CentOS 5 :: 5.6 Install Blinking Cursor At Boot?

Aug 20, 2011

Im using 5.6 DVD install to a HW raid1 Card (2 x SSDs in raid 1, Arcea Card Natively recognized by centos anaconda).I select to wipe the entire drive and remove ALL partitions (ive also tried setting this to just remove linux partitions). The install location (raid drive) is /dev/sdh the A-G are other 1.5TB drives.I also un-check EVERY drive except the raid drive (sdh). it then asks me if it ok to wipe/reformat drive (Prompts Yes or No, i click yes)Every time i do this install i get the blinking cursor after post. Im told this means i dont have GRUB installed, i do NOT disable grub or anything related to the boot-loader in anaconda installer (all those setting are left at default). ive also tried setting this to NO boot loader, and i get the same result.

This DOES work as i have gotten it to install and run prefect for a few weeks. I think what i did then was removed ALL THE DRIVES except teh raid drive, and then did the install then. This way the install drive was /dev/sdA and all worked, even when i added the drives back online after the install, the machine ran great and booted several times this way (i had to do a os re-install or else i would have left it as is.)YES bios is 100% set to the raid card as the first device to boot from, Centos 6 installed to the same raid drive boots and works great - but i need 5.6.no google help on this one, searched hard, only one article on Ubuntu doing this all the time.also everytime im retrying to install 5.6, i go into the HW raid card's bios and delete and recreate the raid1 volume (it takes about 10 min for it to format and initialize the raid1 array

View 2 Replies


ADVERTISEMENT

OpenSUSE Install :: Blinking Cursor At Boot

May 31, 2011

Today I decided to play with my new 11.4 Opensuse dvd. It installed and booted without any problem, and I didn't face any problem until I rebooted the computer to test my newly installed nvidia graphics drivers. openSuse wouldn't boot. Well, the important side is: there are no kernel panics, no "hit enter to restart computer" to find the reason. Just a blinking cursor after an attempt to find the kernel. I only could get out of that by pressing the reboot button. I decided to press c and boot manually:

Code:
grub> root (hd0,4)
Filesystem type is ext2fs, partition type 0x83
grub> kernel /boot/vmlinuz-2.6.37.1-1.2-default

and the computer just froze. At this stage pressing tab for autocompletion at kernel line freezes the computer, too.

Maybe additional boot parameters?

Well, considering that installation brought me to a desktop, the system seems to be up and ready to run. Nothing seems wrong with my menu.lst:

Code:
title openSUSE 11.4
root (hd0,4)
kernel /boot/vmlinuz-2.6.37.1-1.2-default root=/dev/sda5
initrd /boot/initrd-2.6.37.1-1.2-default
(I did not install a bootloader with openSUSE. This is legacy grub bootloader of Debian)

View 4 Replies View Related

Fedora Installation :: Fresh Install Hangs On Boot / Black Screen Blinking Cursor

Aug 9, 2011

After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).

The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.

View 5 Replies View Related

Ubuntu Installation :: Dell Inspiron 2650 Xubuntu Install Blinking Cursor On Boot?

Jan 22, 2010

I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor

View 2 Replies View Related

Ubuntu :: Slow Boot Time - Boot To Bios And Then The Screen Goes Black With A Blinking Cursor

Oct 14, 2010

I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.

View 7 Replies View Related

Ubuntu :: Lucid Don't Boot - Blinking Cursor

Oct 20, 2010

I have a box with lucid I rarely boot. When I do there is usually some trouble, as now. The only thing that happens is that a blinking cursor appear, and nothing happens. Usually the box also never shutdown, I end up with having to hardboot it.

What causes this, is there anything I can do to fix it? As of now I can't get the beast back up. I'm running x64, a cheap raedon 5xxx card and an amd x4 processor.

View 3 Replies View Related

CentOS 5 :: Reboot Hang - Blank Screen Blinking Cursor?

