General :: How To Check Control-M Configuration
Mar 18, 2011Can anyone tell me how to check control-M configuration
View 1 Replies
ADVERTISEMENT
General :: Which Version Control Should Use For Configuration Files
May 8, 2010I want to store some of my configuration files (~/.emacs.d/, .Xdefaults, etc. linux $HOME stuff) in version control so I can easily sync them with my notebook/workplace and see my past changes and revert to them should the need arise.
So far it seems to me that there are quite some people using git for this and I think that I too want to use a distributed vcs for this (if only to get more used to them) but I can't say that I am very experienced with all things dvcs. I did use darcs and git briefly and so far I can say that I really like the way git handles branches, and I think the possibility to have different branches within the same directory is especially useful for my use case. Darcs on the other hand has cherry picking of patches, which too is quite the convenient feature when managing configuration files (at least I assume it is).
So, what would you recommend to use? And what would be your reasoning for your recommendation? What other vcs with nice feature that I haven't mentioned exist and would make a good vcs to store configuration files and why?
General :: Bios Configuration And Check USB Setting?
Feb 19, 2011How can I Bios configuration and check USB setting?
View 7 Replies View RelatedUbuntu :: Startup Disk Check Frequency - GUI Control?
Dec 17, 2010I had it in mind that Ubuntu ran disk checks every 30 boots, but mine are more frequent - running between 10 & 25, which is an irritation. Records show checks after: 12-21-10-20-10-20-13-25-16-21 boots. Should I worry about either the frequency or the variability? I found threads suggesting how to change the frequency using tune2fs, so I suppose I can try that to stretch the interval to maybe 50 or weekly? Will it have any effect, since there is so much variation already? Is there a GUI for setting this frequency, instead of fiddling in terminal?
View 2 Replies View RelatedDebian Configuration :: How To Control My PC's Fan
Aug 25, 2010I've got a PC with a really noisy fan and suspect that most of the time my PC isn't warm enough to need it. I'm using xfce as my desktop, is it possible to do some sort of hddtemp thing and just have my fan come on when it is needed?
View 4 Replies View RelatedDebian Configuration :: How To Control Access To Different Services
Dec 25, 2010I'm trying to control access to different services on an Debian server using /etc/group. So that a user I create for FTP usage doesn't fill up my server with IMAP folders or samba garbage.
Services like proftpd have:
AllowGroup ftpgroup
sshd have
AllowGroups sshgroup
And samba have
valid users = @smbgroup
But I can't find the correct option in Dovecot (/etc/dovecot/dovecot.conf) Do anyone have the magic option or a workaround thats doesn't envolve maintaining seperate user databases and password?
Debian Configuration :: Xscreensaver Cannot Control The Screen
Dec 29, 2010For some reason I cannot figure out, xscreensaver does not have permission to control my screen. It's present in memory, so the settings app thinking it is not present and asking if I want to start it is odd. Could the the necessity of using VESA BIOS controls to get around bugs in the VIA/S3/Unichrome chipset be the source of the problem? Are there other Linux screensavers that might work differently and might still be able to blank my screen?
View 4 Replies View RelatedDebian Configuration :: Jessie Missing Fan Control / Sensor
Apr 27, 2016My laptop fan sensor shows fine in psensor in sid. But today I downgrade to jessie and sensor for fan gone. I check if fancontrol is running but I can not manage to make it work
sensors
Code: Select allacpitz-virtual-0
Adapter: Virtual device
temp1: +55.0°C (crit = +108.0°C)
coretemp-isa-0000
Adapter: ISA adapter
Physical id 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 0: +55.0°C (high = +87.0°C, crit = +105.0°C)
Core 1: +54.0°C (high = +87.0°C, crit = +105.0°C)
[Code] ....
I google and have tried but no luck
Code: Select allacpi_enforce_resources=lax
This is an Asus laptop with controllable fan. I am not sure if fan is running by Bios, and how it might run. But I feel the laptop seem quieter and at higher temperature than it was under sid.
Debian Configuration :: Control The Display Color Quality?
Dec 7, 2010how do we control the display color quality in Debian, similar to setting 16 bit or 32 bit in Windows? I have Lenny on a notebook and Squeeze on a netbook, but cannot find a menu to set it. They both have the default vesa driver.
View 4 Replies View RelatedDebian Configuration :: How To Swap CapsLock & Control Keys
May 14, 2011On my Debian machine I have no InterNet connection.
Hardware: --
HP Pavilion DV8000 laptop,
-- 2GHz AMD Turion CPU,
-- 4 gb ram,
-- 150 gb hd,
-- (non-working non-free) BroadCom BMC-4318 wireless chip
OS:
-- Debian 6.0.1a, "Squeeeeeeeze"
-- KDE (soon to be replaced with LXDE, much sweeter and cooler apps).
