Fedora :: Unable To Load The Menu Bar?
Jul 24, 2010
I am using fedora 13 .My kernel version is 2.6.33.6-147.fc13.i686.PAE . I installed vlc media player from the rpm fusion repository.I do have the problem with that.I am unable to load the menu bar in it . i find the following error.
[arun@localhost ~]$ vlc
VLC media player 1.0.6 Goldeneye
[0x8ccb8b0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
[0x8da5540] main generic error: no dialogs provider module matched "any"
[Code]....
View 2 Replies
ADVERTISEMENT
Aug 27, 2010
i have windows xp operating system yesterday i installed ubuntu9.10 dual boot when the grub gets loaded it gives me four options as follows
1) linux......
2) linux......recovery...
3) mem test...
4) windows...
when 1) linux is selected it loads ubuntu properly but. but when i select 4) windows a black page with GRUB written on the top left corner of the page is displayed and will not take any command... the only option i can do is hardboot.
View 21 Replies
View Related
Jul 25, 2011
I get the following error, after installing and configuring httpd - it will not start any longer:
Code:
Starting httpd (via systemctl): Job failed. See system logs and 'systemctl status' for details.Where can I find the system log for this so I can post what is actually causing this?
View 10 Replies
View Related
Mar 10, 2010
I bought HP p6270in desktop with windows7 preloaded now i need to install RHEL 5 on my PC. After i tried booting with RHEL 5 (Server Edition) OS Media
in boot screen i tried with graphical mode and text mode and resolution=1280x768 linux noprobe but after one screen loading scsi driver in blue screen the next screen is going with some unknown language in blue screen means not in human language and stops there itself and unable to continue my installation...
The HW specification of HP p6270in is as follows:
Part / FeatureSpecification / Support
Motherboard description�Motherboard manufacturer's name: Pegatron IPIEL-LA3
�HP/Compaq name: Eureka3-GL8
[Code]....
View 4 Replies
View Related
Nov 29, 2009
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
View 11 Replies
View Related
Nov 29, 2010
I have F14 x86_64 installation on my laptop. I once used latex vary well. After recent update of the system, there seems to be a latex font problem. When I ran xdvi, the dvi window flashed once and disappeared immediately.
The error in the terminal is:
Code:
$ xdvi ms
Warning: Missing charsets in String to FontSet conversion
Warning: Unable to load any usable fontset
Error: Aborting: no fontset found
I have xorg-x11-font-utils, xorg-x11-fonts-misc, xorg-x11-fonts-ISO8859-1-75dpi, and xorg-x11-fonts-ISO8859-1-100dpi installed. I then ran:
Code:
# yum install xorg-x11-fonts-ISO8859*
to install some extra fonts. But the problem remained. What shall I do?
View 1 Replies
View Related
Dec 30, 2009
I have a new VPS running.But PHP doesn't work well. The error message I get from /var/log/http/error.log is code...
View 5 Replies
View Related
Sep 20, 2010
I have been unable to get the snd-aloop module to load on boot.
I have tried appending the following to /etc/modprobe.d/dist-alsa.conf code...
View 2 Replies
View Related
Jan 26, 2010
When I try to shutdown or reboot from the system menu in Fedora 12, I am returned to the logon prompt. I am able to shutdown and reboot from a terminal window by issuing the shutdown command as the root user.
View 6 Replies
View Related
Jul 24, 2010
I have F13 installed. As was in F11 , i cannot edit my menu bars by right clicking the menu bar. Also in system>preferences> . there is no EDIT MENU option available to edit.
View 1 Replies
View Related
Nov 8, 2010
After upgrading to FC14, things went south for some of the websites etc I run. I have the following snmp related packages installed:
php-snmp-5.3.3-1.fc14.i686
net-snmp-devel-5.5-21.fc14.i686
net-snmp-libs-5.5-21.fc14.i686
net-snmp-utils-5.5-21.fc14.i686
net-snmp-5.5-21.fc14.i686
On a number of sites I use PHP's snmpget() function, but now on all these I just get this error: PHP Warning: PHP Startup: Unable to load dynamic library '/etc/php.d/snmp.so' - libnetsnmp.so.15: cannot open shared object file: No such file or directory in Unknown on line 0 PHP Fatal error: Call to undefined function snmpget()
[Code]....
