My ubuntu 10.04 has two monitors connected both being treated as individual desktops.But only one desktop is showing the wifi network icon in the notification area.Is it possible to have more than one wifi icon going at one time?
View 1 RepliesMaybe this isn't the right place, BUT: How can I create an OO Writer template with about 20 input Text Areas? I can make one, and then I thought I could use COPY and PASTE to dupe it in the other places, but it didn't work. I hate to spend all that time creating the other 19 identical boxes.
View 3 Replies View RelatedI was wondering when and/or how to get multiple screens setup and working in unison. Currently I have 3d rendering working but all of my screens work as separate desktops. They all have their own start menu and panel bar. I cannot move a window from screen to screen. I have to open a new window in that screen and then it is stuck on that screen and can not be move any where else. When is this going to be fixed because until it is unfortunately Micro Slop will still have my business. I am a power user and enjoy my 4 screens when they work in unison, not as individuals.
View 3 Replies View RelatedI used to use nvidia and Twinview to drive an LCD and CRT monitor as one big area. I've changed over to using the nv driver, and I gather that xinerama is deprecated now in favour of xrandr. But I can't get xrandr to even report anything about my two displays, and can't get any picture on the CRT. This is despite both being fully detected by X (according to the log file).
I've just changed over from using the nvidia driver to the nv driver. I did this because I discovered that the frequent system crashes while watching video was caused by the nvidia driver, partly because my card is a GeForce FX 5200, not supported by the current nvidia driver which contains bug fixes for the problem. So I've used Synaptic to remove all the nvidia drivers and add-ons, and installed nv and the libgl1-mesa-dri and libgl1-mesa-glx drivers.
I moved my old xorg.conf file aside and on a second X display ran X :1 -configure to generate a clean new xorg.conf and started from there. I'm doing all these experiments by modifying xorg.conf, and then on a second console running up X on display :1 to try it out. Another odd thing: xrandr doesn't report any "outputs" (since I'm using the nv driver, I'd expect to see DVI0 and VGA1), instead it just reports this:
Code:
# xrandr
Screen 0: minimum 640 x 200, current 2560 x 1024, maximum 2560 x 1024
default connected 2560x1024+0+0 0mm x 0mm
[code]....
I have Nvidia Quadro NVS 440 with four 1280x1024 LCD monitors and Ive tried to upgrade Kubuntu from 9.10 to 10.04. Everything works well at 9.10. After upgrade, system is hanging and I cannot reach desktops in all monitors. Ive tried to reconfigure x server using Nvidia-settings control panel. This doesn�t work. So i tried to reinstall system from CD, because there should be something wrong with the upgrade, but the problem persist. Ive tried to reinstall with Ubuntu, but there is same problem.
My configuration of screens are: Screen 3 left of Screen 0, Screen 0, Screen 1 above Screen 0 and Screen 2 right of Screen 1, separate X screens and Xinerama enabled. Sometimes, if i reach upper edge of Screen 0, mouse will continue at the lower edge of screen 0. Screen 3 is not reachable and If I try to move mouse to it, system will hang and x server is automaticaly restarted. Ive tried to configure all screens with absolute positioning too, but this doesnt work either. My only option now is downgrade to 9.10 .
This happen on a samsung NC10 (graphic chip: Intel 945GME). When I boot linux + gnome3 and no external screen is attached to my laptop, then, gnome 3 boots with the gnome shell (gnome 3 shell). If, at this stage (when logged in), I plug an external monitor to the laptop (and configure it using the monitor config tool), then I can run gnome 3 shell on my external monitor as well... BUT:
If I log in when the external screen is already plugged in, then gnome boots in fallback mode... with other words: Gnome3 seems to be able to run the graphic+screen with gnome 3, but the "fallback" detection seems not to beleive so...
After the installation I have 3 screens setup, on DVI, HDMI (to DVI) and DisplayPort this is using and AMD HD5570 video card. With this configuration mirrored everything is fine and I can see all three displays.However having 3 copies of the same display is worthless, so I want a separate desktop per display.This is when everything goes wrong, after making the change to have 3 displays it fails to work, ie it crashes with the message below (full log is attached as well)Now I can use any 2 monitors independently with the third one mirrored, but I can not have 3 independent monitors configured on the card without X crashing. The exact same config, did work fine in Windows (where I verified the setup).
Backtrace:
[ 352.624] 0: /usr/bin/X (xorg_backtrace+0x26) [0x4a2626]
[ 352.624] 1: /usr/bin/X (0x400000+0x6219a) [0x46219a]
[code]....
get multiple screens working in Xorg with the Intel driver? I can manage to get Dual Head working (one big screen), but I'm interested in having two seperate X sessions (two screens) instead.
View 1 Replies View RelatedToday my cursor became distorted. It worked fine on the second screen, connected to my notebook and screenshots displayed it well. So I did a little googling, and found out, that it is a known bug. I followed different tutorials. And now my cursor is blinking and disappearing. And it drives me crazy. It was a lot better when it was distorted. My xorg.conf:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "Configured Screen Device" 0 0
Screen "amdcccle-Screen[2]-0" RightOf "Configured Screen Device"
[Code]...
