We have a network printer in the my network. This printer ip adress is 10.70.51.162.
and I have a RedHat EL 5,2. And I have been using text mode this linux system. This linux ip adress 10.70.47.130.
Now, I want to use this printer on the this RHEL 5.2. How can i introduce this network printer in the text mode?
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
I want each packet (that match iptables rule) to be delayed by some fixed time interval. How to to this?
Preudocode: iptables -A INPUT -p udp <more conditions> -j DELAY --delay 50000 # delay UDP packets for 50 milliseconds
Update: @related http://superuser.com/questions/147156/simulating-a-low-bandwidth-high-latency-network-connection-on-linux
I'm trying to add my Samsung SCX4500W printer to my opensuse 11.2 machine running KDE.From Yast->Printer->Add printerI am able to set the printer up, however there is no driver for my specific network printer. Samsung does provide a linux driver but I have no idea what I'm doing when installing peripherals on linux basically
View 3 Replies View RelatedHaving made the transition from a certain widely used operating system to linux, suse 11.2, x64, successfully and pleasantly we are still left with a few problems.One of these is a few applications i have to use which run only in that old OS. ?To that end I have installed VirtualBox and got them to run with one glitch. I cannot print from VBox to my HP LaserJet 4000, lpt1 printer, which works fine in suse. Searching and posting on the Vbox forums turned up that lpt1 is not supported in the current vbox and that I need to set up a virtual network, set up the printer as a network printer and set it up as an lpd/lpr printer in Vbox WinXP. Have tried many different ways to do this without success, I think the problem is I do not know how to set up a network printer in Linux.
The virtual network is vboxnet0, which does show up in ifconfig, along with my eth0 net, and I can ping the windows guest, gateway and the host from either side host:suse/guest:winXP) respectively. Have tried numerous ways of setting up printer in YaST which works in suse but still does not work from WinXP guest. Have read the suse manual and several sources and searched forums with no results.Finally I am thinking I just don't know how to set up a network printer in linux. Using cups, kde, suse 11.2, don't know what else to tell. Samba is installed, although I am not using it to the best of my knowledge.
I am trying to set uamsung clx2160N as a standalone network printer on my home network. It is a printer with standalone network capability and is connected directly to my router and has a static IP number. We have a few Windows computers at home and they had no problem detecting the printer, installing the drivers and working. Unfortunately my Ubuntu computer recognises the printer and I can even access it's setup and diagnositcs through its IP number. However when I try to add it as a printer, drivers for it cannot be located. #ve tried setting it up three ways:1. Using Samsung's own setup package - finds printer and all the details it needs to work but offers no drivers2. Using Ubuntu's printer setup - recognises printer but stalls at Searching for Drivers dialog3. Trying to *** printer using CUPS - no problem finding and recognising printer, but when I come to search for the driver I get Internal Server Error.
I have of course been trying to do all of these as root. That's the limit of my knowledge reached and searches on the net aren't helping me either. The printer works fine directly connected via USB, so the drivers are on the computer somewhere. How do I get them set up to use the printer on the network?
I"m not entirely sure that I have the correct model, but I think it's an HP photo-smart premium 309g, using a network connection. It was working fine on my Ubuntu 9.10 install before, but one day it failed with the message "cups-missing-filter". I accidentally deleted it from the list of drivers. Now, whenever I run a tool to install it back, it hangs at "searching for network printers".
View 8 Replies View RelatedRecently upgraded from FC11 to FC12, and lost the ability to print to my network printer. Couldn't figure it out, though I can continue to print from an old FC9 server, so I know it's not the print server, Netgear PS110 or the printer Samsung ML-2510. In desperation, I upgraded to FC13, and still no dice. Don't think it's a network problem as I've tried with a disabled local firewall (I'm behind a network firewall) and even disabled SELinux.
