Fedora :: Modules Not Being Compiled With 14 Kernel Compile?
May 8, 2011
I am attempting to compile the linux-2.6.35.13 kernel from kernel.org to use with an installation of Fedora 14 (2.6.35.11-83.fc14.x86_64). I've done this before with different kernel versions for older versions of Fedora, but I've encountered a new problem this time. Whenever I get to the "make install" step, I get the following:Quote:
sh /home/user/testing/source/linux-2.6.35.13/arch/x86/boot/install.sh 2.6.35.13 arch/x86/boot/bzImage
System.map "/boot"
[code]...
View 5 Replies
ADVERTISEMENT
Nov 25, 2010
I have installed VMware (VMware-Player-3.0.1-227600.x86_64.bundle) on my laptop. When I open Vmware from Applications/System Tools/VMware Player.I get a window that says: VMware Kernel Module Updater Before you can run VMware, several modules must be compiled and loaded into the running kernel.When I click on install and after putting in my passwd.a window comes up with a list:
Compiling:
Virtual Machine Monitor
Virtual Network Device
VMware Blocking Filesystem
Virtual Machine Communication Interface
VMCI Sockets
But it just try the first one and show an error (window) that says.unable to build kernel module see log file /tmp/vmware-root/setup-9572.log for details.I cannot even go into the folder vmware-root because it says I do not have permissions even though am an administrator.
View 9 Replies
View Related
Sep 21, 2010
im running suse 11.3_x64 clean install along side with Win7 Pro _x64 had a big fight installing Vbox 3.2.8 PUEL edition but i need to test some VMWare products like 'VMWare vShpere (ESXi 4..0.1 - which i couldn't install in a vm in Vbox) ' before putting it in production enviroment in some of my clients. version: VMware-Workstation-Full-7.0.0-203739.x86_64 The installation of vmware was quite simple with no errors. the problem kicks in after the first reboot when i try to run it. before installing vmware i installed the following:
[Code]..
When i try to run vmware workstation the 1st error kicks in: Before you can run vmware, several modules must be compiled and loaded into the running kernel:
[Code]...
View 9 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Jan 22, 2011
i couldn't find anything on google. So here is my problem: It's Debian GNU/Linux. I installed apache2 a few weeks ago, but due to some work I couldn't go on installing further things. Today I installed php5 and mysql. Everything seemed to work fine. I loaded an existing MyBB Board and WordPress Site onto the server and imported the mysql db. I can open the sites and login. However, there are problems. I think my problems are due to the compiled modules. Some are missing. I checked several sites. They all give me this listing:
Code:
apache2 -l
Compiled in modules:
core.c
mod_access.c
[Code]...
What should I do? How can I get the missing modules? Do I have to install apache again (how? remove - install? install what?)? Step-by-step instructions would be kind, because I don't know a lot about unix systems.
View 3 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Jul 13, 2010
We are running SLES 10.3, I am running Novell's support advisor and it is reporting some old hardware that is failing on bootup, one being a QLogic card and another being flex net network adapter. I was looking around for where the file or directory is that holds the list of modules to be loaded when compiling the kernel but SLES does not seem to match other Linux distro's, at least from the other posts I read for where to find these.
View 3 Replies
View Related
Nov 29, 2010
i want to compile the vanilla kernel 2.6.37-rc3, but i want to obtain a .rpm file. I found this guide long time ago (i used it many times) but it use src.rpm package and the contained kernel.spec file have many lines for adding patches. Someone know where can i download a kernel.spec for vanilla kernel or a guide to obtain an rpm file
View 4 Replies
View Related
Jul 4, 2009
How do I get modules in the Kernel to load automatically at boottime? I''m specifically trying to get i810fb to load during the boot process. In Ubuntu, I just had to edit a file and update my initramfs. How do I do this in Fedora?
View 5 Replies
View Related
Mar 26, 2011
The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
View 2 Replies
View Related
Nov 6, 2009
I compiled my kernel, compiled scsi support into kernel, used the new kernel and initrd, the boot failed.Then ,i unzip my initrd, found that sd_mod.ko can't be insert, i added it manual, and reboot OK.so, why! in the kernel configure , the sd_mod.ko is set to <M> , but why it can't be found in initrd?
View 1 Replies
View Related
Aug 4, 2011
System. fedora 15, fully updated Kernel 2.6.40-4.fc15.X86_64
64 bit. Gnome 3
The other day I installed VMware Player on the system when the Kernel was 2.6.38.8-32.fc15.x86_64. On running VMware player after installing the kernel-headers and gcc files the program ran fine (I did not try to install the VMware Tools). I also have not loaded the guess OS as yet.
toady I did and update in which the kernel was updated. I checked to ensure the Kernel-headers were also updated for the latest kernel.