The 'Multiple Screens' tool, aka grandr, is very handy for setting up my dual monitors. But restarting my system restores the monitor setup to the (crummy) default settings. Is there a way to save these settings and make sure they are always applied when the OS boots? Putting these settings in my xorg.conf would be fine, but I'm not sure where or in what form the settings generated by grandr might be located, or if they're at all xorg.conf compatible.
View 2 Replies View RelatedI have an Acer Aspire 4730Z laptop running Edubuntu 10.10 (32 bit, clean install). My problem is with the boot process. After boot and everything seems working properly, I will get the ?black screen of death? followed by the log in screen. Unfortunately, the display is made up of nothing but horizontal and vertical lines, leaving noting recognizable. I have to do a hard restart. I have to go through this process 2-4 times before I am up and running. The ?black screen of death? occurs right after I load any program
View 3 Replies View RelatedWe are working on a project to create a display wall of 8 monitors arranged as 2 high by 4 wide. Each monitor is connected to a single machine and all machines are networked with a master machine with its own, seperate monitor.
Our goal is to get the 8 machines to share a single desktop, with the master machine acting as the server. We have looked at using Xinerama or NMM, but we are unsure about how to get started configuring the multi-machine, multi-head display.
I'm using Ubuntu 10. I want to apply different themes for desktops.. I want to apply windows 7 theme,ubuntu, mac os themes for my multiple desktops
View 1 Replies View Relatedhave a large amount of 7z files in multiple folders which I need to extract.The directory structure is like this:
/main-folder/
multiple subfolders/
1 or more 7z files per subfolder
I would like to get the output of this action in one separate folder, all together in 1 folder.How can I do this?
I often use the rpl command to make changes to multiple html files at once. For example:
rpl -R '<br />' '<br /><br />' mydirectory However, I haven't been able to figure out how to change multiple lines. For example, let's say I want to change all occurrences of :
<br />
<br />
to:
<br />
I've tried
rpl -R '<br />
<br />' '<br />' mydirectory
but that didn't work. how to do this with rpl or some other way?
I'm trying to connect one computer to two others in an ad-hoc infrastructure.
[computer 1] ---- [computer 2] ---- [computer 3]
computer 2 is running Linux and has a single NIC wlan0. I want to it to connect to both computer 1 and computer 3 so each computer can talk to the other. No switch is available so it needs to be an ad-hoc setup.
[Code]...
I am to rename all the files within a directory (which contains multiple subdirectories) recursively without invalid characters.
I tried the coding posted above.
find . -type f -printf '%p
' | while read file; do
oldfile=$(basename "$file")
newfile=$(echo "$oldfile" | sed 's/[^A-Za-z0-9_.]/_/g')
if [ ! "$newfile" == "$oldfile" ]; then
echo mv "$file" "${file%$oldfile}$newfile"
code....
but I get an error on both of them stating "find: bad option -printf find: [-H | -L] path-list predicate-list"
I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminals in my Linux workstation.Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea).I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example.
My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. All the tutorials I read (like this one) only tells how to use multiple monitors but doesn't answer my question about keyboard shortcuts.Does Linux (Ubuntu 10.04 Lucid Lynx or Debian 5.0.5 Lenny) support this envisioned setup (Different workspaces in a way that keyboard workspace switching only works in the current monitor) ? If so, how?I haven't tested this setup, that's why I'm asking. In this question the user says it works exactly how I want it to behave, can someone else confirm it?
I have an old pentium 3 computer that has ~7 NICs installed. These NICs are attached to modems and other networking equipment. According to the linux ping page on computerhope.com, it seems that one could send a ping from a certain specified NIC. How would one go about this?
View 6 Replies View RelatedI'm looking at setting up a couple automated systems: Here are a few examples:
* Internal accounting system to download and process emails
* Public web server to visit
I could put each system on its own separate box -- for example, it's generally good practice to separate anything that external users have access to (such as a webserver) from internal processes such as accounting. Now, rather than dishing out the money for two separate servers, could I get away with just installing new instances of VMWare on the same box for each system?
To give you an idea, these are not large scale computationally sensitive systems. The accounting one is simply downloading and tallying emails, and the latter is just a webserver with maybe 5 hits per day on a good day. I could definitely pick up a new box for say $50, but I wanted to know the general practice of using VMWare on the same box versus two separate boxes.
How to search multiple words in multiple lines, inside a directory including sub-directory? Pls. give easy example. I want to search the files (in /xx folder and all subfolders) that have header.h included and used x() function. I tried $grep -r "header.h" | grep -r "x(" /Folder/subfolder/ > search.log
View 7 Replies View RelatedI have a CentOS 5.3 box with three network interfaces in it. Each interface is attached to a separate VLAN and I want traffic to stay on each network segment.What I can�t figure out is why I cannot get each interface to have its own gateway and everything gets sent through the default gateway.The basically takes my possible 3Gb total bandwidth and throws it down a single 1Gb pipe.Then on top of that, if I take down the interface (ifdown) that has the current default gateway,I loose contact to the other two interfaces.When I look at the routes, each one of the interfaces shows the gw as 0.0.0.0 and defers to the default route. So I delete the route and try to add a new route with:
[root@testsan ~]# ip route add 10.1.15.0/24 via 10.1.15.1 dev eth2
but end up with the error:
RTNETLINK answers: Network is unreachable
[root@testsan sysconfig]# cat network
NETWORKING=yes
NETWORKING_IPV6=no[code].....