Aug 19, 2009

This is probably not possible, but just wondering, restarted centos 5.2 remotely, hung at shutdown, kvm'ed to see what was hanging it up, control c'ed and then ctl alt del, just trying to kill the process, was brought back to the login screen, but unable to type anything. Alt-f1 switched to a different virtual console, which was just a blank screen and a blinking cursor, but now able to type things. Want to avoid hard shutdown. Is there anyway to force shutdown/reboot the machine from this console?

View 1 Replies View Related

Ubuntu :: Slow Boot (Blinking Cursor) With 10.04 Upgrade

May 3, 2010

I am getting a much slower boot with the 10.04 upgrade. After choosing which partition to use I get the blinking white cursor in the upper left hand corner and the "Boot from (hd0,4) ext 3..." sits there for a while before coming to the log in screen. There have been quite a few posts about this, a lot of people are saying disabling the floppy drive in the BIOS has worked for them. I don't have a floppy drive on my laptop.

View 9 Replies View Related

Ubuntu Installation :: Blinking Cursor During Boot - Can't Progress?

Feb 10, 2011

I am attempting to install Ubuntu 64Bit Server 10.04 on a new server.

Server Specs:
Xeon E5620
12GB RAM
2X 160GB 7200 RPM in RAID1 (Onboard Software RAID)
Super Micro X8DTI-8

I am doing a typical install with no special functions on a RAID1 onboard Intel array. I know the array works because I tested it by installing Windows Server 2003 which works fine. The RAID also shows as healthy in the BIOS.

This problem is very difficult to remedy because everything seems to install fine with Ubuntu but when you reboot after the install you get a blinking cursor _ and nothing else. It appears that something happened when loading the OS but it's impossible to get past the blinking cursor because you can't type anything or escape out of it. The only thing that it will register is Ctrl+Alt+Del which will restart the server.

The funny thing is it does not display the typical Sigkill and show processes shutting down. The screen goes black and it restarts only to return to the blinking cursor. I am on my 6th attempt at an install with ubuntu and I am seriously considering switching over to windows unless.

I am almost certain this is a RAID issue because I can load the Ubuntu on 1 drive without any issues but I always get the blinking cursor in the RAID.

View 1 Replies View Related

Ubuntu Installation :: Won't Boot / Getting A Blinking Cursor, But No GRUB?

Jun 5, 2011

I've tried to install Ubuntu 11.04 for the whole afternoon and I'm stuck.Reason why I use the alternate cd is that I want to use an encrypted logical volume (full system, not just home folder). I did not create the partitions myself, I simply used the installer option for "guided LVM with encryption".But now I have the problem that I finished the installation without error, but when I boot my laptop nothing happens. I do only get a blinking cursor, but no GRUB, which I installed too (because there is a nother hdd with win 7).

View 8 Replies View Related

General :: Can't Boot OS From USB Drive / Showing Black Screen With Blinking Cursor

Mar 8, 2011

I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.

I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.

View 1 Replies View Related

Ubuntu :: GRUB - Boot Windows Goes To A Black Screen With A Blinking Cursor

May 3, 2010

I dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.

I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.

View 9 Replies View Related

Ubuntu Installation :: USB Drive Boot - Blank Page With Blinking Cursor

Nov 17, 2010

I downloaded the OS I wished to use, loaded it onto a clean 4.0GB drive, everything went as planned. But then I rebooted, and it never booted the file off of the USB. So, I changed the boot options, and tried it again. Now, every time I boot with the drive in, it goes normally and then opens a blank page with only one line of text detailing the date of copyright, something about Linux, etc... And a blinking cursor. Is this normal and I just have to wait for it to load, or is something not being processed? Any information you guys need I can obtain, I'm not new to computers but I am new to changing OS's.

View 1 Replies View Related

Ubuntu Installation :: Dual Boot With Xp - Ntldr As Primary - Blinking Cursor

Dec 27, 2010

Six months ago I installed Ubuntu 10.04 to my otherwise Win XP work laptop. I decided to continue to use Windows' boot loader as primary: I told the Ubuntu installer to put grub2 onto a separate partition, then used dd to copy the first 512 bytes into a file in my Windows C partition, then edited boot.ini to link to it - its a common technique that is described in many support forums and blogs. This worked fine, and continued to work until a few weeks ago. One day I chose the Ubuntu option at the Windows boot loader and got a blinking cursor at top left of screen and no grub2 menu. I was able to use SuperGrub2Disk to discover and boot from my grub2 install - so that didn't appear to be broken. I finally fixed it by dd'ing a fresh copy of the first 512 bytes of my /boot partition over to the Windows C partition. So somehow the Windows boot loader decided it no longer liked my original dd'ed file.