If I go through system-config-printer, I probe for network printers, and can discover the print server, but the queue is wrong (it has two ports, P1 and P2.) Neither PASSTHRU or manually written P1, the connected port, work. It will spool, then disappear. I'm using the Samsung ML-2150 Driver which I understand works for this printer and used to work on FC9, because the printer is not listed directly in CUPS' database.
HOW TO ALLOW ONLY 3 USERS FROM THREE DIFF NETWORK TO USE PRINTER?
WE HAVE THREE NETWORK
192.168.0.0
172.16.99.0
10.28.250.0
I know samba will be use here, right?
but can configure this via samba?
and this has to be configured on machine where this printers drivers has been installed right?
Do I need to configure all in this "/etc/samba/smb.conf" file?
Printer name is HP Laser Jet M1005 MFP.
I am working as a system administrator, i got challenging work from my team leader i.e., configuring network printer in redhat 4.2/centos 5. Initially i started with redhat linux 4.2. Unfortunately i didn't get any default man pages. I downloaded the rpm package mit-lprng.3.8.27-10-rhe4.i386.rpm and ran it. I got man pages of lpd but i couldn't able to start lpd services. then i downloaded the lpd daemon startup script from this site :Now i could able start lpd services.In server system i have configured the printer locally (shared and used LPD protocol). In client system i am unable to take test page even though it is connected to desired print server.Even some times it shows "remote host cannot accept control file(data file) 32
View 2 Replies View RelatedEverytime I try to introduce my password the OS takes every single letter as an 'intro'. If I want to type, for example, 'batman', it will take every single character as an intro and therefore I can't get access to the OS.... what can I do?Btw, all of this began when I was trying to write something in a console. When I tried to type anything in the console was like If I was clicking on the 'close window' button, so I though I was a little bug and I had to restart.
View 9 Replies View RelatedIn a desperate attempt to overcome frequent crashing accompanied by XLog lines that suggest to me that Pulseaudio is the cause, I removed Pulsaudio from my Ubuntu 10.4(LTS) using Software Centre. Now I cannot start up Ubuntu but I can get to Terminal via the Recovery Mode. My question is how can I use Terminal to re-introduce Pulseaudio so that I may get back to where I was, albeit with the random crashes that I have had for many months?
View 1 Replies View RelatedI do not have the hardware to do this yet. I simply want advice on what route to take before I make the investment. If I had the money I would simply invest in a wireless combo setup, but I unfortunately do not. I do however have an idea. I am currently stuck with a standalone system that is running XP strictly for the use of magicjack. I was thinking I could hook up this combo machine to that computer and network it in via that. However, would the scanning capability only reside in the hardwired computer or could I do a network scan somehow?
View 2 Replies View RelatedI've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
I have four PCs in my house that are running opensuse 11.2 and I want to create a home network to share files, scanner and printer.
View 4 Replies View Relatedis it possible to install a netwerk printer, while not connected to the netwerk where the printer is?I installed opensuse on my sisters desktop and I want to install the printer that she and my parents are using at home. Is this possible?De printer is in a windows workgroup and shared. De name of the workgroup is DEROON and the name f the computer the printer is connected to is Nico
View 4 Replies View RelatedTotal Newb here, sorry. I am pseudo-IT at work and have set up a desktop with Debian 5 (accidentally overwrote Windows in the process, but there you go). We are set up with network printers here (all Windows), and I was wondering how to go about being able to print to one of the network printers from my Linux desktop. Can I even connect to the Windows network with this desktop (it is hooked up)? Understand, I do NOT want to screw up anything on the network - they won't let me play anymore if I do. If I download the Linux driver, what do I do next?
View 2 Replies View Relatedi have 3 comps(running suse 11.3) and a laptop(running vista sp2). i have installed samba on all suse comps. i have a printer attached to one of the comps and it has been shared also the internet connection on that comp has been shared. all the computers are connected using lan cables through an ethernet switch. i also have a wireless router which is connected to the ethernet switch.
