I have setup a server (first time) Installed Ubuntu and apache2, MySql and PHP. Test and get "Its Works"
I have apple Extreme Router, I can access the Server by SSH and local IP address of 10.0.1.117 Cannot access from outside on www ? I think this is a porting Issue.
I am running an apache2 server in ubuntu. When I connect my laptop directly to my modem, I can access my web page (from any computer or phone) without any problems.I start getting weird issues when I try running my web server behind my DLink 524 router. It will run perfectly for about an hour or so then the web page will become inaccessible from any computer except the one which I am running my server on. I have made sure to forward and requests to port 80 on my machine and I have also set the router firewall to allow access through port 80 and port 443. I don't get any error messages in my apache2 log when my site goes down.Since the site worked perfectly when my computer was connected directly to my modem, I figure it has to be a router problem.
View 13 Replies View RelatedI recently got a static IP from my ISP. I Have two machines connected to my DLink wireless router. A windows laptop and linux machine runninf centos 5.3. I would like to host an application apache/tomcat based on my linux machine and would like people to access it from the outside. What configurations do I need to make on the Dlink wireless router and my linux box to make it work.
View 1 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View Relatedi have a vsftpd server running well but i want to make/force all users to use sftp and not just ftp is this possible?
View 1 Replies View RelatedI'm using a cross-over ethernet cable to connect a Desktop Windows 7 box, and a laptop running on SUSE 11.2. I want Windows to connect to the internet via the laptop's wireless interface.
View 1 Replies View RelatedIs it possible to use SFTP in yum. As per my company policies ftp,vsftp are disabled in my server.Googled the same but didnt get any valid points
View 4 Replies View RelatedWhat are the advantages of sftp over ftp?
View 4 Replies View RelatedTrying to sftp (get) a file, and am getting the following message:
spawn sftp -oPort=10022 jn000JN@sftp.section111.cms.hhs.gov Connecting to sftp.section111.cms.hhs.gov... The authenticity of host 'sftp.section111.cms.hhs.gov (204.76.173.42)' can't be established. DSA key fingerprint is 66:64:07:cc:39:89:56:2b:3b:4c:fd:cc:3d:2a:7a:9c. Are you sure you want to continue connecting (yes/no)?
Is this an issue with keys? Where are the keys on a sftp client stored? I am running this sftp script from a different directoy than normal if that matters.
I can't sftp directly into a particular host. To move a file from my home machine to the host, I must sftp a file to an intermediate host; ssh into the intermediate host; and sftp the file to the final destination. Is it possible to avoid such madness?
View 5 Replies View RelatedI run a linux file server for my office and we user SFTP for remote partners to login and download files. Is there a way to see if there are any active connections or logins so I can know when it is safe to perform maintenance on the machine?
Since the machine is almost constantly serving large files, scheduled maintenance is often bumped off due to someone either upload
I am using Ubuntu 9.10 to configure telecom equipments. The software downloading process to the equipment requires that my Ubuntu laptop should act as a SFTP server where the software bundle for the equipment is stored. The equipment act as a SFTP client and requests the software from the server. The equipment have SFTP client hardwired in its memory. The same process i did with windows and i used Putty and FreeFtpD and it worked. Now i want to move to Ubuntu as i want to show that it is better. I have installed OpenSSH server in my laptop and now i need to know few things that i could not find anywhere straight forword.
1)I am using a ubuntu live usb drive with persistancy. How do i set username and password for the client, that is how to create the account in OpenSSH server?
2)I need to keep the software for the equipment in a folder inside server, so that it can be transferred to client upon request. In windows I give the path of the folder to FreeFtpD server. How to do the same in OpenSSH server?