After rebooting the machine the running kernel was then 2.6.40-4.fc15.x86_64. I then tried to start VMware Player. It indicated because the kernel was changed it needed to install new kernel modules, OK, It open the module screen and then crashed.
The log says it can not compile Vmmon which is the first module. it does not go any further.
Tried to installed a new copy of VMware Player over the old one but this only resulted in the same error messages.
Any ideas on how to fix this.
View 13 Replies
View Related
Mar 19, 2010
I wanted to try installing the Metisse window manager, and it depends on Nucleo. I got Nucleo from the AUR, but it fails to compile:
Code:
PNGenc.cxx: In function �void nucleo::png_memory_write_data(png_struct*, png_byte*, png_size_t)�:
PNGenc.cxx:38: warning: �png_struct_def::io_ptr� is deprecated (declared at /usr/include/libpng14/png.h:1125)
PNGenc.cxx:38: warning: �png_struct_def::io_ptr� is deprecated (declared at /usr/include/libpng14/png.h:1125)
PNGenc.cxx: In function �void nucleo::png_memory_read_data(png_struct*, png_byte*, [Code].....
View 14 Replies
View Related
Feb 25, 2011
I need to modify fs/open.c and fs/read_write.c to make my modifications. I cannot find any options in 'make menuconfig' to make these files modules rather than compiled elements. I'm thinking these cannot be modules because the file system won't work without open.c and read_write.c. Is this correct - I cannot compile fs/open.c and fs/read_write.c as modules, only as compiled elements? Or, is there some way for a module to overwrite these routines when the module is installed and re-enable the routines when the module is removed?
View 3 Replies
View Related
Dec 14, 2009
how can I check if my machine have the kernel-modules to mount NTFS? Running FC12
View 2 Replies
View Related
Feb 1, 2010
I've got a wireless card and would like to make a driver module for it from the ralink tarball. Here's the details:
1. The Asus PCI-G31 uses the RaLink RT2561/RT61 802.11g chipset.
Code:
lspci
<some output omitted>
04:03.0 Network controller: RaLink RT2561/RT61 802.11g PCI
2. I am using the latest driver download from www.ralinktech.com which is
2009_0123_RT61_Linux_STA_v1.1.2.3.tar.bz2
3. I followed the documentation and I think it makes a script. Here's part of the README from the tarball.
Code:
Build Instructions:
1> $tar -xvzf RT61_Linux_STA_Drv_x.x.x.x.tar.gz
go to "./RT61_Linux_STA_Drv_x.x.x.x/Module" directory.
2> $cp Makefile.4 ./Makefile # [kernel 2.4]
[code]....
View 3 Replies
View Related
Jul 22, 2011
I downloaded and installed successfully vmware workstation 7 on my computer. but now when I run it it ask for kernal headers of linux kernal 2.6.38-10-generic, some C files it is looking for to compile its modules. I have searched the internet for the location of the files but I have not been able to. where are these linux headers stored in Ubuntu 11.04
View 4 Replies
View Related
Feb 10, 2010
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
View 7 Replies
View Related
Jan 31, 2010
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
View 14 Replies
View Related
Jan 1, 2010
i tried to compile linux kernel 2.6.31 on Fedora 12: the make , make modules and modules install ran successfully but problem with make install while trying to create image it looks for mkinitrd command which is not available i downloaded and installed the mkinitrd pckg and make install was now successful i got kernel img and initrd img in /boot
also grub was updated properly but i m not able to boot up the new kernel the problem the initrd seems to be and uknown type file to fedora core and the current kernel has initramfs img with a .cpio extn instead of initrd
View 3 Replies
View Related
Apr 5, 2010
so my problem is how to recompile my kerenl with TUN/TAP driver,i got how to compile the kernel with TUN/TAP driver every thing is going OK, when i run the commends , just in the last commend when i reboot my laptop i choose grub to enter on new kernel , but when i choose it , i got black screen .so please help me to solve this problem , for more information about my laptop , i have just one partition my root is (hd1,1). my ram is 2G, speed 2GHZ, i use Linux-2.6.27.42, but the new one is the last kernel available in website. i am in rush please inform me as soon as possible,
View 10 Replies
View Related
Jul 6, 2010
i have downloaded .src.rpm file from net.i dont know how to compile that.can u tell me the basics of linux kernel compilation.how to compile a kernel. how to install or modify the existing running kernel with tat. etcI am using fedora 12 it has 2.6.31.5-127.fc12.i686.PAE
View 5 Replies
View Related
Feb 14, 2011
i was trying to install kernel 2.6.29.1 on fedora 14 but it is giving error. First download a package with kernel and i saved in home/user/linux. Afterwards i can extract this package.
