Need help on a activating xDSL Connection on machine startup, i have configured the internet through it but every time when machine boots up...it is annoying to activate this interface manually. do guide on this....i am using Fedora core 12...and can you help on the firefox's "work offline" bottle neck.
View 3 RepliesI got the following Error Message when I try to activate ethernet card at et1:
/sbin/adsl-start:line 217: 5839 Terminate
$CONNECT "$@">/dev/null 2>&1.
I have a Fedora machine that was installed with Linux LVM. I took the drive of that machine, connect it to disk enclosure, and connect to another Linux machine via USB connection. I can see that the drive /dev/sda is there:
Code:
[root@dd ~]# /sbin/fdisk -l
Disk /dev/hda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes .....
I want to copy files from this drive. I try to mount it, but it didn't work. The /dev/sda1 is mounted fine, but it has only boot stuff.
Code:
[root@dd ~]# mount /dev/sda2 /mnt/drive
mount: you must specify the filesystem type
How I can mount the drive and copy my files from this drive.
Code...
connection is set to connect automatically using dhcp... used to work, after a latest updates basically stopped working.
I've an Acer Aspire One A110 Netbook running Linpus Lite. All seems relatively well however I've plugged in a Bluetooth USB dongle and nothing has happened - oh well, I didn;t expect it to. Of course I'm used to MS Windows OS plug 'n Play and I know this isn't generally how Linpus Lite OS operates but despite looking around I can't find an explanation on how to activate the Bluetooth adapter. There are instructions and demos on how to add a Bluetooth component to the board but I'm not an engineer, neither professional nor hobbyist, so Im not interested in doing that. I've downloaded the Bluetooth zip file from the Acer Spire One support site it has been installed on the Netbook but there still appears to be no Bluetooth connection.
View 8 Replies View RelatedI am running fedora vm under XP host and using NAT connection to the Internet. It usually works fine, but some time the connection is just lost. I went menu System->Admin->Network and see the interface eth0, but I cannot activate or deactivate. The status is inactive. (when the connect works, the status is active). so I try "ifdown eth0" and "ifup eth0" command, and got
"Error: Connection activation failed: Device not managed by NetowrkManger
The menu System->Admin->Network device control show no interface.
I am not sure what happened.
I am new to linux.Use broadband wire-line internet connection that requires username and password. Using GUI in Administration--Network I see realtek 8129 fast ethernet configured. However when I try to create new connection and activate it, it shows could not activate. eth0 inactive.
I am able to use my broadband connection in windows XP.
I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies View RelatedHow ubuntu 9.10 netbook is36 activate its network connection?
View 4 Replies View RelatedDuring set-up of a home server (running Kubuntu 10.04), I created an admin user for performing administrative tasks that may require an unmounted home. This user has a home directory on the root partition of the box. The machine has an internet-facing SSH server, and I have restricted the set of users that can connect via SSH, but I would like to restrict it further by making admin only accessible from my laptop (or perhaps only from the local 192.168.1.0/24 range). I currently have only an
[Code]....
New to ubuntu. I love the OS. Everything works great except for the network connection. It tells me I need to activate the b43 drivers with fwcutter, but here are the following problems:
1) I can't download and install the drivers b/c I can't connect to the internet wired or wireless.
2) I can't find the website to download the appropriate drivers (I've looked for hours)
3)I'm not too sure how to install them since I don't have a background in coding.
I really like ubuntu, I just need network working.
I can get a tunnel connected via terminal with: openvpn --config client.ovpn
However, when I tried to use the "friedly" gui (gadmin-openvpn-client), it keeps telling me to "import server certificates into client first."
I don't know what that means. Nor, do I see a tun device.
I have recently installed fedora 14 and configured vpn to access my work network. I need to access some windows machines which although I can ping I cannot remote desktop into. When I go to Applications>Internet> Remote Desktop Viewer and put in the machine name (either just the machine name or the FQDN including the domain name) I get an error "Connection to <machinename> was closed".
View 4 Replies View RelatedI'm been wanting to try Ubuntu for a while now, and when my mom's netbook started to get insanely slow with WinXP, I tried the Netbook Remix on a USB stick. I LOVE it, except I am unable to get the wireless working, which is the only thing stopping me right now from a full install.
