What bash command can I use to rename or change the extension or name of a batch of files (for example, from .php to .html)?
Furthermore, is there a simple bash or python script/command that can be used to open a batch of plain text files one-by-one, search for all instances of a specific word, and replace all of those instances with another word?
Until now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
I have thousands of files in hundreds of sub-directories that need renaming. The files I need to rename all look as below:
Note the .ogg.mp3.
been_all_around_this_world.ogg.mp3
I want to remove the .ogg from the files, so in this one case it would end up renamed looking like this:
been_all_around_this_world.mp3
I'm trying to write a script to process some images and rename them, or more specifically, renumber them so that pg_0001.png becomes pg_0.png, pg_0002.png becomes pg_1.png, etc. I've looked at the rename command and sed, but I'm not really very familiar with these. It should also be part of a bash script that I've written for the processing of these files - this is what I have so far:
Code:
#!/bin/bash
pdftk 2012 theatre Sep 2009.pdf burst
[code]...
bash script to give sensible names to a large number of photos. I hope to be able to run a script with an argument which will become the filename followed by a number beginning at 1.
Code:
./file_rename.sh Summer2009_
Summer2009_0001
Summer2009_0002
Summer2009_0003
[Code]....
I named a number of files with spaces in them, and I want to replace the space with "_". However, every time I write a command in the shell with the file name (eg "Spring 2011"), the shell doesn't recognize the file or directory. What can I do about this? Is there any way to use the unicode character for a space?
View 5 Replies View RelatedI'm pretty new to bash scripting, but I really want to wrap my head around it.What I'm trying to do is: From directory "A": Go in to all subdirectories and rename all files within icrementally according to the directory name. SO:
|-- Varian
| |-- FB1-page132.pdf.png
| |-- FB1-page133.pdf.png
[code]...
I have scowered the internet for the answer to this one. I need a script to rename multiple files to the same exact name, run a program on the file then do the same for the next file. We have a unix backend system that is expecting to load the file with the filename of cards.in So I will have files named card.2009xxx, like i said i will have around 4 or five of those. I want the script to rename card.2009xxx to cards.in, run our unix program on cards.in which inturn changes the file name and once complete i want the script to rename the next cards.2009 to "cards.in"Until there are no more left in the directory and the unix program has processed all the files. All of this is occurring in the same directory. I have written some scripts but they fail by moving for example cards.200901 to cards.in then immediately moving cards.200902 to cards.in and that is not good because it is overwriting valuable data
View 10 Replies View Relatedi have lots of files with dots insde file name for example:
document.1.is.bigger.doc
resume.version12.doc
10.photo.www.cnn.com.jpg
i want to rename all files in that directory to be the same (with same extention) but convert dots to underscore "_"
how can i do that on bash script / php.
I'm writing a bash shell script that among various other things will traverse through a directory with hundreds of files and rename those who match a pattern found in a config file. It's expected that only about one in ten files will actually match, and those who don't, will simply just be ignored for this purpose.
This should for instance cause the file "dBase program file December 1987.prg" to be renamed "Clipper source code December 1987.prg", and conversely "C++ source August 1996.cpp" to be renamed "C source code August 1996.cpp" etc.A sample file such as "Random Data File.dat" should not be renamed here since it's not mentioned in the config file..What is the quickest, most elegant way to do this in bash?I am thinking of using bash's built-in regex matching combined with the /bin/rename utility, but don't quite know how to get started to catch this..I guess there are plenty ways of doing this in perl and elsewhere as well, but since this has to integrate into a pre-existing bash script, that's what I'm looking for.Anyone out there with a spare moment to offer a hint in the right direction?
How would I rename all files with a leading decimal point recursivley? I some how got all my music files to have a decimal point.I tried the below and got a " sed argument to long".[CODE]find /media/MUSIC -type f -name "*.wma" | xargs -0 sed -i 's/.(.*)/1/'[CODE]
Another question, can i just use -type f with out -name ? I am sure that all the files got the decimal point added as the first character.
I am trying to write a bash script that will extract a .cbr (.rar) file, traverse the extracted files in alphabetical order and rename them 001.JPG, 002.JPG, 003.JPG, etc.So far I only have this much to extract it:
Code:
#!/bin/bash
#
[code]....
This is a really odd bug I can't seem to figure it out. Basically, commands like ls can see all the files in the current directory, however when I go to execute the file it will give errors like "file not found", even when it most obviously is. If you look at my command history in the screenshot, you can see I can ls into a directory and see it's contents. When I try to run the file, I get the "no such file or directory" error.
