Under Debian "Expert Installation" once I have chosen installation/system language and location, I get an informative notice, that:
Code:
There is no locale defined for the combination of language and country you have selected.
..and I need to choose one locale available for the selected language. As I understand, locale is just a set of environmental variables used by applications and printed out with locale command?
In addition, is it possible to generate own locale files after the installation, which will match my needs?
Maverick 10.10 is unable to create Japanese locales on my wife's laptop (Acer Aspire 3000). This machine previously had no such problem. The install is a fresh install, since the machine froze during the upgrade (no fault of Ubuntu's). A possible complication is that it froze several times more during the install, and I have gone through many recovery boots and iterations of dpkg configure. All relevant packages are installed, I believe. Everything else works. Through System, Administration, Language Support, I have installed all components of English and Japanese. Currently English is selected. Japanese should appear in the list but does not. Japanese text appears properly, and I can write in Japanese,But all the menus are in English. Fine by me, but my wife will want Japanese when she uses the computer again (not soon).This mostly likely is a glibc/libc6 problem, as far as I can tell. I can't find any other Ubuntu user with this problem recently.And now, some outputs:1. dpkg-reconfigure locales
I don't really like Los Angeles (they steal all our water) and neither Tijuana nor Vancouver make sense to me, so I am trying to make my own, custom timezone of Felton, California. How do I do this? I changed my /etc/timezone to "America/Felton" but upon reboot my calendar still says "Los Angeles". Which files do I need to change?
I am using uuntu 8.04 and I am trying to make live cd with running kernel. I know that there is documentation in ubuntu website in "how to make live cd" but the thing is this is my custom kernel. I have my own configuration. So I want this kernel to be work in live cd.
I have been able to successfully build a live Linux CD, the problem is during the course of setting up my new linux instance on my latop I had to install a few items (intel drivers). So got all the files and everything worked after manually installing, but wanted to try to rebuild the CD with all the files in the CD, rather than having to use a USB drive to put the file onto my laptop. When I made the changes to the configuration that I previously used(just edited the chroot file and did lh_build again) nothing happened the binary was no rebuilt. So some questions: If I am wanting to add files into a live CD build how do I do this? How do I rebuild a CD? or Is it possible? (i.e. I have to continually start from scratch each time).
I need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?
I recently installed language packs for Japanese and changed my system language to it, too. The problem is, now that I try to go back to English, the locale doesn't change back, only the menus are in english. "Apply system wide" in the Language Support didn't do anything; Firefox is in japanese too. Here is my locale output:
When I open gedit and also some other applications, I get this message:(gedit:29595): Gtk-WARNING **: Locale not supported by C library.Using the fallback 'C' locale.Why is this happening and should I worry about it? It does not seem to affect my subsequent work.
how to make a live cd how can I put it on a usb stick. [URL] Also in the article you install skype etc. but where did they get the path to donload skype etc. I might want to add more software.
On Slackware64 13.1 the as-installed en_GB locale gave Sunday as the first day of the week. This was not an issue until Xfce's Orage calendar was used when its display of Sunday as the first day of the week was offputting for someone used to Monday. A minor inconvenience but expected to be easy to fix.
At the command line: Code: c@CW8:~$ export LANG=en_GB <== same for en_GB.utf8
I recently moved from gnome to xfce in my arch linux box. After I added greek to keyboard layout some applications like skype, openoffice and vlc changed their menus in greek characters. English language but greek characters! Anyone got any idea what can I do with this one?
In accordance with directives - possibly misunderstood - I have reconfigured the Debian "locales" package; I changed the installed locale from en_US.ISO-8859-1 to en_US.UTF-8 and left the default locale for the system as "none". So far so good. In my ".bashrc" file, I have an entry for "LC_LANG".
If this entry is set to "en_US.ISO-8859-1" all my texts are readable on the console but I get warnings like: Gtk-WARNING **: Locale not supported by C library. Using the fallback 'C' locale If I change the LC_LANG entry to "en_US.UTF-8", I no longer get these warnings but the screen-display of Midnight Commander (mc) is a real mess. And even man-pages are no longer able to display hyphens (-) correctly.
for a project I am working on, I need the same install configuration on every machine, and I'd like to have all the packages I need on one disc, with none of the ones I don't. I also need to use a non-standard file systems(jffs2,nilfs) as the hardware end of my project works on flash memory, and would like these two FSs to replace the typical magnetic disk based choices.
I know you can make a custom livecd using remastersys, but is there an app within Ubuntu that would perform the same function without having to install a third party app?
I would like to take say, CentOS5, customize it to my needs, then make an installer ISO for it.Basically I'd like it to be a next next next install, and it has everything already in it like sshfs, basic config files, and other custom stuff preconfigured. I tend to do all these things manually every time I install, and I'd like to just automate it all, and also not have to depend on an internet connection each time. How would How would I go about doing that? I don't want to just take a disk image, since then I'm restricted to that platform. I still want it to be a true installer.