Here's da problem...(thanks to stinky 1983 Macro$haft & IBM collusion to wipeout WordStar), how do I swap CapsLock & Control keys?Its gotta work in both terminal & X apps
Debian Configuration :: Making Server Acessible For Remote Control From Web
Sep 30, 2010I've gotten VNC setup and working well on our LAN. The next step we want to do is making it acessible from the web, so we can remotely do things with the office files.Unfortunately, I have no idea how to go about this.Our current setup is a router which connects to the phone line, and into which other devices are connected. We're in one room of a big office building which may complicate matters somewhat.Can anyone provide a bit of general info on this topic. Give me somewhere to start ?Ultimately we want to be able to connect to the vnc port from anywhere in the world.
View 6 Replies View RelatedUbuntu Installation :: Check The Configuration Of A Self-installed Package?
Jan 22, 2011I'd love to know how to check the original configuration of a self-installed package? For example, I would like to install the package XXXXX. I did:
./configure
make
make install
After the installation, I would like to know what the configuration I used for XXXXX's installation. Maybe some dependencies (for example, A,B,C...) were not found so that XXXXX was installed without depending on A,B,C.... However, now, I would like XXXXX depend on A,B,C... How to check whether the current installed XXXXX's original configuration?
Server :: Cannot Load Mcrypt Extension. Please Check PHP Configuration?
Nov 23, 2010i have centos 5 running with apache, mysql, php and phpmyadmin. phpadmin is working well but it is showing the following error on the page:- Cannot load mcrypt extension. Please check your PHP configuration.i just try to install mcrypt but it is asking for required dependencies libmcrypt.
View 1 Replies View RelatedDebian Configuration :: System Does Filesystem Check On Every Boot After Upgrade
Jul 5, 2015A few days ago I upgraded my debian sid system, and since then systemd does a filesystem check on every boot which takes over two minutes, disobeying the existing settings I had. How can I set systemd to do a filesystem check only once every a set number of mounts, like I had set up before the upgrade?
View 5 Replies View RelatedDebian Configuration :: How To Check Version Of Loaded Intel Microcode
May 2, 2010Because the version of the microcode installed by the package intel-microcode in Testing (2009-03-30) is way older than the one currently offered by Intel (2010-02-09), I only installed the package microcode.ctl and let it fetch the microcode. However, after reading the Read Me files, manual pages and system logs, and checking the directory where the microcode is stored, I have not been able to find an option to check the version of the microcode in use.
This is the output of update-intel-microcode:
Local version:
Remote version:
could not extract the actual data of remote microcode
Debian Configuration :: Check Battery Levels Command Line?
Feb 12, 2011since I am on a Dell inspiron 1545 laptop, being able to display my battery charge is critical. After some extensive googling, I found I need a command 'acpi', which does not exist on my computer. I cannot seem to find it in the packages database; the closest thing being 'acpi-support' apt-get install also can't find it.
I tried cat /proc/acpi/battery/BAT0/state, but that only shows me if the battery is discharging or charging and doesn't give me an actual percentage.
Software :: ERROR - Restart Aborted Check Your Nagios Configuration
Mar 23, 2011Heare i come with Nagios Problem, When ever i stop nagios it say's
[root@x292 ~]# service nagios stop
Stopping nagios: No lock file found in /usr/local/nagios/var/nagios.lock
When ever i restart nagios it say's
[root@x292 ~]# service nagios restart
Running configuration check... CONFIG ERROR! Restart aborted. Check your Nagios configuration.
my nagios.cfg file is
# 'Nagios CFG 1'
[Code]...
Debian Configuration :: Cannot Check Battery Status In Jessie ASUS EeeBook X205TA
Jul 22, 2015I use jessie-32bit of kernel 4.1.3 on ASUS EeeBook X205TA. But it doesn't recognize buttery status.Result of my investigation, the incomprehensible ponts is below.
・"acpi -b" outputs no information.
・There is not "battery" directory in /proc/acpi/. (button only exists.)
The following is my system informations.
Code: Select allacpi -V
Adapter 0: on-line
Cooling 0: intel_powerclamp no state information available
Cooling 1: Processor 0 of 10
[code]...
I want to check battery in console and fluxbox Desktop.
Fedora :: Lost Volume Control / Internet And Battery Indicator From Control Panel On F11
Jul 15, 2009I feel little silly asking this, I accidently removed from my gnome panel my internet connection, volume control and battery indicator on F11. how can I add this back. It does not show up in the add to panel menu and the applications do not give you back the default feel.
