General :: Change Permission To /proc/net/ip_conntrack On Ubuntu Server 9.10
Mar 28, 2010
I have a script that needs to extract certain information form the /proc/net/ip_conntrack file once in a while. I do not wish to run this script as the root user.
Default permissions for the file is:
I can change it with:
But that does not stick after a reboot. Is there some configuration file for file-permissions in the /proc directory in Ubuntu Server 9.10? Or do I just have to stick a chmod line in some startup script?
View 1 Replies
ADVERTISEMENT
Aug 10, 2010
I've been using Digikam and it's a huge blow to my system memory. Even after quitting I still feel my computer to be slightly slower. I tried running the commands from [URL] but I get this instead
bash: /proc/sys/vm/drop_caches: Permission denied
View 4 Replies
View Related
Jan 11, 2011
How do I change permissions to open /proc/1 thru all/fd at once? In my case, that would be 1 thru 3357
View 5 Replies
View Related
Sep 16, 2010
Trying to change permissions on a file in /proc/sys/fs/inotify. The command syntax are:
Code:
sudo chmod u+w max_user_watches
and the result is:
Code:
chmod: changing permissions of `max_user_watches': Operation not permitted Also tried to change it when logged in as root, same results. Parent directory permissions are dr-xr-xr-x, and are the same up the chain. Tried to change the directory permissions to u+w, that didn't work either. FWIW, /proc is part of the / partition, and it has ~600MB free space.
View 9 Replies
View Related
Jan 4, 2011
I have 3 images made by clonezilla now I want to restore 1 of them, but when I try to use clonezilla to restore, there's no option to restore image. I can see the images in home directory and file is owned by root in my home directory. I'm trying to transfer image to usb hdd.
Did I place image in wrong directory or is it permissions problem.
View 8 Replies
View Related
Jul 6, 2010
I've got the F13 LiveCD that I was able to boot and use using the "nomodeset" boot option. From the desktop I'm trying to perform an Install to Hard Drive. I've read the Install from LiveCD post regarding the creation of a /boot partition and a / root partition. I've tried creating them without the LVM group and with. But every time I appempt to install I get...
An error occurred mounting device proc as /proc: mount failed: (9, None). This is a fatal error and the install cannot continue.
Hardware is a Sager 8887 (P4, 3.06HT, 60GB HDD, Radeon 9000 graphics adapter)
View 7 Replies
View Related
Jun 15, 2011
I have ubuntu 10.4. i install rdesktop 1.7. i run this commands:
Tal is external hard drive connecting at usb in ntfs file system.
I connect to windows 7. i see the hard drive in computer and i can access to files and create new files and folders, but when i try to copy a new file to a folder he show me a error message: You need premission perform this action
Your require permission from computer's administratorn to make changes to this folder tal on my computername
Disk from Remote Desktop Connection.
I try chmode and chowne too but i read i linux forum when it ntfs is no use.
View 2 Replies
View Related
Apr 24, 2011
If I am not the file' owner or root, can I use chmod to change the file permission?
Assume I have group/write access to the file, e.g. 775
View 2 Replies
View Related
Sep 15, 2010
My cd /boot/grub/ shows (required only file shown): -r--r--r-- grub.cfg
I tried to change the permission of this via, chmod u+w grub.cfg but the file permission did not change why??
How can I change the file permission of grub.cfg?
View 1 Replies
View Related
Mar 17, 2010
By mistake I change the permission of /home folder to 666. when I run a $ls -la /home, it is showing following
[Code]...
dl3k is user name and having a folder in /home directory..now I cannot access/open the dl3k folder as a user.
I change the persmission to
# chmod 644 /home (default setting)
# chown -R dl3k /home
but still cannot access the content of /home folder as a user...
View 4 Replies
View Related
Jun 8, 2011
I have a c file, and I want to open it but not in the terminal. After changing the permission, I tried: vi, pico, ed and vim. But, all open it in the terminal. How can I change the permission of that file to be opened and edited not in the terminal? When I change the permission from the terminal, it only let me edit it through the terminal, and when I check the permission of the file I see it as was it (no change). I need a permanent permission. Although, I command as a root.
