in Fedora.
View 2 Replies
View Related
