Client OS :- Windows XP
Server OS :- Centos 5.4
Service :- samba or smb
Actually i want to take a back of windows xp's users data which on d: or etc and that backup i want to store in samba share which i made on my centos 5.4 . To do this we need to mount samba share as local drive then any script or any software can detect that share easily in that drive.
my samba server is working properly but i want to mount it permanently on linux (red hat) client.i have tried /etc/fstab and also autofs service but both are not working for me.
1. /etc/fstab i made the following entry in it //192.168.0.254/myshare /temp smbfs credentials=/root/pass 0 0 and when i use comman mount -a it shows "unknown filesystem smbfs" why this is so?
2. using autofs
my auto.master file is shown below
#
# $Id: auto.master,v 1.4 2005/01/04 14:36:54 raven Exp $
#
# Sample auto.master file
[code]....
I'm successfully accessed a local Windows Share folder with the "Places --> Connect to Server" tool, but I can't figure out how to get it permanently mounted so that I don't have to keep logging in every time I boot up. I understand that the solution is supposed to involve adding a line to fstab, but I've tried a dozen variations on it based on various tutorials I've found online to no avail. Is there any way to check and see how the "Connect to Server" tool is doing its magic? Or to make that permanent?
-Brett Bowman
Erdr1ck
System:
Ubuntu 10.10 (AMD64)
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I have been trying to share folders from my main PC which is running Ubuntu 10.04. I have been able to figure out Samba enough to get my a couple of folders shared, but I have been unable to share any folders which are on my external harddrive. After entering the path in my smb.conf file they appear on the network but I am unable to navigate to them. When trying to navigate to them through the network folder on the pc they are actually connected to I get an "Unable to mount location: Failed to mount windows share" dialog box. On the windows pc I am trying to share with I get, "Windows cannot acces \Josh-Desktop
ame of folder"
My smb.conf file looks like this:
That folders I cannot access are Music and Videos.
i hav configured samba share in RHEL 5.4 , it can be accessable from other linux machine but i want to access it from windows machine, how can i do it? i also want want to know that in RHEL my partitions are in ext3 format, so how can windows can detect this partition, Is samba share is independent of filesystem on either machines
case2:---
i hav configured samba on windows server 2008 , how can i mount it on linux machine
I am not able to configure nfs mounted disk for shareing samba. i have a server X. which configure samba for windows XP client this is done. now i have export X server samba share disk to mount Y server using nfs. this is mount and ok. but i don't share this disk using Y server samba configure.
View 2 Replies View Related"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. There are 50 users on my server. Users has accounts on the win-server, but is only using this to read mail. How do I mount a windows share on my Debian server in a way that all my users can read and write there?
View 3 Replies View RelatedI've began to work on getting my access control, set up properly on my server, and want to create a "my documents" folder for each user I add. I do not want it being part of the home directory and have read everything and still can't seem to get it to work. I've got a second drive that is mounted at /private on my server, with a folder that is underlying on it call users and groups. Then from there is has the exact unix username that I set up in Users and Groups. Ex. /private/user/gary . With Samba, I added the following code:
Code:
[My Documents]
guest ok = no
comment = %u's Documents
[code]....
I've tried using %u,%U,%S, and the normal username and of all of them, it will only work with the username. I've even used force user. added root to the valid users list and it still gives me access denied or the multiple connections to a single share with multiple user names prohibited but nothing is mounted on this share. On Webmin, it doesn't show any connections to the share. I'm rather at a stumped state in which is frustrating me, because I want to have this so when I go from my desktop to my laptop I have "My Documents" On either unit. Security on the server is set to User because I've searched to see if I can't find a way to make shares visible by a guest but read only to them and when I access them from my log in to make it read write using the "Share" option.
I wanted to setup a Samba share on a box running Ubuntu 10.4 and share it to Windows 7 computers throughout my house. When I browse the Network (thru Windows), I can see "Media Devices" that correspond with the locations of where I will put the media. The problem is that I have been unable to copy the media to the Ubuntu server because I cannot see the Ubuntu "computer" from Windows 'Network'.