I believe my problem is that I need to activate the two drivers "Broadcom B43 wireless driver" and "Broadcom STA wireless driver" which appear as unactivated when I go into the hardware drivers admin tools. Unfortunately this netbook (HP Mini Netbook FW376UA) does not have an Ethernet port, so I can't just temporarily hard wire it to activate these drivers.
So my main questions are: 1) How can I activate those drivers without an internet connection?, and 2) Do you think that activating these drivers is indeed the answer to getting the wireless working?
The details:
Machine: HP Mini Netbook FW376UA
Network Controller: Broadcom Corporation BCM4312 802.11b/g
Ubuntu version: Ubuntu 10.04 Netbook
I have a problem with my wifi adhoc network which I previously had under Windows. I go to network connections, edit connection ,wireless,add then change to adhoc then I cannot press the add button as it is not highlighted, I don't want any security so have not enterd any WEP or WPA information, also How do I do a scan for wireless networks/devices in my area?
I have a number of devices plus the chap next door who connects to my wired internet connection using my wifi adhoc network that are unable to do so at present.
I m using redhat enterprise linux 5 desktop
i hav a broadband connection through bsnl dna-a211-1 modem
how to activate the connection into my laptop with redhat enterprise linux5?
I have installed Ubuntu 8.10 Server Edition on Virtual Box. When I start the virtual machine I do not have connection to my home network. The router I have does not assign any IP address to this machine. Now I have some questions which I am finding hard to find answers for over the internet and other forums.
If I do have a network interface (I checked this using ifconfig -a) then is there a command to actually make the operating system connect to that network (something like repair on windows)?? Also what is the difference between a network interface with alias eth0 and eth5? I know that when it was eth0 the virtual machine used to connect to the network automatically. Now that it is eth5 it does not! I do not know however if this is related.
I have a network of 100 machines, all with ubuntu Linux. Is there a limit to the number of machines that can connect to one single machine (at the same time)? For example, can I have 99 of my machines maintain continuous ssh connection to the 100th machine? Can I have every one of my machines (every one of the 100) maintain a continuous ssh connection to all other 99 machines? How much memory does each such a connection take?
View 2 Replies View RelatedI would like to use my S-video connection on my ATI Mobility Radeon x1400 Laptop but I don't know how to do it. Could someone help please? I have never tried to use it before so I cannot tell whether it worked with previous versions.
I am using Natty.
Here is what I get with the command xrand. code...
About a month ago I decided that I would try and revive my long dead PC which, when the original hard drive failed, took out an IDE channel, leaving me with only one. The machine was built back in 2001 (maybe a month or so after XP came out) and is suffering from its age.I was able to install Fedora 12 to its hard drive by putting it into a USB hard drive cage.
You'd think I could just put the hard drive back in the machine and have everything work right? If only. The BIOS is unable to recognize the, for lack of a better term, bootability of the hard drive (it does recognize it, and I have checked the BIOS settings to make sure that it is the primary boot device). I have a reiser card in the machine and I was wondering if it is possible to create a portable bootloader cd that will just boot to the first partition of the hard drive (The reiser card is recognized and it USED to be able to boot directly to it from my BIOS, but no such luck now)
Since I upgraded to 11.2 I don't hear a sound when I boot my computer and I'd like to (the way it was in previous versions). How can I turn it on again??
View 2 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedIn order to get the work done I use a Macintosh Macbook Pro (4,1) with a Boot camp partition running Windows 7.This allows me to use my favorite OS (OSX) with my required work environment (Win7 & .Net) when ever I need them.To allow me smooth usage I use Parallels 5 to virtually boot my Win7 machine from within OSX but whenever I want to do some heavy lifting I reboot into Windows 7 (on boot camp) which allows me to use my laptop's entire resources for my work.
My problem is this: I am now about to begin work for a company in Tel Aviv which uses Linux desktops for development and I need to follow suit. So I've given my self a new Quest: Set up the ultimate web development platform. My goal is this-
1. Install the three operating systems one along side the other - OSX, Ubuntu & Windows 7.
2. Set each one of them up in such a way that allows me to boot into it (meaning I can have any one of these OSs running on its own when I want.