View 7 Replies
View Related
Mar 27, 2011
I got myself curious on the possibility to change user's permission to any command, or at least giving other users some command line "power".
It all started a few days ago, when another user here, had a problem so that the computer wasn't answering.
So, after waiting a while, chose to hit the Reset button and start the computer again.
Considering this situation, I thought myself that it would have been better to restart the computer, through command line, on any terminal (F1-F6). Anyway, this user is no administrator, thus wouldn't have permission to use the code...
So, is it possible to let other users to use such commands, in order to safe rebooting the system, without logging as root?
View 3 Replies
View Related
May 28, 2010
I tried following the example from here (http:url]......)Open up publicity.html for reading and writing by anyone.
Before: -rw-r--r-- publicity.html
Command: chmod og=rw publicity.html
After: -rw-rw-rw- publicity.html
Here's my terminal session:
username@ubuntu:/etc$ -rw-r--r-- bash.bashrc
-rw-r--r--: command not found
username@ubuntu:/etc$ chmod og=rw bash.bashrc[code]....
View 2 Replies
View Related
Mar 10, 2011
For example /dev/loop*, /dev/raw/*, etc., they are automatically reset to root/root after rebooted.Change the owner/permission of device files maybe not a good idea, though. I just want to know if it is possible and how?
View 1 Replies
View Related
Nov 8, 2010
I am installing oracle 11g on Oracle enterprise Linux 5 i applied all the steps in doc [URL] when trying to switch user to user oracle i am facing the below
[root@oel5 ~]# su - oracle
su: warning: cannot change directory to /home/oracle: Permission denied
-bash: /home/oracle/.bash_profile: Permission denied
View 14 Replies
View Related
Jun 28, 2010
I'm using NetBeans for editing some php files ( in a php project ) at remote server.
all go normal, but when saving the edited file using NetBeans, the file's permissions are set to 0600 by default, making me not able to browse to the file at the remote server till chmod it to 0777 or else.
the main project folder have permissions 0777 and owned to me.
Also the all sub-folders and files under the project's folder have the same permission 0777.
What is the problem ? And how to get over it ?
I'm using Ubuntu 10.04, NetBeans 6.9 ( Final Edition ).
The Connection to the remote server is via FTP in Passive Mode.
View 1 Replies
View Related
Jul 26, 2010
I'm on OS X and mount a network share from my Windows XP machine. Files by default have the rwx (700) permissions. What OS X option I need to change, that the files will have rw (600) permission?
Maybe this question also applies for Linux mounting a Windows network share.
View 1 Replies
View Related
Aug 4, 2011
I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies
View Related
Apr 28, 2011
Looking at the output of a cat /proc/mdstat, how do i know what volumes its actually resyncing? when i do a df -h everything appears to be there.
Personalities : [raid1]
read_ahead 1024 sectors
Event: 2
md0 : active raid1 sdb1[1] sda1[0]
859549696 blocks [2/2] [UU]
[Code]....
View 2 Replies
View Related
May 13, 2009
Just installed a new CentOS with the control panel Interworx. Everything fine, BUT. I can't add new ipadresses cause there is no network device.When i do 'ifconfig' i get the following:
[root@cobra ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1C:C0:A7:25:9F
inet addr: Bcast: Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 1 Replies
View Related
Jan 10, 2011
I cannot make any permission change on /var/log/messages.Currently the permission looks like ?r---ws--t 58243 115 59053 1358438049 Jan 10 10:55 /var/log/messages How can i change the permission to root. Already chown failed giving a permission failed error.
View 14 Replies
View Related
Oct 26, 2010
I had used test desk program to restore my files ,the files that recovered was saved in home folderthe problem is that these files are become root permission only ,so i cantcopy , move theme
View 3 Replies
View Related
Jan 19, 2010
Samba Server version 3.25 The share directory test , the user's permission will be :Users can copy files into the test directory bywindow's file exploer , and after copying userscan'tither delete that files nor recovery them.
