OS: Kubuntu 9.10
Printer: Canon i550
I have tried selecting many of the drivers located on localhost:631 and none of them work. i550 is not in the list of drivers. When I select i560 it will print if it is only one line after that it seems to get confused and doesn't print. Sites that I have looked at [URL]...
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI can't get my ubuntu 11.04 to print on canon pixma ip2772, it says that I got canon ip2700 series installed, and show that I am printing a test page, but nothing happens on the printer.
View 4 Replies View RelatedRunning Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!
View 4 Replies View RelatedHow do I get the configuration page for a Canon PIXMA IP1600 to print?
View 1 Replies View RelatedI cannot print with my Canon MX860. I have downloaded the proper drivers from the Canon Europe website and forced the arch to x64 as described on many sites. When I try to print a test page I get the error that "Idle - /usr/lib/cups/filter/pstocanonij failed". I have checked in lib64 and pstocanonij was there as well. If I change the URI from USB to CNIJUSB then I get the error that "cnijusb has failed". It may be possible to get this working as in another forum someone claims to be successful. I am able to use the scanner with the sane-backends package, so that is not a problem.
View 6 Replies View Relatedit is shown as my default printer, and even spits out a sheet when I try to print something. The 'Test Page' actually includes some ink and lines but does not look like the real thing.
View 5 Replies View RelatedMy canon mf 4018 could not print in Centos 5.5 What I did before: I chose Administration/printing and there I tried to add new printer. Unfortunately, I could not find my model of the printer in that list. I used also official canon site to find a driver for Centos 5.5.
View 2 Replies View RelatedAfter I install my print Canon LBP3010 following this instruction: Fail to print with Canon LBP3010
[Code]...
I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
I am trying to install a Canon MX922 printer on LMDE.
I ran ~/Downloads/cnijfilter-mx920series-3.90-1-deb (install.sh wont find wired lan printer with IP 192.168.0.14)
Installed these:
cnijfilter-common - IJ Printer Driver for Linux.
cnijfilter-mx920series - IJ Printer Driver for Linux (these repo drivers don't even show up when I go to add printer)
I tried system / admin / printing / add printer (and it FOUND the printer! But it won't print.)
Recently brought new printer Canon LBP 2900B.
I have downloaded drivers form canon website ([URL])
When I switch on the printer, it will be detected.
But when I click print button in any of document, it won't start printing. In job queue status shows "Processing". I have waited for 15 minuets printing didn't started.
I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.
View 6 Replies View RelatedI recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.
First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.
Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?
I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies View RelatedF13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:
[code]...
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).
I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.
I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.
Trying to make a Canon Pixma 3-in-1 MP250 to work with my Slackware. I've took the drivers from the canon website (they have .deb, .rpm and sources there) and compile. Basically I followed the instructions from INSTALL files in each subdirectory (backend,cngpij, etc).
Then I upgraded also CUPS to 1.4.3.
Installing the printer in CUPS, I end up with:
Code:
Description:Canon MP250 series
Location:
Driver:Canon MP250 series Ver.3.20 (color)
Connection:cnijusb:/dev/usb/lp0
Defaults:job-sheets=none, none media=iso_a4_210x297mm
It seems ok. But when I send a test page (or any other kind) to printer, it shows some activity on the led display, cups reports the job as completed but nothing happens!
As an extra, I tried to convert .deb packages to .tgz and install from them. The same result, except now the scangear utility is working (so scanning is ok).
How can I find what's missing from here? Maybe it's a bug with cups/drivers or something is missing from configuration?
p.s. On other machine I have an Xubuntu (Karmic Koala). Installed there from .deb packages and the printer works as expected.
I searched for solutions for hours and yet can't manage to get my printer to work. I downloaded (as it was suggested elsewhere) the "cnijfilter-common" and the "cnijfilter-ip2600" that I found on Canon website. However when I want to install the first package, it says : "Error : Failed to satisfy all dependencies (broken cache)". (I use Ubuntu 9.10) Edit : I found that the missing dependency was "libcupsys2" but I can't find it on Synaptic...
View 5 Replies View RelatedHow can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.
I am brand new to Ubuntu (1 day). I can find my way round most things but I can't print to my Canon Pixma. I have tried to download Australian drivers from a 2007 thread but when I try to download I get the error message "wrong architecture i386". My computer uses an AMD Athlon IIx3 processor. When I say can't print, the file goes into a print queue but the printer does not respond at all. I can see the printer when I go into system, admin, printing.
View 14 Replies View RelatedI have done a fresh install of Ubuntu 8.04 on my partners desktop PC and am attempting to get her printer working, so far no luck. Ubuntu does not list a specific driver for this printer in 8.04 Printer is a Canon laserjet model L1112E according to the label on the printer itself but the printed instruction leaflet calls it a LBP 3000.Canon website offers a linux driver for lbp3000.
View 9 Replies View RelatedI have an ubuntu workstation 8.10 and wanted to know if I could monitor Canon printer queues , (see jobs, start/stop queues) etc. Similar to what my xp workstation does with the canon fiery sw.
View 4 Replies View Relatedwhere I can get a driver?This Printer worked fine with Ubuntu 10.10 and Mint 10
View 4 Replies View RelatedI recently bought a used Canon IP1600 Inkjet Printer. It did not come with the cd-rom to install and set up this printer. I downloaded the driver. And i recieved a message saying my system is not modified.
View 1 Replies View RelatedI have a Canon Pixma Ip1300 color printer but I don't know how to install it on ubuntu 10.
View 3 Replies View RelatedI've been running Xubuntu 9.04 for the past couple of months but have difficulty installing my Canon MX-860 wireless printer. Everything else works perfectly and connects wirelessly to internet. Since I run a couple of other Win based computers, printing from the Toshiba 1100 laptop hasn't been a problem. It would be an advantage. I tried to install the latest Xubuntu distro on the Toshiba and it installed but could not connect to the wireless Atheros card. Where should I start? get Distro 10.04 working first or try and install the printer with the existing distro?
View 7 Replies View Relatedwhere can I find the necessary drivers etc for the above tx
View 3 Replies View RelatedAre there any (easy to install) (X)SANE backends for Canon PIXMA MP460?
View 1 Replies View Related