View 1 Replies View RelatedUbuntu :: Control-c - Control-v - Copy And Paste Functions - Stopped Working
Jan 19, 2011I don't know how this happened, but my keyboard copy and paste functions have stopped working. Oddly enough, I discovered that I can only copy and paste by using the third mouse button. Pressing down on the scroll wheel after highlighting text copies the text, pressing it again pastes it Ican still use the Edit-copy and Edit-paste menu functions.
I'm sure it has something to do with all the tinkering I have been doing with my desktop. I have been experimenting with CompizConfig and Cairo dock, changing my themes and things of this nature.
Ububtu 10.04.1
kernel 2.6.32-27 generic
Hardware :: Control Cpu Fan Speed - No Fan Control With BIOS - Acpi - Lm-sensors
Dec 31, 2010I cannot get any fan information from 'lm-sensors' or 'sensors', I tried to run 'pwmconfig' and got this:
Code:
Code:
But I have no tools to control the fan speed from 'acpi'. in particular '/proc/acpi/fan' is an empty directory.
There are no fan info/controls in BIOS either.
I believe the fans do not work as fast as they should and I am trying to find a way to fix this before the cpu cores are melted down from overheating.
Laptop information: HP Pavilion dv2500t
Code:
Debian :: Sound Not Card Configured - Error 'Volume Control Did Not Find Any Elements And/or Devices To Control" - Driver
Feb 8, 2011Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
OpenSUSE Install :: Not Working Right - Error "There Is A Problem With The Configuration Server (/usr/lib/Gconf-sanity- Check - 2 Exited With Status 256"
Jun 20, 2011Having downloaded 11.4 Gnome, finding it did not install I bought it on DVD from ebay, when trying DVD installation my PC is displaying: There is a problem with the configuration server (/usr/lib/Gconf-sanity- check - 2 exited with status 256, I would like to install this rather then just run it off disk
View 9 Replies View RelatedOpenSUSE Hardware :: Energy-Control Out Of Control?
Dec 20, 2010Since a while,the energy-saver shuts down the screeago,it happens after half an hour,but I didn�t set it up in that orders !It makes menervous,short time away from the comp,and soon the screen is dark!And the screensaver will not appear any more,too.I tried to enlarge the times in the energy-manager,created a new profile,switched off the laptopmode-service,nothing helps!And it seems,if there is no possibility to set one of the profiles up,they can only be changed,deleted or newly created.Is there really no place to force it to the required settings?Under the good old KDE3.5,it was no problem,to get it work like I want it to.My 64-bit system runs under openSUSE 11.3 and KDE 4.4.Is here any salvation for my nerves
View 3 Replies View RelatedSlackware :: Thinkpad T500 Fan Control - Way To Control ?
Jun 2, 2010I have had my thinkpad for just a few short months and, it must be that we are heading into summer, but I am starting to finally run into some overheating issues especially when compiling software for awhile, i.e. kernel.
My question would be, "Is it best to let the built in thermal management take care of the issue, and I just need to know what to tweak, or to put on a script solution such as the tp-fancontrol script?
The computer takes about 5-10 minutes to overheat and the message I get in /var/log/messages is "logger: ACPI group thermal_zone / action THM1 is not defined" then it shuts down.
So, any pointers in the right direction would be appreciated.
I am running slackware-current x86_64 on a Lenovo Thinkpad T500.
Debian :: Migration Check List - To Check - Prepare Or Reconfigure
Feb 3, 2010I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
Programming :: Check Menu & Check List In Utility Dialog?
Aug 19, 2010I want to put check menu & check list in utility dialog.i dont know how i do this
View 1 Replies View RelatedDebian Configuration :: "Squeeze" - Trigger "Check Disk" During Boot (before Filesystem Is Mounted)?
Nov 20, 2010as far as i know Debian "Squeeze" has a disk check utility, but you can't run this on a mounted filesystem. Is there a way to trigger this during boot (before filesystem is mounted) ? I can run this once a month to keep filesystem healthy....
View 2 Replies View RelatedUbuntu :: Mikrotik - Control Access To Bind Mac Address With Ip Address And Control The Band Width For Individual Connection
Feb 14, 2011i have a xeon machine with ubuntu os machine specification is 3gb RAM 3 scsi hard drives each 73gb it have two ethernet cards one ethernet card is connected with adsl modem and the second is connected with LAN. now what is mikrotik doing for me is control access to bind mac adress with ip adress and control the band width for induvisual conection.
View 2 Replies View RelatedGeneral :: What Is The Configuration Of Wind River - Can't Find The Configuration File
Feb 22, 2011I want to see what is the configuration of my Wind River Linux (actually I want to see what modules are installed in it when it was built). I can't find the configuration file.
View 14 Replies View Related