bash script to give sensible names to a large number of photos. I hope to be able to run a script with an argument which will become the filename followed by a number beginning at 1.
Code:
./file_rename.sh Summer2009_
Summer2009_0001
Summer2009_0002
Summer2009_0003
[Code]....
i have lots of files with dots insde file name for example:
document.1.is.bigger.doc
resume.version12.doc
10.photo.www.cnn.com.jpg
i want to rename all files in that directory to be the same (with same extention) but convert dots to underscore "_"
how can i do that on bash script / php.
I need to rename the resulted searched files from a loopI have the following code:
find . -name DOC* | while read i
do
find $i -type f -name '*.txt'
done
basically, I am searching for all txt files inside any folder starting with DOC name.this code is working fine with me.I need to rename those .txt files to .txtOLDOS: Ubuntu 10.4Bash shell
I have scowered the internet for the answer to this one. I need a script to rename multiple files to the same exact name, run a program on the file then do the same for the next file. We have a unix backend system that is expecting to load the file with the filename of cards.in So I will have files named card.2009xxx, like i said i will have around 4 or five of those. I want the script to rename card.2009xxx to cards.in, run our unix program on cards.in which inturn changes the file name and once complete i want the script to rename the next cards.2009 to "cards.in"Until there are no more left in the directory and the unix program has processed all the files. All of this is occurring in the same directory. I have written some scripts but they fail by moving for example cards.200901 to cards.in then immediately moving cards.200902 to cards.in and that is not good because it is overwriting valuable data
View 10 Replies View RelatedI'm writing a bash shell script that among various other things will traverse through a directory with hundreds of files and rename those who match a pattern found in a config file. It's expected that only about one in ten files will actually match, and those who don't, will simply just be ignored for this purpose.
This should for instance cause the file "dBase program file December 1987.prg" to be renamed "Clipper source code December 1987.prg", and conversely "C++ source August 1996.cpp" to be renamed "C source code August 1996.cpp" etc.A sample file such as "Random Data File.dat" should not be renamed here since it's not mentioned in the config file..What is the quickest, most elegant way to do this in bash?I am thinking of using bash's built-in regex matching combined with the /bin/rename utility, but don't quite know how to get started to catch this..I guess there are plenty ways of doing this in perl and elsewhere as well, but since this has to integrate into a pre-existing bash script, that's what I'm looking for.Anyone out there with a spare moment to offer a hint in the right direction?
I am trying to write a bash script that will extract a .cbr (.rar) file, traverse the extracted files in alphabetical order and rename them 001.JPG, 002.JPG, 003.JPG, etc.So far I only have this much to extract it:
Code:
#!/bin/bash
#
[code]....
I am to rename all the files within a directory (which contains multiple subdirectories) recursively without invalid characters.
I tried the coding posted above.
find . -type f -printf '%p
' | while read file; do
oldfile=$(basename "$file")
newfile=$(echo "$oldfile" | sed 's/[^A-Za-z0-9_.]/_/g')
if [ ! "$newfile" == "$oldfile" ]; then
echo mv "$file" "${file%$oldfile}$newfile"
code....
but I get an error on both of them stating "find: bad option -printf find: [-H | -L] path-list predicate-list"
I have wrote a 1 line command that parses a file, locates the IP Address in the file and then trims the output the way I want it, and then sorts numerically and by uniqueness and then >> appends to output.txt
I can get all the IP's into 1 file "output.txt", but what I am really looking for is some type of way to create a text file, for each IP it finds labeled xxx.xxx.xxx.xxx.txt and also put that ip address into that file..
xxx.xxx.xxx.xxx = the ip address it finds
I have this cool bash script that I worked hard on. But it broke down when it can across files that had non-English characters. Another small problem was getting it to descend into a directory. If it renamed a directory it would not descend into that dir to rename the other files. I would have to run the script twice on the same directory.
