Fresh install of Ubuntu 10.04 x86_64.
I've tried to disable cups service from sysvinit scripts, but why cups is still starting with the computer?
Code:
root@computer:/home/user# update-rc.d cups disable
update-rc.d: warning: cups start runlevel arguments (none) do not match LSB Default-Start values (2 3 4 5)
[Code].....
I have cups 1.4.1 on ubuntu that act as print server that receive print request from Oracle Applications 11i on hp-ux and sends them to windows clients.
Clients printers are from different vendors like Samsung, HP and Kyocera.
Some printers print request with Cover Page with content of "job-id job-name job-originating-user-name job-originating-host-name job-billing" like Samsung ML-2250 or HP Laserjet 1100
but in Kyocera print without banner.
I've been using linux for a few months. Recently I have installed debian jessie and I'm learning how to secure my laptop. I have installed
Code: Select allapt-get install sysv-rc-conf
to shutdown few services that I believe I don't need at boot which I found very useful. Among others I have deselected avahi-daemon, cups, cups-browsed, etc. The problem is that, after rebooting, when running:
Code: Select allnetstat -lntup
I still find 'avahi-daemon: r' and 'cupsd' running. I have tried
Code: Select allsystemctl stop cups
systemctl disable cups
systemctl stop avahi-daemon
systemctl disable avahi-daemon
But after rebooting these services are aklways running. I do not know whta to do.
Output of netstat -lntup
Code: Select all[*]Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 250/cupsd
tcp6 0 0 ::1:631 :::* LISTEN 250/cupsd
udp 0 0 0.0.0.0:16409 0.0.0.0:* 526/dhclient
udp 0 0 0.0.0.0:68 0.0.0.0:* 526/dhclient
[Code] ....
I'm aware that cups seems to work just for my printer but I do not understand why I can't just disable it.
I have Lucid Lynx with Gnome and Kernel 2.6.32 installed. Which probelms can I get if I disable Power Manager (Power management daemon) from the startup?
BTW does
Code:
xset -dpms s off do the same thing like disable Power Manager in the Starup Applications or DPMS is just for the Monitor?
This may be posted some where but I searched and searched and searched and all old post that don't work. I'm using 10.10
why is port always opening code...
How to permanently disable the gnome-keyring-daemon.
I've seen posts where there was a work around to store passwords in clear text. That's not a real solution. I've seen posts where killing the process and removing ~/.gnome2/keyrings is a temporary solution until next time you log in or reboot machine. Removing the package, will force removal of the whole kitchen sink. That's too intrusive.
There must be a way to stop this thing from starting up, ever.
I tried commenting out the entries in the /etc/pam.d/* files that refer to "pam_gnome_keyring.so", and have also unchecked the 3 keyring related entries under System --> Preferences --> Startup Applications, which are affiliated with these 3 files:
But I still get this one process once I log into the console window:
There must be one more file somewhere that says, "hey when someone logs in and starts up gdm, start the gnome keyring daemon".
Code:
test@denial:~# ps -e | grep snort
18470 ? 00:00:00 snort
how do i disable snort daemon at start up? i only want it to be running when i want it to be running.
I have a printer configured on my Ubuntu server using CUPS amd made it available to the local network. The printer is recognized on my other Ubuntu machine without any problems.
But on my Suse laptop, the printer is not recognized. Using the YaST printer Configuations, I choose the option "Recieve Printer Information from Remote CUPS servers. But no printer is found.But... when I choose Do All Yout Printing Directly via One Remote CUPS server and enter the correct IP address (192.168.1.100), the printer is found andI am sure the printer info is broadcasted because it shows up on my second Ubuntu PC. But why is it not recognized by default on my Suse machine
I know this is listed somewhere but I cannot seem to find it -
How to I add a root users to access the 127.0.0.1:631 interface for CUPS?
Running: Ubuntu 10.10
I'm in a bind and I don't know how to get what I want. Nmap shows ipp running cups on port 631. Great, simple enough I uninstall cups, along with its dependencies. A new portscan reveals that the port is closed SUCCESS, but... Ubuntu Update Manager nags me @ every restart about the "important security" updates. I can't lock the version of cups in Synaptic, because cups is not installed! So you see I'm in a bind. If I have cups installed I have an open port, and if I uninstall cups the update manager nags me. What do I do? I've tried:
- stopping the cups service and issuing the chkconfig cups off command... (doesn't close the port)
- uninstalling cups... (update manager nags)
- fuser -k 631/tcp (great, but @ reboot the port is still open)
Please teach me how to close this port / stop this service / tell update manager to shove cups.....
I've been trying to figure this out for longer than I care to admit. We upgraded our print server (sysadmin) to 64 bit lucid and that moved our cups server from 1.3.7 to 1.4.3. We have a remote server that is still 1.3.7 (printhost1) but version difference doesn't seem to be relevant to the problem.
If I'm on console on sysadmin and do an lpr to a printer on printhost1, everything is copacetic. However, If I'm on a host that specifies "ServerName sysadmin" in its "/etc/cups/client.conf" access_log on sysadmin shows:
172.16.10.52 - - [22/Mar/2011:11:11:40 -0500] "POST /printers/103_hp4250 HTTP/1.1" 200 306 Create-Job client-error-not-authorized
and error_log shows:
E [22/Mar/2011:11:11:40 -0500] Returning IPP client-error-not-authorized for Create-Job (ipp://localhost:631/printers/103_hp4250) from 172.16.10.52
We've been using this method of sharing printers between locations for years and years so it not working now is a surprise.
cupsd.conf on sysadmin looks like this and is as open as I can imagine:
ServerName sysadmin
ServerAlias *
ServerAdmin webmaster
FileDevice Yes
SystemGroup staff
LogLevel info
code....
Additional symptoms are that only printers locally defined on sysadmin show up when the client uses System>Administration>Printing in gnome. Same thing when you browse printers in windows on our samba domain controller that backends on CUPS.
I just know that it's something simple that's going to make me facepalm but I'm at a loss.
cups does not start with the server. When I try to start from the terminal I get the error message
cupsd: Unable to read configuration file '/etc/cups/cupsd.conf' - exiting!
cupsd: Child exited with status 1!
The log files show nothing. cupsd.conf exists. It is user - root and group - root with permissions set at 0644.
My interpretation of this is that the program is not launching from either boot or terminal for a fundamental reason. I do not quite see what that reason is .
I have Ubuntu 10.04 with Gnome. Whenever I put in a blank CD/DVD an icon on the desktop appears named "Blank CD/DVD" and a window appears asking me what I want to do with it. How do I disable the window and the icon from the desktop?
View 2 Replies View RelatedI have installed Slackware 13 on one of the hard disks of my computer in order that I can get it working properly before changing over from 12.2.
My main problem is that I cannot get CUPS to change from 'Letter', which I presume is an American size, to A4, has anyone else had experience of this problem?
installed lenny and am trying to install brother dcp7010 again:
1) i can't start CUPS server with /etc/init.d/cups restart "file not found", there is a cups@ link in /etc/init.d.
2) when i install dcp7010 cupswrapper
dpkg -i cupswrapperDCP7010-2.0.1-2.i386.de
it ends with
" lpinfo: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt
lpadmin: Verbindung zum Server nicht m�glich: Verbindungsaufbau abgelehnt"
(connection to server not possible, refused)
3)[URL] doesn't work.
4)foomatic-gui can't find the installed dcp7010 lpr-driver
brdcp7010lpr-2.0.1-1.i386.deb, (a couple of days ago it did)
This is frustrating because it worked in etch and worked for awhile in lenny. The dcp7010-scanner does work.
I have a minecraft server running as a daemon. When you run it normally (not as a daemon), you can type commands into the console. How can you get to the console so I can send it commands while it's running as a daemon?
View 1 Replies View RelatedI was thinking about getting a kiosk or two I thought since monitors are facing potential customers and we'll be behind a table I'd be hard to see if something gone wrong/needs our attention. How might I capture all the machines screen on my own? I'd need some kind of daemon in the background. I may have VMs so I'd either need it to work on the OS capturing what is shown in the VM or have it installed on each VM. My machine would likely be windows. I don't need to take over and control the screen but that may be nice since I wouldn't need to walk around to fix something.
View 2 Replies View Relatedi am running a sabayon linux system 5.0 when i attempt to log in onto my user account it fades back to log in page. i attempted to log in on the console and it still wont do so, but the avahi daemon does have two exclamation points in red which signifies to my mind an issue with avahi.
i log in as root and the computer opens...i go to system and it says the avahi daemon is not activating..my question... do i need the avahi daemon or is it redundant?would removing avahi damage the over all operating of my computer or should i have a geek reconfigure it
Just wondering how to restart my USB daemon in slackware 13.1... can't seem to find the right command anywhere
View 3 Replies View Relatedeach time my linux is booting, it check something like eth0 and something else. but there is something i write below that fail... Code: could not receive return value from daemon proccess?
View 3 Replies View RelatedI am using CentOS 5 Both a production server and VM CentOS get this problem.When issue:
# /etc/rc.d/init.d/haldaemon start
Starting HAL daemon: [FAILED]
I have installed version of ntop 4.0.3 by guide.But I can't start ntop daemon/service. I didn't find a service file for starting.During the installation there was no problem only want to RRDTool so I installed that. Now there is no necessary package required.
View 1 Replies View Relatedi've written a script that will move some files from one directory to another, i dont know if this is the right place to ask but, this is on my ipod touch and i'm wondering how to make it run periodicaly
View 6 Replies View RelatedI need to allow certain users (who do not have root access) to be able to stop and start specific daemons
View 2 Replies View RelatedIf i were to build an sftp client which launched with logon details, and could then controlled by sending commands to that daemon; would that be ideal way to create an sftp client with disposable credentials?
View 1 Replies View Relatedmy Sabayon desktop won't boot into runlevel 5 anymore:
Code:
ERROR: avahi-daemon failed to start
Also can't start avahi manually, verbose mode gives no extra information, debug says: (...)
Code:
* Starting avahi-daemon ...
+ /usr/sbin/avahi-daemon -D
+ eend 1
+ exit 1
* ERROR: avahi-daemon failed to start
(sic)
I suspect this to be related to the hplip drivers I installed before the last reboot, all I did was select the package in sulfur, and as it worked right out of the box, I changed nothing else.
I want to write an operating system of my own ! I've started studying Minix. For getting started I wanted to know is there a way to write and add a background process [printing 'hello'] in the Minix operating system ?
View 7 Replies View RelatedHow would you use chkconfig to set the bigd daemon to start at runlevels 2 & 3?
View 3 Replies View RelatedStarting mysqld daemon with databases from /var/lib/mysqli m installed mysql-5.0.77-4.el5_5.4
[root@serv ~]# mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
[root@serv ~]# /etc/init.d/mysqld stop
[code]....
I have an Epson Stylus NX515 multifunction printer connected wirelessly to a COMPAQ Presario V4000. I was having no problem with the printer and it was working fine under Slackware 13.0 running CUPS 1.3.11 with the standard CUPS driver for Epson printers.I recently upgraded to Slackware 13.1 which comes with CUPS 1.4.3, during the set up I had CUPS search for my printer which it found and I loaded the standard driver. When I printed a page it comes out all black. I then down loaded the Avasys Epson-Stylus_NX515-pipslite-en.ppd and pipslite_1.4.0-5 software and installed them both. I restarted CUPS and odified the printer in CUPS to use the pipslite driver
View 2 Replies View Related