Fedora :: Unable To Install Gtk+2.0 On 9 - Setting The PKG_CONFIG_PATH Env?
Mar 2, 2010
I am trying to install wireshark latest version on Fedora core 9. It has a dependency on gtk2.0 > 2.4, I tried installing gtk+2.18, But this sucks.GTK inturn has dependencies on glib(2.21), atk , pango and cairo. I have old version of glib i.e 2.16.6 which comes of fc9 distro. I downloaded and installed glib 2.22 from the source( ./compile, make and make install).
The installation was succesful, the libraries get generated in /usr/local/lib. After installing glib, still I get this error while installing gtk+2.
Error:
/////////////////
" checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
[code]....
View 6 Replies
ADVERTISEMENT
Jan 27, 2011
Objective: Create a guide to building the now orphaned pam_usb source for Laughlin and summarize the make/install process so that everyone can easily do their own make.
Sources:
http://pamusb.org/
1) Downloaded latest version:
Soundforge pam_usb
2) Resolved Dependencies:
sudo yum install libxml2-devel pam hal pmount python pam-devel hal-devel dbus-devel
3) Tried first make: cd ~/Downloads/pam_usb-0.4.2
[Code]...
View 2 Replies
View Related
Jun 20, 2010
I am facing problems when trying to install gtk+, I have downloaded all the required libraries, but the following output?
checking for BASE_DEPENDENCIES... configure: error: Package requirements (glib-2.0 >= 2.21.3 atk >= 1.13.0 pango >= 1.20 cairo >= 1.6) were not met:
Requested 'glib-2.0 >= 2.21.3' but version of GLib is 2.12.3
No package 'atk' found
No package 'pango' found
No package 'cairo' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. you may set the environment variables BASE_DEPENDENCIES_CFLAGS and BASE_DEPENDENCIES_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
View 6 Replies
View Related
Sep 14, 2010
i ran into a problem while isntalling xine player on fedora 11, i first of all installed its core engine 'xine-lib' successfully with standard prefix! when i run the './configure' for its frontend (xine-ui) it gives this error.
No package 'libxine' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables XINE_CFLAGS and XINE_LIBS to avoid the need to call pkg-config.See the pkg-config man page for more details.
View 4 Replies
View Related
Jul 29, 2010
I'm trying to install the latest version of tracker - 0.8.15. When I run ./configure, I come up with an error like this:
Code:
checking for getline... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for GLIB2... configure: error: Package requirements (glib-2.0 >= 2.24.0) were not met:
No package 'glib-2.0' found
[Code]...
Surely the libglib2.0-0 package is some kind of replacement for glib-2.0? My understanding from the man page is that PKG_CONFIG_PATH is some way of linking to and checking requested packages... is this right? Can I change it to point at the libglib package instead?
View 1 Replies
View Related
Feb 13, 2010
I have xubuntu 9.10 and I'm trying to install iw-0.9.19.When I use the command "make" I get this error:
/bin/sh: pkg-config: not found
/bin/sh: pkg-config: not found
Makefile:38: *** Cannot find development files for any supported version of libnl. Stop. I read the Readme file and it says: "To build IW, just enter make. If that fails, set the PKG_CONFIG_PATH environment variable to allow the Makefile to find libnl". I guess the problem is linking Makefile (in iw-0.9.19 directory) to libnl (version 1.1 correctly installed on xubuntu) via pkg_config_file.