View 8 Replies
View Related
Jan 19, 2010
fedora 12 with php 5.3.1 + apache is installed on the server
I needed a FFMPEG + MENCODER + FFMPEG-PHP setup , so I have installed all of the necessary libraries/codecs along with ffmpeg , mencoder and ffmpeg-php
I've added ffmpeg-php (ffmpeg.so) module to php.ini and restarted httpd
But ffmpeg was not showing up in phpinfo() so I grepped : php -i | grep ffmpeg
for some clues and got this warning
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/ffmpeg.so' - /usr/lib/php/modules/ffmpeg.so: undefined symbol: php_gd_gdImageSetPixel in Unknown on line 0
That error explains why ffmpeg is not loading
Obviously something to do with GD library , so I've researched on the net , and found that some users suggest loading the GD module before FFMPEG module.
I gave it a try and added this at the end of php.ini:
Code: [gd]
;loading gd
extension=gd.so
[ffmpeg]
;loading ffmpeg
extension=ffmpeg.so ...but still same error when greping phpinfo()
View 1 Replies
View Related
Dec 19, 2009
I don't know if its a 'bug' of something f* up on my system (Fedora 12).
When I right-click on the 'Applications' menu I don't see the 'edit' ...
View 5 Replies
View Related
Nov 16, 2010
I'm unable to open and view folders graphically. I click Places -> Home Folder (or any of the other folders, including Computer), and the cursor turns to the spinning "wait" dial, but the folder won't appear. A tab appears in the bottom panel, with the title "opening ZenBeam" (or "opening Desktop" or "Starting Computer", depending on which folder I tried to open) for a few seconds, but then goes away. Left- or Right-clicking on these tabs doesn't give me any options.
This used to work normally, but stopped suddenly a few days ago, following a reboot. I'm guessing it's become corrupted, but I don't know what "it" is. I can navigate in a command line window normally.I have rebooted, and I have run System -> Administration -> Software Update, but that didn't fix the problem.I was going to add the information in System -> About This Computer, but that seems to be having the same problem.What can I do to fix this? What application is failing to run?
View 7 Replies
View Related
Feb 27, 2010
i tried to install F12 x86_64 on my new hp dv7-3020 with nvidia GT 230M. I've update all the system but i cannot install video driver. I tried with the official driver released by nvidia (Linux x64 AMD64/EM64T Display Driver 190.53) but it gave me an error "unable to load nvidia.ko fedora 12".
View 14 Replies
View Related
Jun 26, 2010
I have installed Matlab into /opt/matlab and the file to run the program is located in /opt/matlab/bin and is called matlab. I created a file:
#! /bin/bash
/opt/matlab/bin/matlab
and placed it in /usr/bin.
From there, I can run matlab by typing 'matlab' in a Terminal window. My problem is that I created a link in my start menu with the command 'matlab' but all I get is the splash screen for 5-10 secs then the program crashes out. However, when I run it from a Terminal, it loads up just fine.
View 2 Replies
View Related
Oct 15, 2010
I've just installed Lubuntu 10.10 to an Asus A2400H laptop. It has a Celeron 2.6 Ghz CPU and 512mb RAM. In the past I have installed Ubuntu and more recently Xubuntu 9.10 and 10.04. This time round I wanted to try out Lubuntu to get more speed out of this laptop but it's giving me crazy problems.When I run the Live CD all seems to work well and quick and there are no problems I can see. Then having installed it -- no errors during install -- when it boots up the fan goes at 100%, the only items on the menu are log off and something else of no use, but neither work. I can't load any of the main programs, but I can get to terminal and the update manager works, although it works extremely slowly.
I typed the 'top' command from the terminal and it says CPU usage is only 35% and only half the memory is in use, and no swap file.I have tried a reinstall and it's exactly the same. I've done the 'check disk for errors' and given the CD lens a clean because sometimes this has caused problems in the past, but it doesn't seem to be the case here given there are no errors during install (I watched the whole install... all 50 minutes of it).I have previously istalled LXDE on this laptop side-by-side with Xubuntu and it did have some fan issues and bugs but still worked for the most part, so I would have thought just having the one system would create less conflict.
View 2 Replies
View Related
Nov 30, 2010
So out of the blue this morning when i started ubuntu and logged in the top bar and bottom navigation bars wouldn't load. I did recently uninstall some software,ut i had successfully restarted and logged in multiple times since. So im not really sure what is going on.
