I Have a system,on which I have dynamic internet, I want to generate a mail to my specific mail id as exp-123@yahoo.com. Like this,to give me the information about my dynamic IP Address. I also want that if my internet reconnects then the mail must be generated to give new IP address information.
View 3 RepliesDespite enabling the "auto-complete" to complete an e-mail address from my personal Address-book, it doesn't work. After pressing on the "To"-button, no e-mail address is visible in the list of contacts. That is strange since the contacts are visible within the address book itself. However, when I typed the name of a contact within the "Search"-field of the address book, it also shows no result. Strange... Additional info: two days ago I replaced addressbook.db in Debian manually by the addressbook.db from Ubuntu 11.04 (I'm migrating from Ubuntu 11.04 to Debian Squeeze). It seems that there is no connection between the visible contacts in the address book and the rest of the Evolution. How can I solve it?
View 3 Replies View RelatedI am on a Fedora 12 box, and it's my job to do some custom configs to xorg.conf. To start this, I have to remove a bunch of devices' entries and modify others. We're using the proprietary Nvidia drivers, and they work fine except that something - perhaps the NVIDIA X Server Settings app - keeps modifying the xorg.conf. After I write a change to see if it will work or break the machine, I have to restart the entire computer, as restarting X by itself blanks out the monitor so that I can't even see a virtual console. After the restart, X starts just fine and goes into GNOME, but as soon as I look at the xorg.conf, everything I've removed or commented out from the original, auto-generated file has reappeared. How to stop this infuriating behavior so that I can rewrite xorg.conf and make the changes stick?
View 7 Replies View RelatedMy courier server cannot recieve mail.
My freebsd installation has worked for quite some time w/o problems.
I'm using ubuntu as a replacement and have tried using the same settings from my previous server.
I keep getting the following error.
courieresmtpd:
I have configured mail server using Centos. I have also used procmail and used squirrel mail as webmail browser. I want to provide auto reply facility to my users? What should I do?
View 5 Replies View Relatedi have a linux box at work that was configed by some that has left the company. we have an email add: e.g test@test.com, if you enter that mail add to a new email it then sends the mail to several email accounts the are on the server.i would like to remove and add new users onto that email address, is there anyone out there that can help?
View 1 Replies View RelatedI have tried almost all the music programs ie, banshee, rhythm player and I cannot figure out how to get it to work.
View 3 Replies View RelatedI have a problem related with certificate generation. I had successfully installed openssl. After that I do these.
[root@localhost openssl-1.0.0a]# cd /usr/local/ssl/misc
[root@localhost misc]# ./CA.sh -newca
CA certificate filename (or enter to create)
Making CA certificate ...
Generating a 1024 bit RSA private key
.........++++++
..........++++++
writing new private key to './demoCA/private/./cakey.pem'
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:
You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank. For some fields there will be a default value,
If you enter '.', the field will be left blank.
Country Name (2 letter code) [GB]:IN
State or Province Name (full name) [Berkshire]:KERALA
Locality Name (eg, city) [Newbury]:KOCHI
Organization Name (eg, company) [My Company Ltd]:squad
Organizational Unit Name (eg, section) []:SUPPORT
Common Name (eg, your name or your server's hostname) []:localhost
Email Address []:jk.r@squadinfotech.com
Please enter the following 'extra' attributes
to be sent with your certificate request
A challenge password []:mahhghh
An optional company name []:mca
Using configuration from /etc/pki/tls/openssl.cnf
Enter pass phrase for ./demoCA/private/./cakey.pem:
I am unable to access the ../../CA/newcerts directory
../../CA/newcerts: No such file or directory
Distro:Centos 5.3 kernel 2.6.18
I'm using Debian 5.0.4 with shell access only, exim4 and mutt. I would like 'all' outgoing mail sent by any/all users to be auto'ed CC (not BCC) to a specified e-mail account for auditing purposes. I do have it working for BCC using 'unseen', but I really want it be CC. I have spent hours of searching/reading/testing and have not been able to find out how. I have seen it done on other shells I've been on as a user; any mail that I sent out, I did not see it was being CC'd but once the recipient received it was also addressed 'toaddr@thatshell.com').
It's not practical to add an alias for every user on the system (/etc/aliases) and to remember to do so each time adding a user. If I set in etc/profile alias mail= mail toaddr Users can still find ways around that.