Setting up servers and clients in linux is completely new for me.If this is done (as i know it can be but dont know how) then i can completely move from windows to Ubuntu environment.
what is the command to sftp from one linux host to another linux host through a SOCKS v5 that requires authentication? I have tried:
Code:
# sftp -o "ProxyCommand netcat -X socks_proxy_host:1080 %h %p" external-server
I know this does not have auth in it but I was going to come to that later
output
Code:
Connecting to external-server...
netcat: invalid option -- 'X'
[code].....
I need to download some very large files (circa 75 GB) from a remote server via SFTP. I've been using SFTP via the command line on my Linux netbook. Around halfway through, the transfer stops and says "stalled." Can anybody recommend a reliable way to download these files?
View 1 Replies View RelatedI wrote a script ages ago to automate an FTP transfer. This was easy as within the script you can specify the password with password <whatever>. Now I am wanting to do a similar thing with SFTP (SSH). I know that SFTP works differently and I cannot specify the password within the script - what do I need to do on the server I am connecting to to either "trust" the host I am connecting from or to somehow specify the password for "sftp user@some_host"? It's IP address will always be the same.
View 4 Replies View Relatedi am trying to delete multiple files from sftp with non-interactive way as per the desire ext. But i am not able to get the proper extension of the files for removing files.
lftp -u ${user},${passwd} sftp://${ip}<<EOF
cd ${path}
rm *${ext}
bye
EOF
I understand how to get a file from an another computer using the sftp syntax
So i can get the file abc from comp2 to comp1
But how can I send a file cba from comp1 to comp2 using the sftp(I am still using comp1)
I had an ftp server about a year ago. It was running off of windows 2003, and didnt have any protection on it besides the normal firewall and NAT router. I shut it down after a couple weeks because i was constantly getting password hackers and weird things trying to break inused Ethereal to monitor packet traffic).Anyway, ive decided to take another swing at it and try to configure a more secure server on a more secure OS. I've found multiple HOWTO guides by surfing google BUT most/all of them want me to download a file called "openssh-4.5p1-chroot.tar.bz2", however the address they all point to does not exist! That address is so my main questions are where can i find this file? Is there a better one that would work? Is there a tutorial someone knows about that would get me past this?
I built a computer last week for this purpose (only had to buy a few parts so it's not like i spent $500), and now i feel like ive hit a dead end just cause a site decided to take a file down and no one else has realized it's happened except me.
If i were to build an sftp client which launched with logon details, and could then controlled by sending commands to that daemon; would that be ideal way to create an sftp client with disposable credentials?
View 1 Replies View RelatedI'm trying to find a software which could map sftp/scp services to a windows drive letter. I know there are quite a bunch of those available, but i haven't found a single one which could run with SYSTEM or Netservice privileges or have decent command line options so i could elevate the program myself. The mapped drive should be available for other services running on the same server.
Most of the programs (sftp netdrive, expandrive, etc) have only option to startautomatically only when someone logs in. Because of that they are useless to me.Their inability to handle non-interactive starts is a bummer too. FTP->SFTP wrappers don't count as solution despite of integrated windows support for ftp drives. The way they are handled in windows makes ftp mapping unusable without some external ftp drive mapper software.
I am attempting to set up an automatic transfer via sftp using public key authentication. I have created a public/private key pair to connect to the remote server without using a password. I have also been able to use this key pair to login from the command line: sftp -vvv -oPort=<server-side port> user@server.Debug info from interactive command:
Code:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
[code]...
How I can do a ftp connection putting the user and passwd, and I would do! Today, I need to know how can I do this, but in SFTP!
View 1 Replies View RelatedThis is my first thread ever to make on the linux forum, and I just began using linux Ubuntu Lucid for my server. Please bare with me because I think I am questioning such a basic question. How do you give sftp root privilege to user? I've made group "admin" and made 2 users under that group. Trying to upload a file onto a server using SFTP with one of the user and it fails and says "Permission denied."
I gave full sudo/root permission to the group "admin" from /usr/sbin/visudo I mainly use Tranmit4 but I also have filezilla. Or is there a way to run sudo command on either ftp client application?
