Lately I have noticed when I am trying to install something I have been getting 'Hash Sum mismatch'
Here is an example when I tried to install Calibre:
root@V-debian:/etc/apt# apt install calibre
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]....
I have been getting a Hash Sum mismatch error on certain packages since Debian Squeeze became stable,
[Code]...
E: Some index files failed to download. They have been ignored, or old ones used instead.
Im trying to update the system packages list by doing "aptitude update", but I got a error like this:
W: Failed to fetch http://download.virtualbox.org/virtualb ... 4/Packages: Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
E: Couldn't rebuild package cache
After searching the Web, I saw that many foruns seems to suggest to erase the reference list of packages using the command " rm -rf /var/lib/apt/lists/" and then run "aptitude update" again. I did that but the error still pops up.
My source.list:
### Debian Jessie
deb http://ftp.us.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.us.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
[Code] ....
apt-get update
W: Failed to fetch bzip2:/var/lib/apt/lists/partial/ftp.ro.debian.org_debian_dists_unstable_main_binary-i386_Packages Hash Sum mismatch
E: Some index files failed to download. They have been ignored, or old ones used instead.
My source.list
#Debian Testing repo
deb http://ftp.ro.debian.org/debian/ testing main non-free contrib
#deb-src http://ftp.ro.debian.org/debian/ testing main non-free contrib[code]....
I have tried installing skype through synaptic package manager, downloading from website through software centre and also manually using apt-get and dpkg. All I get is the same error - hash sum mismatch so file could not be retrieved. have tried the apt-get update and makes same error. not entirely certain what the --fix missing does or how to run it.
Get:1 [URL] [20.2MB]
Fetched 20.2MB in 6min 31s (51.5kB/s)
Failed to fetch [URL] Hash Sum mismatch
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing? I just done successful install for Opera and Thunderbird. just this skype thing I can't seem to sort!
Using Debian Jessie 32 bit and Wheezy 32 bit on 2 separate computers.
For the pass few days, received the following message on both computers when doing a aptitude update or apt-get update results in the following error message:
W: Failed to fetch http://security.debian.org/dists/jes...ource/Sources: Hash Sum mismatch
W: Failed to fetch http://security.debian.org/dists/jes...i386/Packages: Hash Sum mismatch
W: Failed to fetch http://security.debian.org/dists/jes...ranslation-en: Hash Sum mismatch
I am trying to upgrade from 9.10 to 10.04 (upgrade through alternate cd) but getting error ( hash sum mismatch) for some of the packages ,
how i do fix this issue
I used deja dup to backup my home folder today so I could restore it after reinstalling 11.04. now, it starts to restore, but gives me this error every time:
Code:
Calculated hash: ac14ae0a7bf52c1ea0d851cec864df9e1c06b54e
Manifest hash: 4173054c0b0c8ce1154af5b5caae2a7591652765
I keep getting a very frustrating error after reinstalling 11.04 on a 64-bit server:
Code:
W: Failed to fetch gzip:/var/lib/apt/lists/partial/us.archive.ubuntu.com_ubuntu_dists_natty_universe_source_Sources Hash Sum mismatch
which follow
Code:
bzip2: Data integrity error when decompressing.
[Code]...
I originally installed 11.04 on this system with the same disk so I'm confused as to what is happening. I have tried using different CD's and even installed of a USB. The memory test of the installer came back okay. The box has two PCI NICs that are recognized and functioning. The only package I have installed is openssh as this is a headless box. What makes this even more odd is that I have a newly installed 32-bit 11.04 server with the same procedure on the same network and it does just fine.
I hope I have been thorough enough in my search and investigation that someone can point me in the right direction. After reinstalling 3 times I am at a loss and I know 11.04 can run on my box without problem (as it did before the reinstall).Tonight I'm going to reinstall with the built in interface unplugged and the two NICs removed, I'm hoping this will prevent apt from bricking itself during the install, which is the only think left I can think of. I suspect the issue has to do with the nic despite it appearing to function properly I am unable to uncompress the archives in question on, my workstation, when they are downloaded on the sever but can successfully uncompress the same files when downloaded on the workstation.
SOLUTION: I pulled both NIC's and enabled the integrated interface and it is all working. I wonder why they didn't work though...
