Fedora Installation :: Nothing But A Blinking Cursor After Grub?
Jun 18, 2009
I installed F11 without issue but after rebooting all i got is a blinking cursor with no error messages or indeed any other form of feedback.
To check i was even getting as far as grub i went into rescue mode from the dvd and edited the grub.conf to remove the hiddenmenu option and set the timeout to something a little larger. This confirmed that grub does in fact seem to be loading fine. Selecting the Fedora entry still however leave me with just a blinking cursor.
Next i tried removing quiet from the boot commandline. same result.
Just in case i had the wrong disks configured in grub i tried swapping root(hd0,0) with every combination available with as expected various errors about either partition not being suitable or files not found.
Using grub to boot manually to a usb disk worked fine so grub does seem to work.
With no feedback at all i tried all the common options people suggest just in case the kernel is booting but not getting far enough to output to the screen. So far i tried noapic acpi=off nomodeset.
I tried installing 3 times so far with slightly different configurations just in case but still no luck.
Basic partition layout in case it helps:
/dev/sda <-- boot loader installed here.
/dev/sda1 /boot ext3 2GB
/dev/sda2 swap 4GB
/dev/sda3 / ext4 634GB
Various other disks are present but not part of the configuration. I double checked they are not mentioned anywhere in the common places like fstab.
View 5 Replies
ADVERTISEMENT
Apr 21, 2015
I'm thinking about switching to Debian from Ubuntu, so I installed Debian (debian-7.8.0-amd64-DVD-1) in dual boot with my Ubuntu 14.10 (Uefi install). Installation process was OK (I think), I got a working GRUB that recognizes both OS, but Debian boots to a blank screen with a flashing cursor in the top left corner (Ubuntu boots perfectly). I also ran into some graphics-related problems while installing/booting Ubuntu, due to my AMD GPU graphics, that I solved adding the nomodeset option to the kernel in GRUB, but that no longer seems to do the trick here. Here's some info about my machine:
HP Envy 15
lspci
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Richland [Radeon HD 8650G]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
[Code] ....
I don't know why they are listed as microsoft basic data.
View 9 Replies
View Related
Oct 21, 2010
I decided to swap my media center PC over to Kubuntu after I had some issues with the Ubuntu 10.04 to 10.10 update. It has had Ubuntu on it for probably 3 years now. Most notably, the same issue is occuring now with any installer later than 9.04 which leads me to believe it is all Grub2 related.
The install runs without errors, but after booting from HD I get only a blinking insertion cursor. No Grub at all. I've held in shift, nada. I booted to Live CD and reinstalled Grub manually but still no love. It acts as though Grub simply isn't there.
I do have a second hard drive in the box that has Ubuntu 9.04 on it that I use as a backup if the OS HD gets messed up, but it is second in boot order and shouldn't be causing an issue. Besides, if that HD was booting it would be giving me legacy grub, not a blinking cursor.
View 4 Replies
View Related
May 1, 2010
I have a single XP install on another partition, but can't boot to it now that I have upgraded to 10.04. Also, when starting Ubuntu, it takes a good 30 seconds to actually start booting ubuntu after I have selected it from the GRUB list (just sits there with a blinking cursor)
Noticed other users have been directed to run the boot info script, so here are the results from that.
Quote:
View 3 Replies
View Related
Jun 5, 2011
I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).
View 8 Replies
View Related
May 9, 2010
I just installed 10.04 and for some reason once the grub screen loads and I can pick what I want to launch (regular kernel, or rescue mode), it attempts to load and then I just get a blinking cursor. I've found that I can't load the live CD either unless I use the nomodeset flag. I read in another post that this problem should be fixed by editing the /etc/default/grub file to add the nomodeset flag, which I did via nano. However, the file also says you must run update-grub after you edit the file. I tried this and it said something like it can't find / (is /dev mounted?) The hard drive itself is mounted, so I don't know why /dev wouldn't be mounted. How can I get this problem solved so I can boot to 10.04 successfully from the hard drive? (I'm typing this from the live CD right now).