I tried setting up sftp for my users. Each of my user have their home directory at "/var/www/public_html/$USER". When my users are using sftp, they can only see their own directories and unable to move to other locations of the system. I followed through the following tutorials: [URL]
The users are able to sftp into the system successfully. However, they are able to see the whole system. Somehow, it appears that the users are not jailed in their home directory although in the tutorial it states otherwise. The difference of my system against the tutorial is that I am using Dropbear for SSH server while it is using Openssh server. Although dropbear does not support sftp, I am able to login through sftp through the use of sftp-server. For the internal mechanics, I am not sure how though.
Assuming that when I tried to SFTP, the sftp-server is ran with the sshd_config, then everything should be working fine right? Do i need to run chroot command at all? The following is the procedure I used to attempt the objective:
1) Add a new user to the group: SFTPonly
2) Chown user:SFTPonly user/home/directory
2) Modify the sshd_config to what is reflected in the tutorial and other paths.
I am configure one sftp server(openssh) in my linux server. Its working fine. but when i try to connect its shows all folders like root, boot. but i need particular folder only. how to do this. I am using centos5.2
View 2 Replies View RelatedI have an account in university on Linux machine with 10TB of free space accessible via SFTP. I would like to backup my Windows 7 x64 laptop to university. Currently I am using rsync+cygwin, but backup is pretty slow (without shadow copy) and I hate console window appearing every day on my screen when I login.
So I am looking for something like Windows Backup but with support for SFTP. Combination of tools will work too.
I want to run a linux command with apache through web browser and that's is not working. and it's working properly when I execute this command through terminal, where is the problem?
NOTE: apache have the privileges to execute the command
Because of the configuration of my house, I need two routers.I have a DLink ADSL router as my main router and the Belkin N1 as my repeater.I have set up the IP address in the Belkin to be 10.1.1.10 - my DLink is 10.1.1.1. I have disable the dhcp in the Belkin and set the DNS as ISP provided. [URL]..I have set the channel to 11 and in the Ubuntu Network Manger I have set the IPV4 to Link Local Only. I can see the Belkin and connect with my PC.but it will not take me through to the internet.
View 9 Replies View RelatedI want to set up a Linux box as a wireless router to replace our existing Netgear WNR1000 router, as I believe the Netgear does not support the coming IPv6 protocol. Unfortunately, it is not flashable with OpenWRT or DD-WRT presently.
As we have Comcast, our cable modem acts as a dumb modem according to the customer support guy I talked to, and our router is the one that asks for the IP address from DHCP. Thus, when Comcast switches over to IPv6, I don't believe my existing router would work, correct?
My idea is to take a Linux box and put two NICs and a wireless adapter in it, using IPCop or Smoothwall to set up a router. I could then enable IPv6 support for when we have IPv6 with Comcast. Is that possible? Would there be a way to get BIND to hand out private IP addresses in the same subnet on the both the LAN NIC and the wireless card?
I have a desktop PC running Ubuntu 9.10 and Windows 7, and a Eee PC 701 laptop running EasyPeasy Ubuntu 9.04. I'd like to connect the desktop to the laptop with a wired connection (eth0), then the laptop to my ADSL router using wireless (ath0).
I have a crossover ethernet cable (I bought on ebay). I have set up my laptop with a static IP address on my LAN and it uses OpenDNS.
I have added this to /etc/sysctl.conf on the laptop:
net.ipv4.ip_forward=1
Then I tried this on the laptop:
sudo iptables --table nat --append POSTROUTING --out-interface ath0 -j MASQUERADE
sudo iptables --append FORWARD --in-interface eth0 -j ACCEPT
This is a variation on what I found on other sites describing how to set up a router. I don't understand iptables very well, but I gather that the above two lines should set up forwarding so that traffic from my router to the laptop will be forwarded to the desktop, and vice versa.
But this doesn't work. The connection doesn't even establish between the laptop and the desktop.