However, if I type simply 'vm', I can't use tab completion to complete the directory name, and my third command is me typing 'vm' and hitting tabtab, it lists a bunch of vmware specific tools instead of the subdirectory name. I can then ls and see my current directory contents, and it will list only the single subdirectory. However, then I tried to use the full filepath from root to run the file, still to no avail. If anyone has any insight,
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
I need to process billions of small files using bash shell commands with limited memory size (256MB). If any of those files contain certain "keywords", the file will be removed. I tried with command:
find . -type f -exec grep -i -l -H "keyword" '{}' + | xargs rm -rf
where all files are located within the current directory. But the command above failed in "out of memory".
How would I rename a file say old.txt to new.txt in Linux using commands?
would it be...?
rename old.txt new.txt
below are the details of my system. I have bash as my current shell, some really common commands aren't working.
Do I need to do a re-installation of bash? Or how do I install a selection of bash commands which I need? (for example a subset of [URL])
Code:
root@sdptfw:~ # uname -a
Linux sdptfw.sdpt.co.za 2.4.36 #1 Tue Jul 22 13:13:24 GMT 2008 i686 i686 i386 GNU/Linux
root@sdptfw:~ # echo $SHELL$
/bin/bash$
[Code]....
I want to do something like svn add dir1 dir2; svn ci dir1 dir2 but have it be only 1 revision. Is there a way to do this? Is this the correct way to add new folders (with contents) to the repository? We are restructuring the trunk, so I cleared it out and plan on putting these directories with their contents in it.
View 1 Replies View Relatedhow I sould do the following?
I have a folder called "Downloads" and among its contents there are a bunch of files with "flv" extension.
If I do
Code:
ls path/to/Downloads/*flv
I will get something like this:
[Code]....
(The reason I want something like that has to do with a small script I'm trying to write).
I want to search a directory recursively looking for new .rar/ .zip files. When a new file is found I want to extract the contents to another directory. To top things off would like to rename the source file as something like original.rar.extracted.
View 8 Replies View RelatedI have bought an external usb hard drive on which I back up my three computers every once in a while.Space will quickly be used up.I can't find that little bit of research that I need yesterday.Here is what I would like to find:An application that eliminates doubles in identical files and renames files that have changed by appending the last saved date yyyymmdd to the file name.Does such an application already exist?
View 6 Replies View RelatedI have two text files on Linux. One contains a list of valid IDs. E.g:
abcd
efgh
ijkl
etc.
The other contains a list of invalid IDs. But, some of these also appear on the list of valid IDs, in this example "efgh":
mnop
qrst
efgh
etc.
How can I easily construct a text file that contains all the lines from the invalid list that do not appear in the valid list? That is, I want to end up with a text file that has:
mnop
qrst
etc.
I'd like either some Linux commandline magic of some clever Vim trickery.
I want to list the contents of a zip file amd put each entry into an array. I've been doing
[code]....
What happens when the script executes is that the ssh connection works and parks me at the remote hosts's shell login. Therefore, the "firefox" command refuses to execute. I need to know how to make the "ssh" connection occur, stay open, and go into the background so that the rest of the script can execute.If I could also do this with the "firefox" line so that the entire term window could be closed would also be helpful.
View 3 Replies View RelatedIm trying to auto rename badly named mp3's using info from the id3 tag. I got a nice little program called id3ren, it works fine apart from it doesn't add the track number. Cant figure how to enable this function. The track numbers are in the ID3, but it just renames to Artist/Trackname. Any other users on here?
View 9 Replies View RelatedI would like to be able to connect to a machine, list a directory, wait long enough for me to see the results then move on to the next machine.This is failing:
Code:
#!/bin/bash
while read line; do
[code]...
For reasons I won't get into, I need to copy directories so long as the average system load is low. Can someone help me write a BASH script that will copy the contents of a directory, but check to make sure the average system load is below X before copying each file, and if not, wait Y seconds and try again?
View 3 Replies View RelatedI have this script:
Quote:
for f in d*; do mv "$f" "T${f#d}"; done
it outputs all files which strats with letter d to T but it doesn't work when i run it from Cron. It only affect root file / .
How i can make work like this:
/home/user/files/dfile.txt
=>
/home/user/files/Tfile.txt
I guess the title says it all. I'm looking for a program that will rename a massive amount of files at once. JPGs specifically, or PNGs. More specifically,I'm creating a stopmotion movie. Using the program StopMotion. And for that, all you pictures, or frames, have to be named 001.jpg 002.jpg and so on. I've got about 300 or so images, and they're all named the default thing that my camera names them, you know, like DSCIM8520 or whatever. I'm looking for maybe a command line program or GUI is fine too, that will do this for me.
View 3 Replies View RelatedI have many files in a directory. They all have names with a .pdf extension. How can I remane all of them so that they are named as so... 1.pdf, 2.pdf, 3.pdf? I want to do it with one command or somehow that I do not have to manually rename each one.
View 1 Replies View Related