View 9 Replies
View Related
Mar 11, 2010
I set my drives up with MY boot loader, and I boot several OSes.I installed Ubuntu and told it to place grub on the / drive, which is where I always put it with any other install and it works fine.I find now that despite telling the install where to put it, you guys have taken it upon yourselves to alter the MBR of the volume ANYWAY!
SO, what I need to do is re-install grub, but I see that you also have no repair facility on this disc either. All I want to do is use MY boot loader. Currently, when I point at the / volume it just hangs with a non-blinking cursor in the upper left.No other Linux installs I have performed over the years do this. I want the drive to boot by merely pointing my bootloader at that volume.It always has in the past, so what did you guys change? I want NO action on my MBR, but I DO want a working grub on the actual root volume, which is NOT the first volume on the drive.
View 9 Replies
View Related
Nov 23, 2009
I used the F12 DVD to upgrade my system, before all the NVIDIA warnings were posted. I have a Geforce 7100 (7 series) card and used the rpmfusion drivers on Fedora 11. After the upgrade, I get a blinking cursor at boot time. What I should do to repair the mess.
View 5 Replies
View Related
Aug 28, 2011
I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
View 1 Replies
View Related
Jun 29, 2011
I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:
[code]...
Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?
View 2 Replies
View Related
Jun 6, 2011
I have an Ubuntu server virtual machine running in vmware server on a Win2003 server host. A locked up machine forced a hard reset a couple of days ago and my VM seems to be damaged.At first VMware wouldn't start the VM, complaining of a locked file. I deleted 3 .lckdirectories and was able to start up the VM. I then get a GRUB menu with 6 options - booting any of them other than memtest results in a lone underscore cursor at the upper left corner.me in the right direction as far as the next thing I should try at this point? Unfortunately I had not yet set up a rigorous backup scheme, other than internal daily db/web backups that are stored inside the VM. I have a snapshot from 3 weeks ago but upon loading the snapshot I get the same cursor.
View 1 Replies
View Related
May 3, 2010
I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
View 9 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Mar 9, 2011
I am trying to install any version of ubuntu (I even tried so far another version called jollicloud) but the result is always the same...The computer is a Dell Mini 9. I have pulled out it's SSD because it has broken.I managed to install about some months ago an ubuntu netbook version (10.04, not sure) which all worked fine from a 8GB usb stick Here are my steps:
1. Download ubuntu either netbook or standard version
2. Make a bootable flash with Unetbootin from ubuntu or other programs from windows
3. Put the flash disk and the second 8GB flash to the dell mini 9
4. Boot Ubuntu live from the first flash (sometimes I think I must put the second flash after the boot so it finds only the live version... If I have put both flashes sometimes it won' t boot)
5. install ubuntu to the other flash (to the 8GB flash drive)
6. reboot
and then...only a blinking cursor is appearing to the top left of the screen with nothing else happening...Shift does not do anything.I have some suspicion that there is no Grub at all but I am not sure for this.I am sure there is a way to make it because I ve done it before, but I don't remeber how!
View 3 Replies
View Related
Oct 31, 2013
I installed Debian 7.2.0 (amd64) on a Toshiba Satellite C870D-121 with the graphic installer. It already has Windows 8.1 installed on another partition, and for Debian I'm not using the same partition of course. Actually, the Debian installation is replacing a Ubuntu 13.10 installation that was working fine.
After choosing Debian in the Grub menu, I can see the boot log entries adding and then the screen clears and all I get is a blinking cursor. After a while, some '^@^@^@' symbols appears. Of course I can Ctrl-Alt-F1 to get a virtual Terminal in order to login and try to investigate the problem, but so far I haven't been able to reliably identify the problem.
View 5 Replies
View Related
Apr 20, 2015
I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.
Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core
I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.
How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.
View 9 Replies
View Related
Feb 10, 2011
I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.
Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8
I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.
This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.
The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.
I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.
View 1 Replies
View Related
Jun 22, 2011
I'm unable to boot into my Windows OS so Im trying to install Ubuntu 11.04 on a separate partition, so I can somehow get access to the files on Windows.