Ive been experiencing problems with my squid3 recently, i am using 10.04.3 LTS. Configured squid as always have been configuring since 8.04.04, but its not working as it should be.Ive been having issues with bz2 files, in my LAN when i try to do an apt-get update, it just says some indexes could not be downloaded cause of a sum hash mismatch.If you check squid log, for that kind of file it saysTCP_REFRESH_UNMODIFIED/206 Google around i read thats ssquid cache keeppin the files more than usual, so i add this hoping to solve the problem:refresh_pattern -i .bz2$ 0 0% 60 override-lastmod refresh-ims override-expireI dont know if thats well written or not, but it doesnt have solve the problem, and now squid log shows,TCP_REFRESH_UNMODIFIED/304but the same behaviour of the hash sum mismatch, please if someone could throw a ligth in here. The only fix to this problem so far is deleting all cache and recreate it every morning, which is far from a solution.
View 1 Replies View RelatedI was creating an OpenGL+GLUT+Perl Simulator, and I got this error on starting it:
Error: API mismatch: the NVIDIA kernel module has version 195.36.15, but this NVIDIA driver component has version 195.36.24. make sure that the kernel module and all NVIDIA driver components have the same version. The app still works fine, but I have no clue what to do about this.
/var/log/syslog is full of messages
/etc/gdm3/Xsession[3408]: ![1433316153,000,xklavier_evt_xkb.c:xkl_xkb_process_x_event/] #011ATTENTION! Currently cached group 0 is not equal to the current group from the event: 1
What this means and how to fix it?
I just upgraded my system from wheezy to jessie. For the most part, the upgrade was painless, but there's one bit of weirdness that I can't seem to fix on my own.
In my .Xdefaults, I set the font for Emacs with this line:
Code: Select allEmacs.font: -misc-fixed-medium-r-normal--13-*-*-*-*-*-iso8859-1
When I do this, however. the font that appears in Emacs is not any misc-fixed font. See the following image for what Emacs displays. The window for xfontsel shows what font it should be selecting.
Note that both emacs23 and emacs24 (both Debian packages) exhibit this behavior. I also see it with an installation of emacs24 that I compiled myself.
If I use xlsfonts to see what's available matching this pattern, four choices are presented:
Code: Select all$ xlsfonts | grep 'misc-fixed-medium-r-normal--13-.*-iso8859-1$'
-misc-fixed-medium-r-normal--13-100-100-100-c-70-iso8859-1
-misc-fixed-medium-r-normal--13-100-100-100-c-80-iso8859-1
-misc-fixed-medium-r-normal--13-120-75-75-c-70-iso8859-1
-misc-fixed-medium-r-normal--13-120-75-75-c-80-iso8859-1
If I change the font-spec in Emacs to specify one of the avgWidth parameters (70 or 80), then Emacs displays the correct font. Note that with this spec, Emacs's choice matches what xfontsel displays.
With avgWidth 70:
With avgWidth 80:
Why Emacs is using the wrong font family when the avgWidth is set to "*". As I understand X font strings, using "*" should make it pick either 70 or 80, but it clearly isn't doing that. A "*" worked with wheezy, so I'm assuming the upgrade changed my font configuration, but I don't know what it might have changed.
This my scenery:
1 pc windows 7.
1 pc linux debian jessie.
From jessie, mount a share folder in windows 7, in this way: mount -t cifs //windows7/sharefolder /mnt/windows7 -o user=pychi,password=mypass,uid=pychi,gid=pychi
And work fine, the user pychi and root, copy to windows share folder perfect and fast, but the big problem is:
when i copy a big folder, example 40 gb, after 30% or similar, stop the copy, and this is a list of different errors:
- It's not possible change file proprietary on destiny.
- not enough space
- can't fix attributes, date, time, proprietary, group.
I recently upgraded from wheezy to jessie and everything went as planned with dist-upgrade. However I just noticed that I can't play any video file. I thought about upgrading vlc, as it was already installed but it had dependency problems. So I tried to remove it
Code: Select allsudo apt-get remove --purge vlc
Then If I try to install vlc I receive this message:
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may resolve the situation:
The following packages have unmet dependencies:
vlc : Depends: vlc-nox (= 2.2.0~rc2-2) but 2.0.3-5+deb7u2+b1 is to be installed
Depends: libvlccore8 (>= 2.2.0~pre1) but it is not going to be installed
Recommends: vlc-plugin-notify (= 2.2.0~rc2-2) but it is not going to be installed
Recommends: vlc-plugin-samba (= 2.2.0~rc2-2) but it is not going to be installed
Breaks: vlc-nox (< 2.2.0~pre2-2~) but 2.0.3-5+deb7u2+b1 is to be installed
E: Unable to correct problems, you have held broken packages.
Now, I thought about removing vlc-data but I received this message saying that 253 packages will be removed (624Mb worth of applications). Am I uninstalling my entire system with this?
