I swited network cards because the card i was using wouldn'tlip, and the cable kept falling out. Now, the internet doesn't work. They're Both Dlink cards, but they might be diffrent models. The lights on the card are on, but I'm not gettin internet. Is their any command I can use to automatically reconfigure the network/card
i have 5 groups, i want to set 3 of them to have full permissions to a folder and set 2 others with read only to same folder, please help me to solve this problem. in other words i want to set this 5 groups diffrent permissions to a folder.
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
Having made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I"m not entirely sure that I have the correct model, but I think it's an HP photo-smart premium 309g, using a network connection. It was working fine on my Ubuntu 9.10 install before, but one day it failed with the message "cups-missing-filter". I accidentally deleted it from the list of drivers. Now, whenever I run a tool to install it back, it hangs at "searching for network printers".
Recently upgraded from FC11 to FC12, and lost the ability to print to my network printer. Couldn't figure it out, though I can continue to print from an old FC9 server, so I know it's not the print server, Netgear PS110 or the printer Samsung ML-2510. In desperation, I upgraded to FC13, and still no dice. Don't think it's a network problem as I've tried with a disabled local firewall (I'm behind a network firewall) and even disabled SELinux.
If I go through system-config-printer, I probe for network printers, and can discover the print server, but the queue is wrong (it has two ports, P1 and P2.) Neither PASSTHRU or manually written P1, the connected port, work. It will spool, then disappear. I'm using the Samsung ML-2150 Driver which I understand works for this printer and used to work on FC9, because the printer is not listed directly in CUPS' database.
I am working as a system administrator, i got challenging work from my team leader i.e., configuring network printer in redhat 4.2/centos 5. Initially i started with redhat linux 4.2. Unfortunately i didn't get any default man pages. I downloaded the rpm package mit-lprng.3.8.27-10-rhe4.i386.rpm and ran it. I got man pages of lpd but i couldn't able to start lpd services. then i downloaded the lpd daemon startup script from this site :Now i could able start lpd services.In server system i have configured the printer locally (shared and used LPD protocol). In client system i am unable to take test page even though it is connected to desired print server.Even some times it shows "remote host cannot accept control file(data file) 32
I am trying to add a printer to the network at home, but only want certain users to be able to access it. When I try to setup the users that have access in the printer properties it wont even allow me to pick users.What do I need to do to add the users into the list?
I do not have the hardware to do this yet. I simply want advice on what route to take before I make the investment. If I had the money I would simply invest in a wireless combo setup, but I unfortunately do not. I do however have an idea. I am currently stuck with a standalone system that is running XP strictly for the use of magicjack. I was thinking I could hook up this combo machine to that computer and network it in via that. However, would the scanning capability only reside in the hardwired computer or could I do a network scan somehow?
I want to know if there is any process to record the commands executed from CLI to be recorded in a diffrent file ONLINE.Meaning whenever anyone who is executing any command, the same should get recorded in /var/log/histlog online (as an administrator I want to keep a track of the username along with time and tty) from which the command is executed.I may use tail -f /var/log/histlog to check the commands executed online.I am using the RHEL5 with kernel as 2.6.18.I have used the lastcomm to check that, but donot find it very usefull as it prints extra informations also (not relevent) some commands which are executed internally by the system while loggin in by the user.
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
i have encounter strange situation i have set all my network configuration via /etc/sysconfig/network-scripts/ifcfg-eth0 ,eth0.2 ,eth1 etc ....i have used only once Gnome network manage settings to add routing since then all my network config change although all files mention above showing the same config i have set initially and same for Gnome network Manager.
is it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
Total Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
i have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
At present we are using windows print server getting user name and authenticated from domain server. I need your suggestion to configure linux printer server and how to share the printer to users and how to limit the user in taking printouts.
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden XXX is my server IP
I have two Suse un-firewalled computers connected via NFS. About a year ago I found instructions for a very SIMPLE way to share a CUPS connected printer using Yast. When I installed 11.4 I lost the instructions. It required no config file editing and took about two minutes. Google searches focus on complicated SMB-Linux connections like those suggested by swerdna.
How to created users in pureftpd and the users are stored in mysql database. I tried when i try to connect i got like this error authentication failed error
i have a NIS master server and 4 NIS clients. out of 4 nis clients two are acting as login servers ie users will login and do all their stuffs and the remaining two are application servers. But sometimes users login into applications servers and started doing all their developer's job. i want to allow only a limited number of users tointo this application users not all the users who are all part of the nis domain.all the systems are running RHEL 5.4 on hp's proliant x86_64 based servers. Please advice me how should i proceed? enabling ip tables is not possible in my environment.
When I have different people log into our ftp and browse to the same folder, some people see the files inside, some don't. all the user accounts are in the same group, which has permission to this folder. but the one user who can see the files is the owner. how can i fix it so everyone in that group who's the owner of the folder can see the files?
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?