I made a live cd and a flash USB, both of which when I try to boot from, will go straight to a blinking cursor and nothing else, it won't allow me to type and there are no error messages. So I can't even get the install started.
I made sure both the cd and flash USB are bootable from another pc from inside Windows.
View 1 Replies
View Related
Oct 6, 2009
i worked on my notebook as usually. The only thing i did with the system was the update. The little screen appeared and I clicked to update everything. After the logoff/logon everything worked fine. But the next morning (yesterday) the system loaded and finished with the blinking cursor on the black screen. the yum.log output is the following (from 4th Oct):
[code]...
i did the system update but it haven`t fixed it.
View 3 Replies
View Related
Feb 22, 2010
Whenever I boot the system after the fedora 12 bubble fills up I see a blank screen with a blinking cursor. Though I am able to access tty2 by pressing alt+ctrl+F2.
I have seen the boot logs and it shows a warning:
Code:
Warning: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/
I have an ATI Radeon 3xxx series card and I have recently installed mesa-dri-drivers.x86_64. I guess the blank screen problem is because xorg for fedora 12 doesn't support these drivers.
I want to remove this package using yum, but when I try to do it using "yum remove" it shows 95 packages that would be uninstalled with it. I don't want to remove those packages as it has some that I use like Konversation.
how do I remove mesa-dri-drivers and what were the drivers that were being used before I installed mesa.
View 7 Replies
View Related
Jul 11, 2011
I am using fedora 15 on my dell studio 1558 . Sometimes a black screen appears with a cursor blinking when i tries to reduce the brightness of the laptop and somethimes it automatically happens . And i am not able to do anything its just like the blue screen of death as in windows . the only way to get back is by restarting the computer
View 8 Replies
View Related
Nov 13, 2010
After installation of Fedora core6, only i can access to Graphical interface(ctrl+alt+F7) only. When i press ctrl+alt+F1 ,F2, etc.only get blank screen alone with blinking cursor. My system configuration is PIII, Intel 810 chipset.
View 1 Replies
View Related
Jun 24, 2010
Problem-PC automatically boots into a black screen with blinking cursor. No message or nothing
I have 4 HD. Primary drive has Windows Vista, Secondary no OS installed. Sata1 HD Ubuntu 10.04, Sata2 Windows 7. Prior to installing windows 7 all was perfect but once I did it, grub got all screwed up. The only way I can boot into grub is if I manually select my Sata1 which has Ubuntu on it and only then it allows me to select Linux or Windows OS. How can I change that so it can boot up normally as before? I'm assuming that grub was installed in the primary drive which has vista on it, but once I installed windows 7 it got deleted and when I tried reinstalling Ubuntu, the grub was not installed in the primary drive.
View 9 Replies
View Related
Jun 4, 2010
I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.
View 9 Replies
View Related
Jan 11, 2010
I am installing Fedora 12 on a VIA pico ITX and am running into some issues.
I had the same board but with an PATA/IDE drive, and on that it installed just fine. I needed a bigger/better drive so I did get an SATA drive for it.
After the install it either freezes/hangs when the post install begins or IF the post install works (when I use ide=nodma) it won't boot. I do get to see the grub screen (if I change the timeout in grub.conf) but as soon as the kernel starts loading it freezes. and I see a black screen with a prett fast blinking cursor.
With the live cd, if I try to boot: it reports, no root available going to sleep.
View 2 Replies
View Related
Jun 11, 2010
just upgraded to Lucid. When booting, I get a blinking cursor on a black screen for 30 sec. Then I get some flashes of text about UDEV. Finally, I get a desktop after about 30 more sec.
Any way to speed this up? I've already tried disabling my nonexistent floppy drive in the bios, but it didn't help.
View 9 Replies
View Related
Sep 23, 2010
I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.
View 9 Replies
View Related
Nov 17, 2010
I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.
View 1 Replies
View Related
Dec 16, 2010
I have an Acer Aspire One AOA110 that came with Windows XP.
I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).
Before install, I was able to run Ubunut from the usb key with no problems.
At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.
View 9 Replies
View Related