View 3 Replies
View Related
Apr 25, 2011
So, the NSA puts out some handy documentation on locking down a RHEL server (running centos 5.6 x64 myself) here, [url]. Under "Ensure System is Not Acting as a Network Sniļ¬er" on page 63, it says that if any numbers below the first line in /proc/net/packet, that it is acting as a network sniffer.
I get the following output:
Code:
Unless I've been pwned, I don't know exactly what could be causing this. Besides samba, nmap (compiled from source, not from yum), screen, and rtorrent, there's nothing I've installed beyond the fresh install I did a few days ago. I was not running nmap when looking at /proc/net/packet.
View 8 Replies
View Related
May 1, 2011
I am working currently on my server on an issue, I configured the SSH Deamon that only people who have a valid ssh-key can login on to the server, and kicked the password option. Now I've added a user account git. I navigate to his home folder created the folder ".ssh" and created in that folder the file "authorized_keys" I copied my public key in there. Now on my local machine I added that identity (via ssh-add) and I wanted to connect to my server. but when I'm trying to login myself I can't the only message I get is "Permission denied (publickey)."
View 1 Replies
View Related
Jan 9, 2010
I have configured samba server.My requirement was that the path which i have to share was /srv/www/htdocs.With this the shared path for developer user was /srv/www/htdocs/projects.
So in the smb.conf file i made the entries as following:
After that root user was able login to both /srv/www/htdocs and also project folder and developer was only able to login to projects folder.That was according to my requirement but now the problem is that when developer is trying to edit any file in projects folder he is getting error that you dont have permissions to change this file.But developer should be able to edit any files. What changes i need to do now.
View 3 Replies
View Related
Mar 13, 2010
A rather new user here, was messing with the preferences on a user folder of mine on Karmic, looking for a way to make the folder invisible to users (like the old windows option). Set it to 'none', then closed it, returned to the directory finding the folder with a box with an 'x' on it.
Went to open it, it says 'access denied'. So I think 'okay, how do I undo that', go back to see if I can restore it back to 'read & write' with no sucess.
Seached the forums for a solution to this issue, most of solutions revolve around 'gksudo nautilus' which I attempted to open via command-line. Nothing seemed pop open after I entered my password in responce to entering said command-line, probably because I really don't know how to use Nautilus.
View 4 Replies
View Related
Apr 21, 2010
I am getting annoyed that every time I try to extract, move, or delete a folder I get:
"Unable to move due to file permission"
"Unable to delete due to file permission"
"Unable to extract due to file permission"
I really have a hard time trying to use, and understand the chmod folder stuff in terminal. So I asked a friend and he helped me create a desktop program or icon where I would just drop the folder I wanted to use on it, and permission wouldn't be needed anymore.
Well, I dropped a a folder on it one day and the folder didn't open, so I tried another folder and eventually the thing never worked again so I removed it.
Is it possible to allow the entire hard drive or OS (Ubuntu 9.10) to give me permission to all the folders? I only installed the [password to log] in thing, so I wouldn't have to worry about people in my house using my computer without consent. If this isn't possible can someone post a method to create the launcher or icon?
Note: I made a root desktop thing (Guy holding what looks to be an ID card) but not even that will allow me to delete the folder in the file system. I the entire game that the folder is called is removed already, so there is no point me leaving this folder alone.
View 3 Replies
View Related
May 3, 2010
I'm trying to move a file to opt folder. But I cant do it because I dont have the permission to do it. In folder preferences it says " you are not the owner"How can I move a file to opt folder? or How can I change the folder permission settings?
View 8 Replies
View Related
Aug 25, 2010
Im trying to run Wow with Wine , But its telling me i need to give to the wow folder write access , so im right clicking on the folder , then Permissions , And it has create or delete folder already on , but right below im selecting Read and Write but it doesnt let me do it :/ just goes back to blank .
View 5 Replies
View Related