All computers are on the same Workgroup
Running the following command line from Windows returns no errors and lists the samba share:
Using the testparm command on my smb.conf returns only one error (which previous googling seems to indicate is not an issue). The following is what was returned by the command:
Code:
I need to allow my Windows users to be able to check off "Read-Only" or "Hidden" attributes on our Samba share. Currently its not allowing me to do so.
After searching online, I set the map readonly, hidden and archive option to "yes". Then my entire files were hidden.
I'm having a hard time understanding the concept of the "map" option in smb.conf
if i try to connect to my samba server ( share ) from my windows xp ( or vista, i've tried both ) it says, that the network share cannot be found. i've installed all necessary rpms on my fedora 10, necessary for running a samba server:
Quote:
[root@********* samba]# rpm -qa |grep samba
samba-common-3.2.8-0.27.fc10.i386
samba-3.2.8-0.27.fc10.i386
samba-winbind-3.2.8-0.27.fc10.i386
after that, i've configured the smb.conf file, as follows:
Quote:
[root@*********** samba]# cat /etc/samba/smb.conf
#======================= Global Settings =====================================
[global]
# ----------------------- Netwrok Related Options -------------------------
workgroup = GROUP
[code]....
there is no iptables definition, or any other firewall installed, neither on the server nor the client. i've read through alot of howtos an manuals, but was not able to find the problem.
i manged to get a samba server up and running to share with my windows machines. But i still want more. My main goal is to be able to share my movies. I have a laptop hooked to my flat screen with 3TB's of external drives, thats whats acting as my server. I have ubuntu desktop installed because i use it to play movies also.
I'm looking to set up something that is a little faster than samba (yes i no trying to share through USB 2.0 external drives and a wifi connection isn't going to be real fast no matter what) but i want to be able to access my server remotely. like maybe FTP? but what i'm asking here is what protocol should i use and what programs? i was thinking gadmin-proftpd and then filezilla to access?
I can't be the first one with this problem. What am I missing?
I have setup Samba servers in the past, just none under SELinux. The last one I configured was a couple years ago, so I wouldn't doubt I'm a bit rusty.
---- Environment summary:
Clean server install of CentOS 5.4 includes SELinux
- lets call this 'server'
- updated samba to 3.0.33-3.15.el5_4.1
Client1 - Windows XP sp4 - WINS configuration uses 'server' noted above
Client2 - Windows Vista - WINS configuration uses 'server' noted above
---- What works / what doesn't ------
Clients can see the server (XP and vista) in network neighborhood.
The following does not work from windows (xp or vista)
net view
net view \server
net view \server-ip
net view \servershare
This does work on the server
smbclient -L \server
smbclient -L \server --user validuser
smbclient -L \client1 --user validuser
---- What I have configured and tried (config/output below) --------
firewall ports for samba are open
SELinux enforcing or permissive
file context is set on share
samba booleans are set
***firewall
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p tcp --dport 445 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 137 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m udp -p udp --dport 138 -j ACCEPT
-A RH-Firewall-1-INPUT -s 192.168.0.0/24 -m state --state NEW -m tcp -p udp --dport 139 -j ACCEPT
***SELinux mode/booleans
# sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: permissive
Mode from config file: enforcing
Policy version: 21
Policy from config file: targeted
# getsebool -a | grep smb
allow_smbd_anon_write --> off
smbd_disable_trans --> on
# getsebool -a | grep samba
samba_domain_controller --> on
samba_enable_home_dirs --> on
samba_export_all_ro --> off
samba_export_all_rw --> off
samba_share_fusefs --> off
samba_share_nfs --> off
use_samba_home_dirs --> on
virt_use_samba --> off
***filesystem
# semanage fcontext -a -t samba_share_t �/share/photos(/.*)?�
# restorecon -R -v /share/photos
***Disks
]# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 9920624 2070872 7337684 23% /
/dev/sda1 101086 19146 76721 20% /boot
tmpfs 1846656 0 1846656 0% /dev/shm
/dev/mapper/VolGroup00-xen
100791728 202540 95469188 1% /xen
/dev/mapper/VolGroup00-photo00
251981556 191716 238989840 1% /share/photos
/dev/mapper/VolGroup00-dmsdoc00
100791728 192256 95479472 1% /share/alfresco
none 1846656 104 1846552 1% /var/lib/xenstored
***smb.conf
[global]
workgroup = workgroup
netbios name = server
security = user
name resolve order = wins hosts lmhosts bcast
encrypt passwords = yes
hosts allow = 192.168.0.