I am able to view all the comps on the network except the laptop running vista. all the desktops are visible on the network and are able to print and share files on the network and also connect to the internet. the laptop running vista can connect to the internet but its not visible on the network and nor can it share files across the network or access the printer.
I successfully added/shared a network printer in SUSE 11.3 32 bit, but when I try on the 64 Bit box it didn't work out very well.What ports need to be open ? Is it necessary to open port 631 in YAST->Firewall->Advance- >UDP and IPP ?(TCP 631 already open) What services need to be running? Here is the error log :
[16/Dec/2010:19:25:43 -0500] [cups-polld xxx.xxx.xxx.xxx:631] CUPS-Get-Printers failed: Forbidden
XXX is my server IP
I have two Suse un-firewalled computers connected via NFS. About a year ago I found instructions for a very SIMPLE way to share a CUPS connected printer using Yast. When I installed 11.4 I lost the instructions. It required no config file editing and took about two minutes. Google searches focus on complicated SMB-Linux connections like those suggested by swerdna.
View 6 Replies View RelatedMy Operating system is Ubuntu 10-4 that I have just installed.
View 6 Replies View RelatedI've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies View RelatedTAG: Fedora 15 no printersTAG: Fedora 15 Can't find printerTAG: Fedora 15 Can't add printerTAG: Fedora 15 Can't add network printerAfter installing Fedora 15 I discovered that I could not add my network printer to the printers dialog. After some searching in the fedoraforum "Archives" I found a solution that resolved my issue.I am providing this solution in case anyone else has this issue.Close theprinter dialogOpen up terminal
Type sudo iptables -FRe-open the dialog and your network printer should be displayed!If you are not setup as a sudoer then either add your self to the /etc/sudoers or use the following:Type su -Enter root passwordType iptables -F
My home network has 2 Kubuntu machines (mine), a Windows 7 laptop, a vista laptop and a Freecom FSG network storage device which acts as a file and printer server. I bought a Kodak multifunction device as a friend has one and I liked the idea of cheaper printing. It's a good bit of kit, if printing directly from a windows machine via a USB connection but from linux boxes and networked from the win 7 box, it's crap, often needing rebooting before it will print (if it prints at all). Can anyone recommend me a (cheap) printer that will be more suited to linux ? not bothered about photo quality, I'll keep the kodak for that and just connect via usb or plug in SD card directly.
View 4 Replies View RelatedIf this does not qualify as a network question, move it wherever it needs to go.House sitting for a while and they have a Dell 1700N printer on the network. The printer shows up under then Computer->Network->Dell laser printer 1700n, but that is all. Looking under properties just gives me a location of network:///. Cups cannot seem to find it. It would be nice to be able to use the printer. Owners are out of contact for quite a while.
View 4 Replies View RelatedI installed a 'Brother' laser printer on Debian. It works fine. Installation was fairly automatic. I now have another desktop computer using Vista Windows. How do I install the printer on my home network? Is there something I have to do with Debian? The Debian computer has a parallel port for my printer. The Vista computer does not have a parallel port; so I can only use the Debian computer.
View 6 Replies View RelatedI have an Hp officejet 4500 connected on Local Network. I have hplip and cups too. Cups is enabled as service but system refuses to see my printer. I also installed all PPD's. How to make it work?
View 2 Replies View RelatedI have just installed Fedora 14 0n both my laptop and desktop. Everything looks really good so far except I cannot add my wireless printer.
When I try to add a new network printer I get "The password may be incorrect."
I want to install my Epson Stylus CX8400 (on my machine named windows-7) on my server. I'm using the server software so no GUI. I have the printer shared and I'm using Samba. The path to the printer is:
Code:
//windows-7/stylusCX8400
I bought a wireless printer Samsung ML-2525W, now I am trying to add it as a network printer through WI-FI. Is there any way to do it if I use a WEP network, how will printer know the key?
View 3 Replies View Related