1.tar -xvzf linux-2.6.29.1 -C /usr/src
2.cd /usr/src/linux-2.6.29.1/
3.make menuconfig
4.make
5.make modules_install
6.make install
after above steps i got this error.
ERROR: modinfo: could not find module ip6t_REJECT
ERROR: modinfo: could not find module nf_conntrack_ipv6
ERROR: modinfo: could not find module ip6table_filter
ERROR: modinfo: could not find module ip6_tables
ERROR: modinfo: could not find module ipv6
ERROR: modinfo: could not find module fuse
however it gives initramfs,vmlinuz-2.6.29.1 and System.map-2.6.29.1 in /boot folder and menu.lst in /boot/grub is updating according to new kernel. when i reboot my machine and selects the kernel 2.6.29.1 it shows FATAL:kernel too old [1.591633] Kernel panic-not syncing:Attempted to kill init
View 6 Replies
View Related
May 13, 2010
i want to compile Moxa (5100) driver in Fedora 12 , kernel <= 2.6.30 but now when i run command i see this error :
Code:
ln: creating symbolic link `libssl.so': File exists
make -C /lib/modules/2.6.31.5-127.fc12.i686.PAE/build SUBDIRS=/home/AAA/moxa modules
make[1]: Entering directory `/usr/src/kernels/2.6.31.5-127.fc12.i686.PAE'
CC [M] /home/AAA/moxa/npreal2.o
/home/AAA/moxa/npreal2.c: In function �npreal_open�:
/home/AAA/moxa/npreal2.c:1000: error: implicit declaration of function �task_session_nr
make[2]: *** [/home/AAA/moxa/npreal2.o] Error 1
[Code]...
View 9 Replies
View Related
Jan 17, 2011
I compiled the kernel 2.6.36.I want to remove it.How sholud i proceed?
View 1 Replies
View Related
Dec 9, 2009
I am trying to replace just the kernel (no modules) for my default kernel on FC 11. I use the default .config file and just change a few things and then run the make command. After I replace the kernel and reboot the system the password comes up for the encrypted filesystem and it does not take my password for some reason. what I need to do to get this working?
View 1 Replies
View Related
Jun 29, 2011
Im using a Fedora 15 and im trying to compile a 3.0.0rc5 kernel. but im unable to get a config for my machine to boot up. i tried make localmodconfig it says
using config: '.config'
capifs config not found!!
Restart Config
and then i tried cp /boot/config-2.6.38.6-26.rc1.fc15.i686.PAE .config to override the default config but stil that doesnt work. work around to get a proper config so that i can boot the latest kernel here?
View 1 Replies
View Related
Apr 29, 2010
I thought I would give some instructions on how I compile my kernels. My long-time windows user parts trader recently asked me how to compile a kernel on Fedora. He was confused with all the tutorials requiring you to build an RPM, so I showed him how I do it, the standard/easy/lazy way. Before I start, here are a couple things I assume. I assume you are a Fedora user and that you are NOT in text mode, but in GNOME. I also assume you realize that this can take up to SIX HOURS on an old Pentium 3 1.3Ghz. Remember that some proprietary drivers as well as some free ones are not included in the kernel, so make sure you don't delete your existing one.
First get the dependencies you need.
su -c "yum -y install gcc ncurses-devel"
Next get the kernel source. I use 2.6.33.3 as an example. To download it, click here.Extract it by right-clicking on the file and then choosing extract here. This will take about five minutes. Now open a terminal, become root, and cd to the directory linux-2.6.33.3. It is important to cd here and not to the kernel directory inside of there, even though make has an extra variable that specifies there.
Now we need to configure the kernel before we build it with make O=kernel menuconfig. It will take a couple minutes to set up, then you will be presented with a cheap psuedo-gui in your terminal. Just select exit and yes to save your config. You usually don't need to change anything here.
Ready to compile and install? Remember this can take up to six hours, and your machine may become VERY slow. It is not recommended that you attempt to use your machine with this in progress. OK then. As root, in the same directory, type:
make O=kernel && make O=kernel modules_install install. This will compile the kernel and install the kernel and it's modules. Done? Now change the kernel and initrd in your bootloader to match the new kernel. If you ever want to reuse the same source code folder, use make mrproper to clean things up and build it again.
View 6 Replies
View Related
Apr 13, 2009
I am very much a Newbie to Linux/Fedora. Just installed Fedora 10, but having some problems with hardware driver recognition, particularly a wireless network PCI card. ndiswrapper is looking for a kernel in usr/src/kernels, which doesn't exist.In Fedora, is it necessary to compile a kernel? Looking through the FAQ at kernelnewbies, states to extract the kernel to a Linux directory, in usr/src, which also doesn't exist.
View 12 Replies
View Related
Feb 19, 2011
what is the correct way to delete the kernel that is compiled by me?
View 1 Replies
View Related