hosts deny = 192.168.122.
interfaces = eth0
passdb backend = tdbsam
oslevel = 222
local master = yes
domain master = yes
preferred master = yes
cups options = raw
username map = /etc/samba/smbusers
wins support = yes
log level = 4
guest ok = yes
[photo]
comment = Photos
path = /share/photos
read only = yes
guest ok = yes
I'm trying to set up a VPN connection between our CentOS 5.3 server at work and my bosses XP computer at home. At this point, we are kinda locked into Quickbooks. I'm testing the connection from my XP boot at home to see if it works. I can log into our servicemanuals easily enough from XP at home however, the windows takes forever to update. I have the Samba server only listening on port 445 because is seems to work more efficiently at work. I connect to the Samba shares via linux from home and everything works well but, when I try to do anything with the shares from Windows client at home, it's very slow!
I'm thinking that it must have something either to do with the Windows OpenVPN client or the client.conf file. Is there anything I should look at in the .conf file for answers?
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
setsebool -P samba_domain_controller on
Trying to connect to samba locally gives me this:
Code:
[tedward@hp-firegate ~]$ smbclient //192.168.0.1/storage -Utedafur
Password:
session setup failed: NT_STATUS_LOGON_FAILURE
[code]....
I want to setup a Linux File Server for a small windows network (around 50 users). I do know that I am gona need Smb service/pkg for that. I haven't used Samba for a while now and as per the best of my knowledge, entire communication (including usernames and passwords) between a samba server & windows client machines will be plain text. Is there any way to secure all this communication??
Secondly, if i remember correctly, MS windows wont let me mount more than one samba shares as network disk when all my shares can be accessed by different smb users with different passwords?? is there a solution to this problem? OR may be if there is any other package available for this purpose so that i wont have to use samba?
I am trying to mount a shared drive on a Windows Server 2008 machine using a Linux machine (Fedora 13). I try mounting by
# mount //HOSTNAME/SHARENAME /mnt/FOLDER
and I get mount error(13): Permission denied.
I have tried other options like # mount -t nfs //HOSTNAME/SHARENAME /mnt/FOLDER -o username=USERNAME and the same thing with different filesystem types (ntfs, smbfs, cifs).
I have:
checked all firewall configurations.
verified security/sharing settings
for the drive
verified registry keys under HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServicesNfsSvrParameters
verified NFS server is running
I am familiar with Windows Server 2008 but I have never configured a system from scratch on my own. The computer I'm using used to have Windows 7 for sharing folders to a Linux server. I have just switched to Server 2008 and have not been able to mount anymore.
One thing that I think is that I tried setting up an identity mapping solution; however, I do not have a domain controller setup. I am still functioning on a workgroup.
I'm trying to connect to the other computers on the network in my house, but, when I try to view the main file folders it tells me "unable to mount location: failed to mount windows share" I've looked everywhere I can think of and have done everything they've told me to do, and I still can't get it to work.
View 9 Replies View RelatedI have recently set up an ubuntu installation on an old PC. After some fiddling with both it, and the windows 7 machine, I have managed to share all of my drives. However, when attempting to access them from ubuntu, only 2 of the 4 hard disk shares will mount, with the other 2 failing with a Unable to mount location, failed to mount windows share error message.
View 2 Replies View RelatedUsing SUSE 11 with Gnome. I mounted a CIFS share from a Windows server as /mnt/win. With the file browser, I can browse to file system/mnt/win and then the files and folders of the Windows share come up fine and I can open them. When I use the file browser to browse to network, the server hosting this share is listed. Then I browse to that server and it lists no shares (nothing at all). I can't go any further than the server. Is there a separate authentication necessary for the file browser to see this share from the network place?