The only things I can think of that might have changed and caused this to happen are (on Ubuntu) an update to security packages using the graphical update manager that pops up (I rarely do a command line apt-get upgrade/dist-upgrade and certainly not in this time frame) and (on Windows) a Windows Update - as it is a work laptop I tend to take whatever essential updates it suggests. As you can see I managed to fix the problem. However does anybody have any similar experience or any explanation why this may have happened? Could an over-zealous Windows Update have caused it?

View 4 Replies View Related

Ubuntu Installation :: After Upgrading 10.04 To 10.10 System Doesn't Boot (only Blinking Cursor)

Feb 1, 2011

I tried to upgrade to Maverick (server version) usingsudo do-release-upgradeAll went well, but on the first reboot after the installation the PC hangs with grub prompt:error: the symbol grub_xputs not foundI guess it has something to do with my RAID1 setup:sda1/sdb1..RAID1, bootable (system partition, 20 GB)sdc1 ....swap partition sda2/sdb2/sdc2 ... RAID5 (data partition, 3 TB)I made a bootable (using UNetbootin) USB pen drive with 10.10 desktop on it and booted into this desktop version. Aftermdadm --assemble --scanI could successfully access (and mount) my RAID1 and RAID5 drives. However, the system itself does not boot.

after only having mounted /dev/md0 and browsed in the contents, the boot behavior has changed: now the PC does not end up in the grub prompt "the symbol grub_xputs not found", but instead a blank black screen with a blinking cursor left top is shown. Keyboard: no reaction (I tried Enter, Esc, any keys ... no reaction, just a blinking cursor).Then, I tried:

boot into USB pen drive 10.10 desktop
mdadm --assemble --scan ... result: /dev/md0 is available (the RAID1 of sda1 and sdb1)
mount /dev/md0 /mnt/md0

[code]...

View 8 Replies View Related

Ubuntu :: 9.10 Install Disk - Cursor Appear Blinking

Apr 2, 2010

I put the ubuntu 9.10 disk to install it I wait a long time then at the left upper corner a cursor appears blinking then I wait more then nothing happens.

View 3 Replies View Related

Ubuntu Installation :: Acer Aspire One - 10.4 Doesn't Boot, But Shows Blinking Cursor?

May 25, 2010

Similar problems to mine have popped up elsewhere, but none of the fixes seem to work (or I'm just too stupid). I tried to see what the people at Canonical and elsewhere came up with for Ubuntu 10.4 and, after the live USB checked out fine, I rather foolishly installed the OS on my Acer Aspire One D250 (1GB RAM), to run alongside Windows XP.

It booted up once, I think, and then no more. I believe the problem MIGHT be the Broadcom WiFi stuff, but I'm not sure. Anyway, booting Ubuntu leads to a blank screen with a blinking cursor... which doesn't appear to go away. Recovery mode worked once or twice (had to use ACPI=OFF at least once), then no more. It leads to the same thing: that perpetually blinking cursor.

What I would like is either a fix to get Ubuntu 10.4 launched, or some way to remove the OS and restore my netbook back to what it was. Unfortunately, the MBR fixes that are posted all over cyberspace are useless, as my hidden partition doesn't contain the rtmbr.bin file it needs to work (don't ask me why--I've already posted that question at the AAO user forum). So it seems a fix to launch Ubuntu is the only solution, so that I can at least set grub to launch Windows XP rather than Ubuntu.

View 2 Replies View Related

Debian Installation :: Failed Install On HP / Blinking Cursor

Apr 20, 2015

I've been tooling around in linux on and off since I discovered KNOPPIX 3.2. No linux distro has ever been a daily driver for me, though I wish sometimes it were.I've tried many distros over the past couple weeks via virtualBox on my mac and decided to install Debian on my laptop. I've tried multiple times and it has always failed; quite disappointing.