Here is the script:
Code:
find -type d -o -regextype egrep -iregex '(.*.ogg|.*.mp3|.*.wav)' | while read s
do
rename -v 'y/A-Z/a-z/' "$s"
done
find -type d -o -regextype egrep -iregex '(.*.ogg|.*.mp3|.*.wav)' | while read n
do
rename -v 's/ /_/g' "$n"
done
A French name like this:
Code:
Chateau De Sable (imagine accents above the letter a)
became this:
Code:
ch303242tea_de_sable
This is not what I wanted.
Why would the script not descend into a directory after it was renamed?
I want to remove duplicate or multiple similar lines from multiple files. I.e. if I have four files file1.txt file2.txt file3.txt and file4.txt and would like to find and remove similar lines from all these files keeping only one line from these similar lines. I only that uniq can be used to remove similar lines from a sorted file.
View 9 Replies View RelatedUntil now i haven't had to dabble with bash scripts.
I have a program that reads in data files. These are named datafile01_R, datafile01_G, datafile01_B, they then increment, so datafile02_R etc i have about 600 of these. the program reads in 3 data sets at a time from each run, so files_01 r, g, and b.
The program then does its magic, and outputs about 40 different files, depending on the file, they gone to folders named R, G, B, psa, or tracking.
The program itself has configuration files to say where the files should gone when analyzed, there is also the config files that reads in the data sets.
At the moment i have to run one set of data, then go in and manually change the input file location, and run again. But, doing this, even though a different data set, the new set overwrites the old set in one of the output folders. So i need a way to increment the output filenames after they are written and before the program is run again with the new data set.
How I could rename multiple jpg files. Say I copied IMG0001.JPG until IMG0134.JPG from my camera, and want to rename IMG0001 until IMG0064.JPG to 'party01.JPG' untill 'party64.JPG', etc. In windows there was a stupid wizard to rename files when you copied them onto your HD from a camera. Is there any good way to do something similar in ubuntu?
View 1 Replies View RelatedI am quite new to script programming and I am facing an uphill task to rename files in one folder. I have gone through similar posts but most of them deal with renaming files by changing the file extensions.Problem : I have a folder which contains files like bild01.jpg,bild02.jpg. There are more files in the folders which should remain untouched. I want to rename these 'bild' files as follows:
bild01.jpg -----> 1c.jpg
bild02.jpg -----> 2c.jpg
bild30.jpg------>30c.jpg
I would like to create a script as:
#!/bin/bash
npics=`ls -1 bild*| wc -l`
[Code]...
I have thousands of files in hundreds of sub-directories that need renaming. The files I need to rename all look as below:
Note the .ogg.mp3.
been_all_around_this_world.ogg.mp3
I want to remove the .ogg from the files, so in this one case it would end up renamed looking like this:
been_all_around_this_world.mp3
I've got about twenty folders with names such as "Bennett Galleries" or "Athletic House" and I want to rename them to "Bennett_Galleries" or "Athletic_House". Any right utility to use to accomplish this (sed, awk, bash script, etc...)?
View 2 Replies View RelatedCould someone help me find a way to rename a file to a different name containing parts of its old name?
For example:
Original file name: filename1.abc.xyz.some.other.stuff
Final file name: filename1.abc.xyz
The length of the file name is not constant. the abc.xyz is not constant but that format is (three numbers.three numbers) the .some.other.stuff is not constant and its what i want to get rid of
I'm trying to figure out how can I fill up multiple files with easytag. It looks like one can do it by selecting all files and using one of the schemes like " %a - %b/%n - %t " but to be absolutely honest I have no clue how it works. I'd like to fill up all selected files' tags with Artist, Title, Album, Year, Track# and Genre. How can one do it ?
View 9 Replies View RelatedWhat bash command can I use to rename or change the extension or name of a batch of files (for example, from .php to .html)?
Furthermore, is there a simple bash or python script/command that can be used to open a batch of plain text files one-by-one, search for all instances of a specific word, and replace all of those instances with another word?