View 2 Replies View RelatedOK, this is really little to do with Linux, as my question really involves my Vista Home machines. Anyone know good methods to have Windows Vista (Home Edition) machines stay mapped to a SAMBA share on a Linux server? I'm using user-level security on the server (Ubuntu Server 10.10), and it (generally) works really well, but I can't get the rest of my family to use it, as (understandably), they don't want to have to type in their password to the share every time they log in to the Vista machines (or my one XP machine left, for that matter), plus the problems when it occasionally decides it's already tried to connect once and failed, and refuses to "restore" the connection, ugh. I currently have one Win7 machine, and surprisingly, with the Win7 Home Premium edition, it actually "remembers" the passwords to the SAMBA shares.
View 2 Replies View RelatedI have a Samba server running on Slackware 13.0 and its service running with diskspace mounted on a Windows XP machine. Is it possible to mount the XP diskspace on the Samba server?
View 3 Replies View RelatedI spent all day learning some concepts of Samba which I left while preparing for RHCE.One of them is how to permanently mount (fstab entry) windows shared folder.Manually mount command is running fine for me.
View 6 Replies View RelatedI need to mount two Samba shares from my Ubuntu Server to my Desktop they are:
[shared]
path = /media/share
read only = no
guest ok = yes
[www]
path = /var/www
read only = no
I made two directories in my home folder on the desktop called share and www how do I mount these now? I have to use the terminal btw.
If I run the command: smbclient -L //192.168.10.101 which is the IP of my server it works.
Can I share an NFS mount with samba?
Scenario:
ServerA has an NFS Mount to ServerB at mount point /home/qlogger/logs
I can cd to /home/qlogger/logs on ServerA and see the contents as they would be on ServerB (NFS Working with proper permissions rw).
I have a samba share setup on ServerA to share the NFS Mounted Directory (/home/qlogger/logs)
I connect with my windows host and am able to view the files and folders. I can create folders just fine however; when I go to copy a file from the windows machine to the samba share I receive a message saying the file is locked.
I have disabled oplocks in samba and the problem still persists.
I want to mount a samba share form another Ubuntu pc.
With nautilus I can do: smb://xxxxxxx;username@192.168.1.12/sharedfolder/ And i can browse the shared folder without problem
but I want to mount it. I have tried:
Code:
user@compu:~$ sudo mount -t smbfs //192.168.1.12/sharedfolder /mnt/folder -o username=username
mount: wrong fs type, bad option, bad superblock on //192.168.1.64/esco3,
missing codepage or helper program, or other error
[Code].....
Im aware I'm not passing the password and I was hoping it would ask me. Also I'd like to store all that info in my computer and try to auto mount the shared every time i use the pc.
One problem I'm having is with getting some apps to access NAS hosted files and folder over samba. Two examples are photo managment apps and backup apps, which seem to only want to work with local files and folders.I have come across a number of articles about cifs, autofs, gigolo, fstub, etc (including the autofs community documentation). But so far I've had no luck in auto mounting a samba shared resource as local.
Can anyone point me to a definitive tutorial, or provide an explanation on how I might accomplish auto mounting samba shares?
I am trying to mount a file server directory on a client machine. I tried using NFS, but could not mount the share on the client. Several respobses were given to a post on this problem. but I still was not able mount the NFS share. I decided to try instead to mount the directory as a Samba share because I can already access it using Samba from windows, or from KDE or Gnome using smb://fileserver as a desktop location icon URL. When I try to mount the Samba share I get error messages that nearly identical those that occurred with NFS. . Here are some of the setup parameters
CentOS 5.4 on client and server behind a D-Link router
server IP: 192.168.0.44 (can ping it client)
client IP: 192.168.0.101 (can ping from server)
[code]....
This is the only error message that these commands have produced in the messages log, secure log or smbd log for either machine. My immediate goal is to set up the simplest possible local mount that will allow Grsync to backup to the file server.
I have a Dell Inspiron 1720 running Ubuntu v10.04 with a wireless card.My desktop is a Dell Optiflex running WinXP.The desktop is connected via ethernet cable to a Linksys wireless router. Certain folders on the desktop are set for sharing. Up until early last week I was able to access the desktop folders from the laptop with no issues.Suddenly I am now getting this error "Unable to mount location Failed to mount Windows share" whenever I try to access the desktop folders from the laptop.I suspect an upgrade is the culprit, but not sure.
View 3 Replies View Related