This is my sources.list
deb http://ftp.us.debian.org/debian stable main contrib non-free
deb-src http://ftp.us.debian.org/debian stable main contrib non-free
deb http://ftp.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.debian.org/debian/ jessie-updates main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
I'm running
3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
Running aptitude offers to remove this 260+ packages, so I'm not happy with that.
m trying to install xrdp on Debian 8, I have attempted it with the following commands run under root:
Code: Select allapt-get update
apt-get upgrade
apt-get install xrdp
Everything installed fine, with no errors
Code: Select allroot@tom-deb:/home/user# apt-get install xrdp
Reading package lists... Done
Building dependency tree   Â
Reading state information... Done
[Code] ....
Now from windows using Remote Desktop connection, an attempt was made to connect remotely, I can see xrdp working just fine, but when I am logging into xrdp-sesmanx11 with the username and password, it exits out suddenly, are there other packages that need to be installed?
I am new using linux and don't have too much experience in terminal, however I am curious and work hard. I have an imac G5 powerpc with 2g processor, 768 mb ram and 232.7g hard disk. I recentrly installed debian 8.0.0 (jessie) with xfce environement. I have three other computers (two with xununtu runing and one with windows) using dropbox to sync all my work in differents places, so I use dropbox to get all synchronized. I don't want to change all the pc's to other cloud service, I would like to install dropbox in this machine.
I installed libnet-dropbox-api-perl, pear-channels and pho-dropbox packages from the synptic package manager with the hope to use dropbox...but I dind't even find something colled dropbox in the pc.
My question is: is it possible to install and use dropbox in this powerpc machine ? if yes, is there a tuto (for dumps) to get it ?
I am a experienced Windows person and my roots go back to DOS and the first version of windows. I am pretty good with computers but have little to no experience with Linux or Unix. About 30years ago I managed to make a painful transition from DOS and xTree Gold to Windows 3.1. Now I am leaving Windows behind forever...
I have installed Debian Jessie from a DVD that was made with the debian-8.1.0-i386-DVD-1.iso.
I have it installed and running with the Gnome desktop and now want to use the KDE desktop. As I understand it I have the files for the KDE desktop in my install and I see some KDE files the in the Packages app. But I don't know what I have, where it is, or how to use it.
I just cannot figure oout how to get the KDE desktop installed and running. If it is practical I would like to keep Gnome for now, switch to KDE as the defaultdesktop.
I have spend some hours googling and searching this forum and cannot seem to find anyting on switching or changing desktops from and with the Jessie install.
And if it can be done from Gnome that would be easiest for me because I am not much of a command line person yet and don't have a manual for doing that yet. But can use a terminal and enter commands if they are stated.
I'm trying to install KDEConnect on my 64 bit Debian system. It's failing because of dependencies.
Tried installing the first dependency, sshfs. It said it cannot find the 64 bit package. So, I tried the 32 bit. That one depends on fuse. Tried to install fuse 32 bit. hat depends on sed. Tried installing 32 bit sed, but the package manager said it's risky to replace 64 bit sed with the 32 bit variant.
I stopped here thinking that I'm risking some stability and the road to the finish line is not visible till the end, meaning I might lose hours trying to do something that fails at the last step. This happened to me few times in the past (with other software) and I really don't want to repeat the incident. I need a stable system and I need my time.
The question is: how to get installed kdeconnect package on Jessie 64 bit ...
I'd like to have acestreamplaer installed in jessie, but I am not able to do it....
I tried with
Acestream repos:
deb http://repo.acestream.org/ubuntu/ saucy main
But I cant install it, I got this
acestream-player-data : Depende: libavcodec53 (>= 4:0.7-1) pero no es instalable o
libavcodec-extra-53 (>= 4:0.7-1) pero no es instalable
Depende: libavformat53 (>= 4:0.7-1) pero no es instalable o
libavformat-extra-53 (>= 4:0.7-1)
Depende: libavutil51 (>= 4:0.7-1) pero no es instalable o
libavutil-extra-51 (>= 4:0.7-1)
Depende: libdvbpsi7 (>= 0.2.0) pero no es instalable
Depende: libupnp4 pero no es instalable o
libupnp3 pero no es instalable
Depende: libx264-120 pero no es instalable
after installing thunderbird my computer was unable to load linux (fedora 13) while loading it reaches the blue screen with logo and halts. it didnt respond to any button. then i went to a single user by Ctrl+Alt+F1 because im a total newbie and thinking that video driver is missing, i installed nvidia using yum! but the problem remains. now entering startx gives:
API mismatch: the nvidia kernel module has version 195.36.24, but this nvidia driver component has version 260.19.12. there is always this error: no display specified/etc/X11/xorg.cof file has Driver "nvidia" in the Section "Device", but it is supposed to be "nv", because it was so previously. manually editing this doesnt help.