I'm trying to write a script to process some images and rename them, or more specifically, renumber them so that pg_0001.png becomes pg_0.png, pg_0002.png becomes pg_1.png, etc. I've looked at the rename command and sed, but I'm not really very familiar with these. It should also be part of a bash script that I've written for the processing of these files - this is what I have so far:
Code:
#!/bin/bash
pdftk 2012 theatre Sep 2009.pdf burst
[code]...
I named a number of files with spaces in them, and I want to replace the space with "_". However, every time I write a command in the shell with the file name (eg "Spring 2011"), the shell doesn't recognize the file or directory. What can I do about this? Is there any way to use the unicode character for a space?
View 5 Replies View RelatedI'm pretty new to bash scripting, but I really want to wrap my head around it.What I'm trying to do is: From directory "A": Go in to all subdirectories and rename all files within icrementally according to the directory name. SO:
|-- Varian
| |-- FB1-page132.pdf.png
| |-- FB1-page133.pdf.png
[code]...
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
How would I rename all files with a leading decimal point recursivley? I some how got all my music files to have a decimal point.I tried the below and got a " sed argument to long".[CODE]find /media/MUSIC -type f -name "*.wma" | xargs -0 sed -i 's/.(.*)/1/'[CODE]
Another question, can i just use -type f with out -name ? I am sure that all the files got the decimal point added as the first character.
I have a set of files containing data that I need to re-arrange into one single property list.
The files that I have look like this:
Code:
# cat uk
<string>10</string>
<string>11</string>
...
<string>29</string>
[Code]....
So the lines in the files match up but I haven't found a way of reading several files line by line.
I have written quite a few separate bash & scripts and php scripts that up to now I have run from cron jobs. However I have to estimate how long each takes to run, before running the next and so it probably takes much longer than necessary to run them all. They have to run in order.
Now there are so many I am thinking it would be better to have a master bash script that would run one after the other, but I am not sure how to get the master script to wait before starting to run the next script. Is this possible and is there a command that will make the script wait between bash and php scripts , for them to finish, before running the next?
I am trying to rename some files that do not have a pattern in their names to a sequential names. original file names are in the form of REC92837498, REC9837449 and so on. I want to rename them to REC_1, REC_2...etc.
I used the following script:
Code:
j=1
for i in $(ls -rt REC*)
do
/path/${i} /path/REC_${j}
[Code]....
We have a problem at work that we are using Word Press And now for security we have to delete install.php in WP-Admin and rename upgrade.php and install_helper.php to *.bak
Im a noob in Script creating (Had a bit practice a couple of years ago but allready forgot T.T) So what i ask that is there a way to make a script
That:Finds wp-admin(if it exists) folder enters into it and there deletes install.php and renames upgrade.php and install_helper.php to *.bak and the makes the same process again untill theres no wp-admin folders left with these files, We have alot of web pages so manually it would take about a month to find em all (about 3000 pages :
Is there a way, preferably in python or BASH, to rename files from a list? for instance, track1.mp3, track2.mp3 should be renamed to the names stored in a file listing song names. I have tried to loop a variable through directory listing and renamed them, only to find that filenames with spaces can't be assigned to a variable as a whole. To solve the problem above, I have tried the read command in BASH, which enables the program reading line by line from a list. However, It was failed to pipe the results from directory listing to the read command.
View 14 Replies View RelatedI was hoping to get some pointers on how to rename files based on database entry. I got hundreds of thousands of files that has GUID name assigned to it. only way to find out the file name is to look up the database table. Its obvious that this is not efficient. I couldn't find any tutorials on how to do this. Please point me to right direction. A starting point would be very helpful.
View 1 Replies View RelatedMy problem is this:I have a number of directories, all containing files of different name lenghts, including letters, numbers and possibly spaces. I want to recursively rename all of these files, so that only the _last_ 5 digits (not counting the extension) remain. In other words: I want to cut off all but the last 5 digits and not touch the extension.
I've tried to read up on tr, rename (perl version), sed, cut etc. and browsed through some threads here, but so far couldn't quite figure out how to do it.
If someone could point me to the right (standard) CLI tools and syntax.