I want to set my desktop IP address to always be 192.168.1.2. The NetworkManager connects to the network automatically and the IP address is assigned randomly. I can set up another connection in NetworkManager and always change over. But is there any way to make the default eth0 interface to be permanently set to a certain address (using NetworkManager, not ifup)?
View 9 Replies View Relatedi m using centos 5.4 for Data Server, there i hv shared a directory to store data. i want, when ever owner of that data does delete any thing from directory, system should send me a mail with logs of that deletion action with the detail some thing like bellow
1- IP of system, from where owner did access the server and delete the data.
2- Date, Time and Name of File with Path.
These logs should be sent me by email automatically.
I have Evolution mail troubles.
Evolution won't auto download mail and if I do it manually by clicking Send/Recieve it shuts down. When I restart it the new emails appear.
If I go to Edit and click on Preferences Evolution locks up and I must force it to shut down in order to restart it.
Basically it's become next to useless.
I've tried using synaptic to Reinstall and Completely Remove the application however when I reinstall the same problems are there.
Is it possible to re-set it back to defaults? I don't mind if I loose all information as I can back up easily enough.
How could I disable this annoying feature?
Half the time it selects the wrong address and sometimes I miss it and send emails to wrong people.
how to remove some email addresses from the auto-completion list which appears when starting to enter a new mail address into the "to:" field. Since I'm using Evolution for several years now there are a lot of e-mail addresses which are either obsolete or simply incorrect.
View 2 Replies View RelatedDespite what the man page says, and what I have read out on the web, I cannot get the mail command to let me change the "from address"
I have tried to change the reply address (-R my@address.com)
I have tried to change the from address (-f my@address.com)
..... and so on
Anyone have any luck, from the command line (as I am setting up cron jobs) in changing the "from" address?
echo test | mail -s "This is a test" user@domain.com (this is the basic command I wish to use, but change the "from address")
I've registered a top-level domain site.com pointing to my IPv6 address (6to4 tunnel). Everything looks ok, dig command, nslookup command shows requested output, but: I'm not able to connect to mail.site.som on 110 port. I still get an error messaged, that connection has been refused. I've populated the ip6tables with commands to open desired port but with no success. I'm listening on 25, am able to connect to this port, but not to 110.
Command netstat -an | grep "LISTEN " shows that I'm not listening on 110 port, although I'm just added this port to the firewall exceptions. Telnet to ::1/tunneled IPv6 address is successful. Postfix installed, configured properly, ping6 working. Everytime I try to send email from external domain, I'm advised that the mail domain is not pointing to A record.
I have several computers at work running Fedora 12. From time to time I need to remotely connect to them, usually via ssh. Each computer is assigned an IP number automatically upon startup, however due to circumstances beyond my control they are not recognized by host name by the domain server. Therefore I require the IP addresses in order to connect rather than the host names. I have no way at present to rectify this situation.
When there is a reboot, I am not always guaranteed that the IP address will be the same as before, although in practice this is usually the case. If the IP address is changed and I am logging on remotely, I am unable to connect! I can't know the number until I am again physically sitting at the computer.
As a solution, I would like each computer to e-mail me its IP address each time it boots. My first attempt was to run a script at the end of /etc/rc.d/rc.local that runs ifconfig and places the output into a file. This file is then sent to my address using sendmail. The script works fine, but I note that the output from ifconfig at this boot stage does not contain an IP address! Obviously, it is being assigned later on in the startup process. Either that or the command ifconfig does not work the same at this stage as it does once I am logged in. I require somebody with more expertise than I to comment on that.
Finally then, my question is, at what point in the startup process is an IP address assigned and the output from ifconfig would contain this address? Is there a more appropriate place rather than rc.local in which I should run my script? Is there a more appropriate command rather than ifconfig that ought to be used instead?
---------- Post added at 05:41 PM CST ---------- Previous post was at 05:30 PM CST ----------
Let me show you my attempted solution in more detail in case you're interested. The script is called .SendIP.bash and is located in my home directory. Here's what it looks like (with some censoring to protect me from public ridicule):
#!/bin/sh
# This script will send ifconfig information to my e-mail account.
# This allows me to have the latest IP address assigned to this computer.
cd /home/MyUserName
hostname > .IPmessage
date >> .IPmessage
ifconfig eth0 >> .IPmessage
sendmail -f$HOSTNAME MyAddress@MyCompany.com < .IPmessage
As I stated above, the output from ifconfig does not contain the IP address when my script is called from rc.local.