So essentially, I have 3 monitors and i'm attempting to run 2 different window managers/sessions at once split up on the monitors. It is intended to be like this:
Code:
[GNOME/Compiz - Screen0]
- Left Monitor[code]......
When i start my Ubuntu it doesnt go directly into xserver/desktop mode. This is because my machine is very slow. Therefor i exclusivly use the terminal. I only hate the fact that there is only one terminal and i cant switch between them. ctrl-shift-F2 doesnt work. How can i use multiple terminals before having logged into X?
View 3 Replies View RelatedI need the following:Running XAMMP on Ubuntu server with one NIC.Only the webserver has to be available on multiple IP addresses.What i have is 4 devices who communicate with server database servers.
Device 1 = Mysql on IP 192.168.0.100
Device 2 = Mysql on IP 192.168.0.101
Device 3 = Mysql on IP 192.168.0.102
[code]...
I was looking for a solution to watch HDTV quality videos on multiple tv's. I have a cable run and cat5 run to each room and wanted a way to watch hidef movies in each room preferably synced. After much searching I'm coming to the conclusion that this will be hard and expensive no matter which route I want to go. I'm thinking my best route is to build a media converter and pipe that to each room.
I found a couple of HDMI input cards [URL] and [URL] that work in linux. Great with one of those I can get it to a computer signal and even get it on standard coax using a VGA2RCA converter and 1/8 inch to rca for audio hooked up to an old vcr set to channel 3 or 4. And for TV's that support hidef I can hook up computers at each to receive the video over gig ethernet.
So the question becomes what is a good app for sending and what is a good app for receiving. Is gig ethernet fast enough for 1080i? what about 1080p? Comcast has multiple hdtv channels over their coax; so how is it so hard to even encode one channel to an hdtv signal to watch on tv. Is there a way to encode the video to hdtv over the coax like comcast? So I can use the tv itself to watch the hdtv broadcast from my computer over the coax?
So I have a few old dell computers. I want to use them to set up a ubuntu linux server in my basement. Is there a way for me to set up the server over all the pcs so that I can use the processing power of them all together for the server. What would be the best way for me to set a server up with these machines.
View 2 Replies View RelatedWell first I'll give you some background info. I have Ubuntu 10.10 x64 8 gigs of ram AMD 64 X2 Dual Core Processor 5000+ ATI graphics card I just installed Ubuntu on my second HDD yesterday and am using my BIOS to switch between the OSes (basically just staying in Ubuntu in other words. I have had no issues installing Ubuntu what-so-ever.
Heres where my issues come in. Firstly every time I restart my computer it doesn't allow my bluetooth devices (mouse + keyboard. Both made by mircosoft. Dongle is a microsoft product as well) to connect right away. I have to go into the BT settings and click "Make my computer visible" (or something to that effect). After I do this (all on my wired keyboard and mouse) and i hit a button on my keyboard and mouse they are then able to operate my computer. Does anyone know how to fix this problem? Another issue that I am having is that my computer WILL NO LONGER recognize the names nor the demintions of either of my monitors (a visio 42 inch connected via HDMI and a acer 22 inch connected via VGA. both going to an ati graphics card). On top of this my computer will not switch the default monitor from my 42 inch to my 22 inch and this is the larger of the two issues in this section due to the fact that I dont always use my TV -> thats usually when I'm watching movies Does anyone know how to fix this problem?
I am extremely new to Ubuntu and Linux as a whole. I have greatly enjoyed the learning experiences that I have had in the past two days. Also I just prefer Ubuntu to windows. Its sleek its fast and its fun to tinker with . If it would not be a problem please explain the reasoning behind any solutions. And PLEASE feel free to ask any questions, Im here to help you help me! Just kidding. If i can ever return the favor just let me know!
I work for a technology company manufacturing PDA's.
We want to setup a test environment of multiple PC configurations (Linux, Mac, Windows - XP, Vista, 7 and both 32 and 64 bit platforms).
I have played with GRUB a little and got that working with Windows XP Pro for dual boot options on Ubuntu.
I am wondering if it is possible to setup more operating systems on the 1 computer hardware (could install more hard drives if required) with GRUB. Not sure if PC hardware can take installs of both 32 and 64 bit platforms or not.
Or is it better to have 1 PC for each OS? What are the advantages of that? Obvious disadvantage is cost of hardware.
Or is it better to setup VirtualBox for this sort of environment?
Is it possible to have more that on gcc and g++ on a system. Then one application want to choose 3.4 and the other want to use 4.4
View 4 Replies View Related