Laptop Specs;
HP Pavilion dv7 3169wm
64 bit AMD Turion II Ultra M620 2.50 GHz Dual-core

I started the install via the live ISO as the netinst & the DVD versions both failed, either by no suitable kernel or just flat out "installing base system failed". I've now found my computer to boot past the POST splash screen , and then to a black screen with a line cursor blinking with no input/output ability.To be clear, I did use uNetBootin to create the USB, and have successfully installed, and used multiple other distros (ubuntuMate, mint, peppermint, Arch, elementary) without issue, or at least nothing I couldn't fix.

How can I get past this and attempt to install Debian? I'd put my linux knowledge at a "beginner" stat, but I'm by no means daft about electronics and computers.

View 9 Replies View Related

Fedora Installation :: Blinking Cursor When Booting Install CD?

Aug 28, 2011

I am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.

I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.

View 1 Replies View Related

Ubuntu :: New Install Black Screen After Blinking Cursor?

Oct 25, 2010

just did a dual boot install on a brand new DEll T1500. The machine has win7 on it. I booted off the live CD and all looked well. Installation went well. When I reboot, I get grub, select the top linux option and then see a small black blinking cursor for a few seconds, then nothing. The screen reports no signal.

View 8 Replies View Related

Ubuntu / Apple :: Blinking Cursor Without Option To Install?

May 5, 2011

I have a MacBookPro5,2 with WinXP and Mac 10.6.7 installed. I created a new partition, and installed refit. I burned Ubuntu 11.04 32bit, rebooted, held 'c' and it started the boot process via the CD. It makes it to a brief Ubuntu image but changes the the blinking cursor and doesn't change. I see no menus and have no options except to be sad and reboot.

How should I proceed debugging this? Simply running Ubuntu via 'LiveCD' would be nice, as would being able to install Ubuntu. Should I try an alternative version of Ubuntu?

View 2 Replies View Related

Fedora Installation :: Fresh Install - Blinking Cursor Appears

Jun 29, 2011

I have just installed Fedora 15. I have tried both the desktop edition and the LXDE Spin on an AMD X2 64 5800+. It's hard-drive so I select "Use All Space", meaning all the partitions will be removed and recreated. The installation completes normally, when I reboot without the CD, I get the screen with blinking cursor same as [URL]... Adding intel_iommu=off to the grub.conf did not help. I presume the default installer works correctly however the installed boot configuration puzzles me. The boot partition is /dev/sda1 and the mount point is /boot. If boot from the cd after the installation, I mount:

[code]...

Is this how it should be? This is me being new to Linux probably, but I should /boot contain the boot information if that's where the boot partition is mounted? Is there any way to "turn on debugging" so I can get a better insight on what's not happening?

View 2 Replies View Related

Ubuntu / Apple :: Clean Install Of 10.04 Boots To Blinking Cursor?

May 3, 2010

I have just installed Xubuntu 10.04, on my Mac pro. I have OS X snow leopard on one hard drive (sd1), and I put lucid on another hard drive (sd2) (both SATA). The installation went perfectly.

The issue is that I cannot boot Ubuntu, the screen briefly flashes some colors, and then displays a blinking cursor. The screen is unresponsive to the keyboard, at this point I have to restart the computer.

My assumption is that there is a problem with my NVidia card and the drivers, but I am not even sure that grub loads as I cannot see anything until the blinking cursor comes up. Is there a way that I can boot into safe mode, and then install the proper video drivers? I must use OS X for the moment.

View 9 Replies View Related

Ubuntu Installation :: 10.4 LTS Blank Screen With Cursor Blinking After Install?

Jun 4, 2010

I have installed today Ubuntu 10.4 LTS ..after installation the OS does not boot and just shows blank screen with cursor blinking ...any idea ..I have searched the forum a lot but cannot understand why this is happening ..re-installed twice ..This is AMD64 bit but I am installing the 32 bit ubuntu 10.4 LTS.