View 3 Replies
View Related
Nov 16, 2015
I am using sid and come across the error that a root terminal will not load from the applications menu after it's been opened and closed?
View 2 Replies
View Related
May 2, 2011
So, upgraded and then installed slim b/c I wanted to have a nice login screen but now when logging in all I get is the background, no menu no panels no nothing, had to manually create a shortcut to firefox to get help, anyone know how to manually start the menu and/or how to fix.
View 5 Replies
View Related
Feb 24, 2011
I recently bumped the power cable on my debian server at home. The computer shutdown, and since then hasn't been feeling like going past grub. When I boot the computer it gets to the "Welcome to Grub!" screen, but doesn't load my menu. I booted into a live cd and the hard drive seems intact and accessible. I re-installed grub without any problems, but the same problem is happening. I tried running fsck, but it says that the "device or resource is busy while trying to open /dev/sda". I am kind of stumped and would prefer not to reinstall debian to get this box running.
View 2 Replies
View Related
Jun 1, 2010
I installed ubuntu 10.04. After logging in,it's taking time to load the gnome menus.
View 1 Replies
View Related
Oct 16, 2010
I'm running Maverick, trying to change my input method from IBus to Anthy (Japanese) but whenever I click on System > Preferences > Keyboard Input Methods, it won't load the preferences window. It'll say "Starting..." on the taskbar but then disappear. The usual keyboard shortcut does nothing
View 4 Replies
View Related
Dec 3, 2010
I am using Ubuntu 10.10, manually installed, on a Dell Studio 15 laptop, dual booting with Windows 7.While a few kids were playing nearby where I was working, one of the pillows they were playing with hit my laptop's screen and moved the screen's hinge backwards, applying pressure past where the hinge ends. This didn't seem to cause any physical harm to the computer, but I moved away from where they were playing, and in the process, shut the laptop, putting it into sleep mode. I opened the laptop and entered my password to unlock it. About half a second after entering my password and displaying the desktop and open windows, it brought up the password prompt again, as if I'd just opened my laptop up and removed it from standby, although I had not in fact touched it since I had entered my password a mere half second before. I thought that that was strange, and then attempted to continue my work. However, although the mouse worked fine, when I attempted to apply a keyboard shortcut (Ctrl+Alt+2, which runs a 2-finger scroll script and has to be run every time I take the computer out of standby), Ubuntu didn't register it (I didn't touch the keyboard otherwise, although I should have checked whether it worked all =).
I tried it again, and it still did not apply the script. Then I thought, "Oh, the pillow must have knocked something out of whack. I'll restart." When I restarted, grub loaded as usual, but the timeout ("loading the primary in Xs." sort of thing) that it usually displays did not display this time. I didn't notice it at the time; I selected Ubuntu, and it appeared to be loading it, removing the grub menu, but then hung. I waited 5 minutes for the computer to display the login screen, but it did not, so I restarted again, thinking that it might just be something stupid. It didn't work again, hanging again. I tried this with both the most recent linux kernel and the second most recent kernel, neither of which worked. But what was interesting is that Windows 7, which is also on the grub menu, loaded and displayed perfectly, as did GRUB Invaders, a game that can be loaded directly from grub.After this little escapade, I thought something was just wrong in grub.cfg, and it somehow wasn't mapping the Ubuntu menu entries to the appropriate OS and kernel. So I loaded up a live CD, and attempted to look at the linux entries. These are the menu entries 10_linux, 00_header, and 20_linux_xen.
10_linux:
Code:
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
[code]....
View 9 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Aug 8, 2010
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
View 3 Replies
View Related
Feb 4, 2010
System>Prefrences right? It's not there? Everywhere I look It says it should be there,.. well it's not... How can I add it manually? or where is the folder? I would like to edit my themes.. I have a theme manager, but it doesn't load any themes I download..
View 4 Replies
View Related
May 4, 2010
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies
View Related
Mar 17, 2011
Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen....nothing works except Ctrl+Alt+Delete....system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 6 Replies
View Related
Mar 20, 2011
How do I add/delete modify the menu system on the Fedora Menu Bar, i.e. If I want to add a custom menu to the "Applications/Office" menu how do I do it?
Fedora Core 14 On Gnome 2.32.0
(Linux xxxxx 2.6.35.6-45.fc14.i686 #1 SMP Mon Oct 18 23:56:17 UTC 2010 i686 i686 i386 GNU/Linux)
View 4 Replies
View Related