3. Use parallels to virtually boot my Win7 partition - this allows me to keep using Office 2007, which I use often.
4. optional! Use parallels to virtually boot the Ubuntu OS also.
I have managed to complete goal 1 & 2.But I simply can't get 3...In theory it isn't a problem to install windows & OSX along side each other and virtually boot the windows under OSX using parallel's bootcamp virtualizer- BUT - the moment I install Linux along side the other two it break's parallel's virtualizer and it can't boot. I think it is due to parallel's in ability to use GRUB but I'm not actually sure about that.
I am considering compromising and going for a system like this:
1. Install OSX and Ubuntu on the laptop - which means I can boot into each of them.
2. Create a virtual machine for Win7 using parallels.
But that will be a real compromise as far as I'm concerned and I hope to find a way to set up the machine as I described earlier (three OSs which can be booted independently and also loaded in VMs).Just to make sure I'm clear - I HAVE MANAGED to install three independent OSs on the same machine - but that always prevents me from booting them as VMs using parallels...
I installed SW 13.1. Install and config completed without issue. When I attempt to boot, POST completes, and bootup stalls. Only a blinking cursor is visible. Any pointers on how to resolve this/achieve a succesfull bootup?
View 4 Replies View RelatedI'm trying to reinstall FC10 after a foolish mistake I've done that costed me operation of my Fedora partition (uninstalling SELinuxpolicycoreutils).
I have a dual boot Ubuntu - FC 10 machine and delete my old fedora partition with GParted. However when I try to install FC 10 from the live CD using the option "Use free space on selected drives and create default layout" I get the error message:
Could not allocate requested partitions:
Partitioning failed:
The following errors occurred with your partitioning:
You have not defined a root partition (/), which is required for installation of Fedora to continue.
This can happen if there is not enough space on your hard drive(s) for the installation.
Press 'OK' to choose a different partitioning option.
This is the output of fdisk -l :
Partition table entries are not in disk order
My last option is erase everything from my drive including the Ubuntu partition and start over the installation, something that I would like to avoid.
Is it possible to make this automatic, that is, how can I make the server active during the machine boot up?
View 4 Replies View RelatedIm trying to setup a dual boot on my laptop. it had vista installed on it and am having some trouble getting slack ware installed. I have gparted live to partition my drive but am not sure if im using the program properly. I tried resizing my HD before and once I booted the slackware cd, it says i have no linux or linux swap partitions installed:S
View 14 Replies View RelatedRecently, my Mint update informed me it had an upgraded kernel version of Mint 9 and asked did I want to upgrade. Me, not being an old hand at things Linux, upgraded. Instead of overwriting the older version, it put the upgraded version of Mint 9 BESIDE the older one. So now I have, actually, 4 versions of Mint 9 on my PC,(generic plus recovery mode for each) which is dual booted with Vista Home Premium.
I don't want this. I have had weird problems and hiccups since I upgraded. I want to get rid of the newer kernel version and use only the older one. How do I uninstall the upgraded version of Mint 9? I have tried to boot into the older version, but there is no desktop and I have to type on the boot screen and in the terminal. It wants commands I don't know how to give. How do I restore my older version of Mint 9?
I just want one version on my PC in the dual boot with Windows Vista. Can someone tell me how to accomplish this? If you give me terminal commands, please make sure they are copy and paste ready. lol.
If uninstalling involves deleting partitions and doing a manual partitioning and formatting, I'll need easy instructions for that also.
VMware Fusion
RHEL5 Server
After messing about with a vm I need to go into rescue mode and fix the problem I have tried all settings in the CD/DVD window and cannot get a boot prompt Just goes straight to grub I only used the rescue mode on a 'real' host before and had no problem.
I'm running Ubuntu Intrepid on a Dell laptop. I turn it off at night.Every morning when I turn it back on and open Firefox, I have to wait while the machine is busy/freezes for maybe a minute. This usually happens twice, but sometimes three times. The processor light is on solid when it does this.I've run TOP from the terminal, and it says it's XORG that's running.
This only happens when Firefox is running, and when I first turn on the laptop after it being turned off for a while. Every morning, when I first run Firefox, XORG takes control of the laptop. Not a big deal, but frustrating and worrisome.