I just set up a new router for our home office. I've enabled traffic logging, and I'd like to have the logs emailed to me. However, in order to configure email-notification, the router needs and outgoing mail server. Forgive me, but I don't really understand the terminology being used here. I've googled this a bit, but I'm not sure I now what "outgoing" vs "incoming" mean in the context. I tried using my gmail account as the outgoing mail server (smpt.gmail.com) but it requires TTLS encryption, and there's no option for that on my router.
So I figured I'd setup a simple mail server on my local network. I have a dedicated server machine, so I'd just configure a mail server there. But I got stumped at the first input box (in the yast module):"Outgoing Mail Server".That's what I wanted to use this server for. What is this "outgoing mail server"? I understand it in a normal emai context (I think) but this is confusing me. I've read through the HowTo on the openSUSE wiki, but it still doesn't answer this question.Isn't there some way to have a simple, local mail server (without MX records and the like) so I can send email from a local machine?
how to hide an ip address while sending through evolution mail so the recipient cannot see the ip in the email header?
example below: I sent an email from evolution to my gmail account and I can see my real ip address in the mail header 80.x.x.x
Authentication-Results: mx.google.com; spf=neutral (google.com: is neither permitted nor denied by best guess record for domain of email@email.com) smtp.mail=email@email.com Received: from([80.x.x.x] helo=[192.168.1.6])
I can hide my ip using a proxy but what are the other ways of doing this?
I have configured qmaill with mysql database and i am using squirrel mail as a webbase client. I have used qmailadmin to create users email id. user which are create using qmailadmin or vpopadmin are able to login into squirrel mail webbase client. But I am not see those user in squirrel mail global address book. please help and provide me prodedure to create global addres book where i can see all user created using qmailadmin or vpopmail.
View 7 Replies View RelatedI have setup mail server on Ubuntu 9.10 and it's is working fine.I am using Webmin to addministrate my mail server.My Ubuntu server name abcs.I send a test mail from Wedmin for user gom.Why it keep adding InfoNet. What I would like is setup as gom@abcs.com.
View 1 Replies View RelatedIm running Ubuntu server 10.04 lts
Im trying to get postfix to receive mail from one address and pipe it to a PHP file for a help desk software called Trellis Desk.
They recommended that I use Cpanel but its not free and my boss is not willing to pay for it. I need a free solution.
I know my way around Linux but Im no professional
I wish to intercept/forward emails that is sent to one user on multi user mail server.I only want email from one specific address or group,to be redirected and it will be redirected to another user on same server.The email should not arrive in original users inbox.".forward" file can not give me such solution,because ".forward" file will forward all mails to another specific mail id,which i don't want. I want only specific users mails onto another local user.Is this possible in sendmail?Anybody have clear idea of "virtusetable" & "aliases" file?
View 1 Replies View RelatedMy ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows -----
... while talking to smtp.mydomain.com.:
>>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<>
<<< 550 5.7.1 Client does not have permissions to send as this sender
554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
Does anyone know if there's a way to make nano support auto-complete and auto-bracket closing?
View 1 Replies View RelatedI code primarily in jQuery/JavaScript, and I'm looking for a text editor for Linux that has auto-indent and auto-outdent (seems to be tough to find that). Any suggestions? I've checked Gedit, Cream, vim, Bluefish.None of them seem to have this feature.
View 2 Replies View RelatedI have recently zypper dupped to opensuse 11.4 from 11.3. My only problem is I am unable to access my address book when I click <select> when sending a new message; only recent addresses show in the window that pops up. Even if I select <all> in the list of choices, only <recent addresses> show up. In the useful tips that appear upon opening K-mail it states that if I click on < folders> then < Mailing list management> I will be able to select and manage all of my address books. But when I click on <folders> the <mailing list management> is faded telling me that it is not enabled. My question is what must I do to enable the mailing list management to be enabled? I have enabled mailman with no help.
View 1 Replies View RelatedI have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI am trying to configure mutt to send email via command line . It works fine when I configure it for gmail as follows:Quote:
# SENDING MAIL
set copy=yes
set smtp_url = "smtp://mymail@smtp.gmail.com:587/"
[code]...