View 9 Replies View Related

Server :: After New Install On HP DL120 G6 - Screen Is Blank With A Blinking Cursor?

Sep 28, 2010

I have reinstalled the OS a couple times now. Not sure what else to check.(noobie)Its on a RAID 1 controller, so I'm wondering if that has something to do with it

View 2 Replies View Related

Ubuntu Installation :: Server Blank Screen + Blinking Cursor After Install?

Sep 23, 2010

I have installed it from usb as the cd installation failed at the point where you decide which type of installation you want (lamp or samba, etc)the installation completed but when booting nothing happens, only a black screen with a blinking cursor. pressing the shift key or any other keys doesn't work.strangely when i boot from the usb flash drive again (and not from the hard drive) the server does boot and asks for the user name and password!i have chosen the guided lvm partition with 20% reserved for system files.my machine is an athlon xp 2GHz (32bit), 1GB, SATA hard drive, nvidia 6600 graphicsmy guess is that its a problem with grub and lvm.

View 9 Replies View Related

Ubuntu Installation :: Getting Black Screen With Blinking Cursor After Install / Sort It?

Dec 16, 2010

I have an Acer Aspire One AOA110 that came with Windows XP.

I created a usb flash drive install for Ubuntu 10.10 netbook edition and went through the install process (wiped disk clean, not a dual boot with WINXP).

Before install, I was able to run Ubunut from the usb key with no problems.

At the end of the install, it told me I needed to restart, so I clicked the "restart" button and the removed the usb drive. Nothing happened and it never restarted and just completley hung for about 20 minutes. I manually shut down the computer by holding the power for 10 seconds and then rebooted the machine. Now all I get after the "acer bios" screen is a black screen with a blinking cursor. If I press any buttons, the computer beeps at me.

View 9 Replies View Related

Ubuntu Installation :: Server Install Fails - Black Screen With Blinking Cursor

Feb 5, 2010

I was going to set up an ubuntu server, but ran into some issues. When I try to install ubuntu server 9.10, it immediately goes to a black screen with a blinking cursor as soon as I press enter on the menu. I've tried pressing F6 and editing options - noapic, nolapic, irqpoll, vga=[something...] and nothing worked. I then downloaded a standard ubuntu desktop cd, and the livecd works, and I can successfully start the install!

I've heard that I should probably use the server install if I want to use this as a server (which I do; webserver for a group of people, website, ftp, ssh.) I've also heard that it's possible to just install everything needed overtop of an ubuntu desktop base. What should I do? Are there other things I should try to make the server install work? Or is it not worth the effort, and I should just go with a desktop install and then work from there? tasksel? (It's a Dell XPS, the graphics card is NVIDIA Geforce 9800 GT).

View 1 Replies View Related

Ubuntu Installation :: After Selecting Install, Blank Screen With Blinking Cursor Appears?

Mar 11, 2011

1) Burned Ubuntu 10.10 to a disk, When tried to install (Select Install Ubuntu) screen goes blank with dim backlight and a blinking cursor on top. Same thing happens with Try Ubuntu without installing.. 2) Tried on Lenovo T410 and Dell 1330. issue exactly remains the same.3) Tried it on a VM Worksation 6.0, "This kernel requires an x86-64 cpu but only detected an i686 error is popping up". So thought its a Ubuntu x32 an compatibility, hence downloading the 64 bit now. Will burn and check it later.

Brand: Lenovo T410
Intel(R) Core(TM) i5 CPU M520 @2.40Ghz
BIOS: A1674IMS Ver 1.0L

[code]...

View 1 Replies View Related

Debian :: Blinking Cursor On Reboot

Apr 2, 2015

I've recently installed Debian 7.8.0 amd64 gnome on my new ASRock Q2900 mobo/cpu combo (It has an embedded Intel J2900)

The system boots fine but I am unable to restart it. If I tell the system to restart I see the mobo splash screen but before I see any mention of grub it gets stuck with a flashing cursor in the top left.

At this point I can hold the power button for 5 seconds and after it shuts down, I can boot it no problem. I can work my way around this issue but there shouldn't be any reason to need to.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved