General :: Convert Ext3 To Ext2?
Mar 28, 2011
I would like to convert my /tmp and /boot partitions from Ext3 to Ext2 on my Arch Linux setup. I don't see any use in having journaling for either partition. I want to make sure that I have the right steps lined up so could someone verify that this is correct (from a live cd):
Code:
#sudo tune2fs -O ^has_journal /dev/sda7
#sudo e2fsck /dev/sda7
#sudo tune2fs -O ^has_journal /dev/sda5
#sudo e2fsck /dev/sda5
I then edit /etc/fstab to reflect these changes (ext3 to ext2 for both lines)
Does it matter what order I do it in (/dev/sda7 is /tmp and /dev/sda5 is /boot).
View 3 Replies
ADVERTISEMENT
Nov 5, 2010
I have a question, i accidentally formatted an lvm volume as ext2 after creating it. Then of course, we copied a ton of data to it before I realized it was ext2. (I guess ext2 was the default when using mkfs without a -t) Anyway - can I just use tune2fs -j on the LVM just like I would a /dev/sdx device?
View 2 Replies
View Related
Jan 24, 2011
How to convert all ext3 partitions to ext2 on a existing Lenny without damage a system?
Code:
View 2 Replies
View Related
Apr 22, 2011
We are running debian off of an SD card and want to know what's best for /var?
- Plenty of room on 2GB SD card, so do we, make /var as large as possible (everything else is read only) to reduce block overwrites, or do we make /var as small as possible, hopefully reducing the load 'pdflush' places on the 200 Mhz system?
That said, why not ext2? Is there damage that can happen in /var due to insta-crash or power loss that will prevent proper system function? We heard ext4 is more optimized, but ext4 on 2.6.29, not sure.
If we must use a journaled file system for /var, then which is lowest load on system, or "better": jfs, ext3, jffs2 ...
View 1 Replies
View Related
Mar 10, 2010
What is attribute?
How list the attributes?
What is the diff b/w ext2 and ext3?
What is the types of files?
What is the drived files?
View 3 Replies
View Related
Aug 26, 2010
i m not able to copy a file over 16 gigs on an EXT2 or EXT3 partition. Is there a way to do this. I even tried to split my iso file too. I splitted my iso file in 4 files then copy them on the ext2 or ext3 partition. But as soon as I was trying to join the files together it never went over 16 gigs. Actually it stops at 16,843,020 kb exactly. is there a limit for those partitions or is there an another way to see my 20gigs iso file in one piece?
View 1 Replies
View Related
Oct 28, 2009
I have ext3 partition mounted on /mnt/shared/ as follows
Code:
Permissions above are of the actual mounted fs.
Goal is to have all files created on the fs
1) to belong to group 'users'
2) to have this groups permissions set to rw (rwx for directories) so that all users who belong to group 'users' have full read/write access to data and everyone else to have only read access.
Now because of setgid bit (s) in group permissions every file created has group 'users' and additionally setgid bit is set for directories. Because every users umask by default (on my system) is set to 0022 all created files will have permissions 644 for ordinary files and 755 for directories.
Net result of above means that users A and B who both belong to group 'users' won't be able to modify files created by the other.
So how can I make files created on the fs to be created always with umask 0002 WITHOUT changing default umask for users that is used elsewhere (like in their home directory) ?
View 1 Replies
View Related
Apr 23, 2010
I am planning on dual-booting Windows XP and Ubuntu on a new laptop, and because I have a program that lets me mount an ext2 filesystem on Windows, I was thinking of installing Ubuntu with ext2 instead of ext3. I am concerned, however, that it might open up a security risk for my Ubuntu partition. Would this cause a problem? (In case it's relevant, I use AVG Free antivirus in Windows.)
View 7 Replies
View Related
Nov 5, 2010
I use 8GB USB sticks for backup of Ubuntu 10.04. I have had a variety of problems with ext3 format (security tar file not readable, etc) and have reformatted to ext2, so far without a problem.
But - am I missing something by not using ext3 (or even ext4)? Should I be sticking with ext3 and try to resolve the problems - bearing in mind that as the USB stick is my backup I need it to be secure!
View 2 Replies
View Related
May 4, 2009
When installing fedora 10 from scratch on an acer aspire one 150L, which filesystem should be used? ext2 or ext3? a basic explanation of the reason would be great too.
View 3 Replies
View Related
Apr 30, 2010
I run an upgrade and an update on a lucid lynx beta 2. --- got no problems. but about the filesystems i have some questions because it seems for me that at every system boot the system will run an fsck. somtimes it's shown up, somtimes not. but in /var/log/messages and in syslog
I have always following messages ( occured in beta 2 too ).
But first before i continue - here my disk layout:
And here my filesystem types:
This is my problem because those values are seems to be static ! ( note: this partiton is mounted but not in use ) and last not least: the drive is an external usb scsi disk. but on the other side lucid lynx is running fine on my box.
View 3 Replies
View Related
Jun 1, 2010
I have a new Vertex2 Solid State Drive. When I try to install any distributions, formating the drive in EXT3 or EXT4 (or LUKS with EXT3, or EXT4). My hard drive times out during a copy process. (OpenSUSE 11.2 for example would crash after the 2nd file of X11. Debian got ~12% done when it crashed.)
DISTRO'S ATTEMPTED:
Ubuntu 10 - x64
Debian 5 - x64
PCLinuxOS 9 - x32
CentOS 5.4 - x64
[Code]...
View 1 Replies
View Related
Jul 1, 2010
I am student of MCS and working on final project. I am the user of windows xp. I am new in Linux. I am working on a project that titles "Hard disk data Recovery of ext2 and ext3 in linux". In windows, including dos.h and bios.h header files in program of c language I can send interrupt to bios and access most of the devices like parallel port, hard disks etc. But problem is that there is no bios.h and dos.h files in gcc. Now how can I access my hard drive using c program. How can I call int13h interrupt in linux or there is any other function in the linux to access the hard disk. In fact I want to access sectors of my hard disk using c language program. How can I do it?
View 2 Replies
View Related
Nov 13, 2010
how can i locate an Ext2 or Ext3 file system by using the terminal?
View 2 Replies
View Related
Sep 1, 2011
I want to convert my swap space 8GB to usable formatHere is the output of sudo fdisk -l command$sudo fdisk -lDisk /dev/sda: 80.0 GB, 80026361856 bytes255 heads, 63 sectors/track, 9729 cylindersUnits = cylinders of 16065 * 512 = 8225280 bytesDisk identifier: 0x26af26ae
Device Boot Start End Blocks Id System
/dev/sda1 * 1 2295 18434556 7 HPFS/NTFS
/dev/sda2 2296 9728 59705572+ f W95 Ext'd (LBA)
[code]...
View 3 Replies
View Related
Mar 9, 2010
how to convert ext3 to ext4? I'd like to convert partitions which I use for virtual machines (vmware-server and virtualbox). I use Ubuntu 9.10 as vmware-server host and Gentoo as virtualbox host.
View 5 Replies
View Related
Jan 19, 2010
During the file system check of an ext3 partition at boot I get the following output:
The super-block could not be read or does not describe a correct ext2 filesystem. If the device is still valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate super-block:
I'm then forced to login in as root and given the following prompt:
I'm reluctant to do as advised by the output and run e2fsck -b because it is not an ext2 filesystem.
Although I can still enter runlevel 5, it doesn't seem to recognise mouse and keyboard input in KDE so my system is effectively redundant at the mo. For this reason any short term workarounds are welcome, but a fix is needed. This problem is part of a longer saga to do with recovering a Windows Vista installation which started failing to boot. I have used both Vista and SUSE tools to try and recover my bootloader to no avail, and this has been the result. If more detail about this is needed please ask and I can explain what I have done.
View 9 Replies
View Related
May 16, 2010
I just rebuild the kernel for slackware 13, everything works, but root file system which is ext3 is mounted as ext2. Normally I've build ext3, ext4 and so on as modules, not in the kernel... but if I do this, then the kernel mounts the file system as ext2, which is build in the kernel. I also modified rc.modules so I can make sure that ext3,ext4,jbd are loaded, but it doesnt work.
View 2 Replies
View Related
Mar 27, 2010
I have dual boot system..i.e, windows XP and ubuntu 9.10(insatlled side by side). when i try to boot ubuntu, Im gettin sh:grub > prompt
[Code]...
I am getting something like this.. root mount file system failed.. ext2 ext3 ext4 ....... kernel panic message and hanged at kenelthreadhelpper+ what can i do.. I cant reinstall ubuntu again.. Because I have installed nany application there..
View 1 Replies
View Related
Sep 14, 2010
I have a installation of Ubuntu on a flash drive that I just finished updating, etc. I noticed that it ran surprisingly slow during all my updates and software installations. I looked into it further and found out that for Flash Drive installations, it is recommended to use ext2 due to it's speed and lack of journaling (to limit the amount of writes to the disk).
I REALLY don't want to spend all the time and effort I have just spentt on reinstalling from scratch! I'd like to convert my partition filesystem from ReiserFS to ext2. How can I do this?
Can I backup all the information, do a new installation using the LiveCD, and restore the backup? What program can I use, and which directories do I need to backup?
View 1 Replies
View Related
Oct 31, 2010
I have a usb flash drive and according to sources I found out after the fact that I should have used ext2 instead of ext4 due to the extra write operations.
Is it possible to convert the ext4 root partition to ext2 or do I need to backup, reformat, and restore?
View 1 Replies
View Related
May 17, 2010
I had Lenny with ext3 installed on my notebook. I've done the Upgrade from Lenny to Squeeze. Howto and should I convert ext3 to ext4?
View 5 Replies
View Related
May 21, 2010
I've Squeeze installed on ext3 (Upgrade from Lenny). Howto convert ext3 to ext4?
BTW What are advantages & disadvantages of ext4?
View 4 Replies
View Related
Jul 24, 2011
I need to convert my server(10.04) to ext4 from ext3 and want to make sure I am going to do this the correct way.
Edit fstab to ext4
Code:
sed -i s/ext3/ext4/ /etc/fstab
Run the tune2fs command, the filesystem is mounted is this ok?
Code:
tune2fs -O extents,uninit_bg,dir_index /dev/md0
[Code].....
View 2 Replies
View Related
Jul 28, 2011
I have squeeze with ext3 installed. Howto convert ext3 to ext4 without lost data or damage a running system?
View 3 Replies
View Related
Feb 25, 2011
I have 2 external drives that I'm using for movies and they're both formatted to fat32. The problem I'm experiencing now is that some of the high quality mkv files are not able to be moved to the drive because of fat32's limitations.
I'd like to convert to ext3 (or 4) and I wanted to check to see if I can do it without having to reformat and without loss of data.
View 4 Replies
View Related
Jul 9, 2011
I've lost my admin password on my current Windows OS and would like to install Linux Ubuntu or a similar user-friendly distro of Linux alongside, see how that goes and possibly reformat my PC with Linux as I was told it would convert NTFS formatted drives to ext3, not delete them.
View 9 Replies
View Related
May 20, 2011
I Tarred and GZipped most of the data on one 1Tb partition and stuck the archives on a second 1Tb partition on a separate disk. I then proceeded to format the first partition with NTFS (from Linux.) The only problem is that I completely forgot that I had a CD drive and formatted sdc1 instead of sdd1! I began doing a full NTFS format and after a minute or two I cancelled it and decided to do a quick format. I then realized my mistake. I managed to find a copy of the superblock and began trying to recover the disk. fsck -t ext3 recognized the partition as NTFS but I luckily didn't have fsck.ntfs installed so it didn't touch it. I managed to get it working with fsck.ext3 (with -b,-B and -y) fsck.ext3 didn't mind that it was an NTFS partition.
Roughly how long will this take? It's running from Knoppix within a virtual machine to a USB hard drive which is 100% full. Days? Being that for a few minutes I attempted a full format am I going to end up with a bunch of corrupted archives? If I do end up with file corruption can anyone recommend a way of recovering the data / sorting it out? Is it likely to be just a few old files that are corrupt (It's my understanding that filesystems like to keep files in the same area on the disk to minimize the amount of head travel.) This might just be wishful thinking but as the filesystem fills up will ext3 put the newer files towards the end of the disk? If so then I'm hoping that a full NTFS format starts at the beginning of the disk.
View 6 Replies
View Related
Jul 18, 2010
I'm trying to use convert, I have installed the imagemagick. I use this line:convert *.jpg test.pdf but I'm only able to convert to pdf 1 single jpg file, not multiple files at once. When there's more than one file, I get the following error: Segmentation fault
View 5 Replies
View Related
Oct 31, 2009
I had to install a new disk drive in my PC a week ago because the old drive died. The new drive is a 160 gig drive. First I installed Win XP with S/P 3 and everything was fine. Then I installed Ubuntu 8.04 and the troubles began. Ubuntu resized the Windows partition down to 8.81 gig and used the other 137.44 gig for Ubuntu. When I booted into Windows I started getting nasty little messages about "not enough disk space". SOOoooo....... I booted using the Ubuntu install CD and ran "sudo gparted" in a terminal window. I tried to resize the ext2 partition but got an unknown error.
Then I ran fixmbr in Windows to get rid of grub. Then I tried running gparted again to delete the ext2 partition. Got an error that said "can't delete the partition because it's mounted". So I tried to unmount the partition but got a message that the command "unmount" could not be found. After that I installed Partition Magic in Windows and tried that. It sees the ext2 partition but says it's unsupported when I try to delete or resize it.
I ran fdisk but it doesn't see the Linux partitions either, so I can't delete them in that program. I finally tried to format the disk but now I have a 9 gig drive with nothing on it. How do I get those Linux partitions off the drive so I will have a 160 gig drive that I can start over with? I've spent 6 days this week reinstalling XP and all of my programs, and now everything is gone because Ubuntu decided to be a disk hog.
View 4 Replies
View Related