I need to make a custom ks.cfg DVD for my centOS 5 install. I figured I would download the 5.4.iso. My question is will packages from previous version of centOS 5.0-5-3 work with my 5.4 centOS image?
I try to change locale for a program to run my native language with root. I don't know what I made, but can't open gui programs from konsole with root account.
It appear this error:
Code:
When type locale, it appear:
Code:
Yesterday I make run level 4 to skip typing startx in console, and login directly to KDE.
I am using ubuntu 8.04 and i am trying to make iso image cd with running kernel. i know that there is documentation in ubuntu website in"how to make live cd" but the thing is this is my custom kernel. i have my own configuration. so i want this kernel to be work in live cd.
What are the best ways to make the kernel using git, and localmodinfo. and optimizing the kernel the best way on a laptop I have, which is a desktop laptop, so it is never really unplugged. Has a core 2 duo 2.53Ghz, 4GB DDR3 RAM, and an ATI HD 3870 GPU.so what things other than the obvious core 2 cpu type when making the kernel. It's on Ubuntu 11.04 64 bit. I also want to create it with the local mod info. and Also create this into a .deb package so it may be saved.
i am working on developing a very minimalistic os based on a striped down linux kernel and for the user interface ive come up with a bunch of custom graphics and such and then i was confronted with the problem of what window manager do i use....
basically my concept for the ui is windows that only open fullscreen (so no resizing, minimizing, moving) btu when you want to change threw applications it displays everything in a coverflow style and im planning on using the Qt toolkit for the interface itself and basing alot of it on web technology's.
I installed Fedora 11 on a server with 2 equal sized disks. I used the gui installer and didn't make custom setting changes to the partitions. One of the steps asked for me to choose the disks i wanted to use for this installation. I selected both disks and after the installation Fedora only sees one volume the size of both disks combined.Do I now have software raid0 or do I have something else?
I'm new to linux and recently installed openSUSE 11.1 on my Lenovo Thinkpad SL500. So far it's great... only problem is the hotkeys and brightness control don't work. Digging around online I found this "experimental" driver that purportedly works fine, but I have no idea how to compile, install, or otherwise use it. Here... tetromino's lenovo-sl-laptop at master - GitHub I'm not sure what to do with the makefile and C file provided. For example, what do I do with this instruction...
"To enable the brightness control, load the module with the "control_backlight=1" module parameter (i.e. insmod lenovo-sl-laptop.ko control_backlight=1 )" I know someone on here will be able to explain how to do this in a "computer engineering for chemists" language! I'm comfortable enough working in the terminal with commands, but have found no real straightforward explanation of how to do so (only "programming" experience is MATLAB m file writing).
I am trying to do Multi_key composition...But not able to find which is my character encoding scheme under /usr/share/X11/locale/ I have several direcotries under this folder...How can i come to kno which is my character encoding scheme..Any command for this ?
I am wondering how to add a need to restart notification in a Debian package, so upon installation, it'd pop up something to tell the user to restart the computer for changes to take effect. Perhaps something like what happens with some packages through the update-manager when it prompts the user to restart for the changes to take effect.
Is there any way to do that? Perhaps adding something at the end of a "postinst" file?
Thinking about it, I could just add something like this at the end of the "postinst" file:
Code: notify-send -t 86400000 -i /usr/share/icons/gnome/32x32/status/info.png "Please restart the computer for all changes to take effect."
It'd work, but not as well. For instance, if the person isn't by their computer at the time.
Another option could be using a Zenity dialog box. That might work. Though, if done, wouldn't a yes/no question box keep the actual package from technically finishing until the user would select yes/no to restart?
I'm currently trying to make a script to rename all the files with one provided file extension to a second provided file extension. I've achieved this by commanding "sh newext doc txt" with the following which works perfectly:
#!/bin/sh for f in *$1; do mv "$f" "`basename "$f" $1`$2"; done;
However, I'd like to be able to modify what I've written so far, so that I can choose whether to convert file extensions in a subdirectory or not. For example, I could enter "sh newext -r doc txt" and the subdirectory's files would also be affected by my script, or enter "sh newext -n doc txt" which would only affect the directory I'm in.
I have some confusion about one of my partition and the space it is taking. df -h output is given below;
# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/ddf1_ADVDTARTINGp1 494G 18G 452G 4% /
[code]....
above information is showing that /var/lib/mysql partition total size is 379 GB and it is 68% used. However when I execute command du -sh /var/lib/mysql it shows following output.
# du -sh /var/lib/mysql 45G /var/lib/mysql
Now I want to know what files are taking space to make the partition 68% used. I want to list down all files in that partition with size.