1). is it possible to "unyum" what i did and get back the driver i used to have? 2). how can i get the display working? 3). were there any known to you cases when thunderbird could mess up display drivers?
we have postgresql database in our server. when i tried to install our application it throws some error like "org.postgresql.util.PSQLException: ERROR: encoding UTF8 does not match locale en_US Detail: The chosen LC_CTYPE setting requires encoding LATIN1". the locale which is set in our server is
[code]...
I don't know how to approach to solve this error.
I installed Jessie day before yesterday on a freshly formatted partition. After a random time, it hangs. If I am playing music at the time, the music continues for a few more seconds _after_ the mouse and keyboard become unresponsive, if that is useful.
Sine I did not understand how to pick the desktop during the installation, I installed Gnome. Afterwards, I installed KDE. Now I have a lot of Gnome stuff around I don't really need. But they are in principle compatible, right?
This morning, the hang was almost immediate after logging on. Only Iceweasl and Amarok and a Konsole were running. I attempted to start Icedove, when everything hung.
Here is the relevant part of the syslog.
Dec 8 07:41:38 jon-desktop rsyslogd:
[origin software="rsyslogd" swVersion="8.4.2" x-pid="775" x-info="http://www.rsyslog.com"]
rsyslogd was HUPed
^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^
[Code] .....
My clock said 07:41 at the time of the hang.
What does it mean by flashplugin-nonfree 1:3.6.1 ? What does 1:3.6.1 mean? What's the version of flash player? How can I install latest version of flash player? Websites say outdated flash player. What to do?
View 13 Replies View RelatedI have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?
Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
[code]....
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies View RelatedSomehow got it partly to work. I have a new installation and I am using the 4.1 kernel now. I can switch on the Radeon chip which is great, but still have some trouble when trying to turn it completely off.
I have an Acer Aspire 4820TG Laptop with:
Core: i7-640M
integrated graphics: Intel
discrete graphics: Radeon Mobility 5650HD
I have installed Debian Jessie. After installing the non-free firmware for my ATI chip (following [URL] .....) so I could use vgaswitcheroo, the system broke.
The problem looks as follows: When I start the system the graphical login screen gets stuck and the console tells me first:
Code: Select allradeon 0000:01:00.0: Userspace still has active objects!
then a lot of numbers, then
Code: Select allradeon 0000:01:00.0: ring 5 stalled for more than 10000 msec
[drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
[drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).
and this repeats once (or twice?) until several new messages arrive.
Those pause at
Code: Select allFixing recursive faul but reboot is needed !
Then again lots of more error messages until the everything freezes, with the last message
Code: Select all---[ end trace 13dfd971ff8e0aed]---
(Might contain typos. I don't know how to get the whole messages since the system dies a minute after booting and I only have a few seconds after the error messages start)
Even when I prevented the xserver from starting at boot I still got the same problems.
I would very much like to be able to switch between my chips, because I can only use external monitors when the ATI chip is active, but I would also like to be able to use the battery saving internal chip option.
I also tried to install the proprietary driver (though I would prefer if I didn't have to do that), but I couldn't get the xserver to work while it was installed.
lscpi output:
Code: Select all00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
[Code] ....
Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?
View 9 Replies View RelatedI have noticed that when installing Jessie, the graphical installer downloads updates to packages while installing if connected via Ethernet to the Internet. Remaining disconnected solves this problem. Is there any way to avoid this and install without downloading files other than apt lists?
View 3 Replies View RelatedI have been using linux for about a year and have run into a new problem I am unable to solve. It started when I attempted to install some packages I needed to get VirtualBox to run VMs. I am on Jessie.
I am unable to install various packages, including gedit, aptitude etc. I do not think it is a problem with my sources.list as my laptop has the same sources.list and I am not encountering the same problems on it. Packages will not install any dependencies. -f install isn't doing anything for me.
My sources.list...
deb [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb-src [arch=amd64,i386] http://ftp.ca.debian.org/debian/ jessie main contrib non-free
deb http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
deb-src http://ftp.ca.debian.org/debian/ jessie-updates main contrib non-free
[Code] ....
I tried to check for held packages with
userone@localhost:~$ dpkg --get-selections | grep hold
But get nothing.
sudo apt-get install -y