View 6 Replies
View Related
Feb 23, 2010
In my CentOS5.4 I need to install gtk+-2.12.2, it demands glib-2.22.3, and system has only glib-2.13.5I download and install glib-2.22.3 with command ./configure --prefix=/opt/glib-2.22.3 && make && make installDownloaded gtk+-2.12.2 and compiling like ./configure --prefix=/opt/gtk+-2.12.2 --with-glib=/opt/glib-2.22.3gives error:Requested 'glib-2.0 >= 2.13.5' but version of GLib is 2.12.3Consider adjusting the PKG_CONFIG_PATH environment variable if youinstalled software in a non-standard prefixI made $ export PKG_CONFIG_PATH=/opt/glib-2.22.3/bin:$PKG_CONFIG_PATHAnd please specify if here I have to write /opt/glib-2.22.3/bin or /opt/glib-2.22.3?and echo $PKG_CONFIG_PATH - I see my lib in $PKG_CONFIG_PATH
View 2 Replies
View Related
Feb 23, 2010
In my CentOS5.4 I need to install gtk+-2.12.2, it demands glib-2.22.3, and system has only glib-2.13.5
I download and install glib-2.22.3 with command ./configure --prefix=/opt/glib-2.22.3 && make && make install
Downloaded gtk+-2.12.2 and compiling like ./configure --prefix=/opt/gtk+-2.12.2 --with-glib=/opt/glib-2.22.3
gives error:
I made $ export PKG_CONFIG_PATH=/opt/glib-2.22.3/bin:$PKG_CONFIG_PATH
And please specify if here I have to write /opt/glib-2.22.3/bin or /opt/glib-2.22.3?
And echo $PKG_CONFIG_PATH - I see my lib in $PKG_CONFIG_PATH
But still the same error.
View 2 Replies
View Related
Aug 9, 2009
I never upgrade from one release to the other but rather do a completely new install. How can I keep my Gnome settings from the current release and somehow impose them after a new install. I am not sure which files/hidden files I should carry, save, possibly to a USB stick or whatever and a reasonable procedure to copy/impose them after the new install is stable.
View 5 Replies
View Related
Mar 29, 2010
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies
View Related
Sep 13, 2010
My laptop is currently running on Windows 7 Ultimate. I have a 320 GB HDD, which I have partitioned as follows. C: Drive as Windows 40 GB capacity and successively partitioned the rest of the drives for 50 GB capacity and left an unallocated space of 67 GB for fedora 13 x64 installation. The problem that I am facing is, that I am unable to install fedora on this unallocated space..even though I am checking the option for "Creating custom Layout". When I check the option for "Creating Custom Layout" Ive been shown with the only option to install fedora on the unused space on the HDD which is around 265 GB. I am also attaching a screen shot of my disk management. how I can install Fedora on this unallocated space of 67 GB?
View 12 Replies
View Related
Apr 25, 2010
I'm using Karmic with Grub 2 (1.97b4) I have this strange problem going on and believe it might be a bug so if no resolution will file it on Launchpad. Whats happening is this:when I installed Karmic fresh a couple of months ago I never did anything with customising the Grub splash screen. I just stuck with the boring black/white and if I wanted to got to Memtest or my little used Win XP partition would just hit the down arrow when the Grub Splash appeared and go there.A couple of days ago I decided to add some custom colors to the splash screen as outlined in the Grub 2 documentation. I did this to both my desktop (Acer Aspire L100) and my laptop (Compaq) Everything looks fine except for one thing. On the desktop if I hit the down arrow (or any other key) it immediately boots the first option which of course is Karmic. It should have paused the timer and allowed me to scroll down. What this means is I can only boot Karmic at this time. This is only happening on the desktop!
View 1 Replies
View Related
Mar 8, 2011
My system boots in 1024x768 screen resolution. I'd like to change it to 1280x1024 for all users. I can change the setting to 1280x1024 and it's persistent between sessions, but is reset back to 1024x768 on reboot. In the old days, I used to edit xorg.conf to set the the mode I want, but now there's no xorg.conf. I created one using
xorg -configure
but this created an xorg.conf which has no modeline settings at all. The file just looks like a template. Here's what I got:
Quote:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
[Code].....
View 1 Replies
View Related
Aug 22, 2009
Everytime i try to install any app on fedora 7 i.e. RPM i get error message that says cannot get to interent, while i have access to internet on fedora ..
View 5 Replies
View Related
Aug 24, 2010
I've recently updated my box from Fedora 12 to Fedora 13....today I wanted to install VLC and followed the procedures provided on VideoLAN's website on how to install VLC (See Below):
Use RPM Fusion for F11, F12 and F13 (available for x86, x86_64, ppc and ppc64)
Install rpmfusion-free-release-stable.noarch.rpm for F11, F12 and F13.
$> su -
#> rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm
#> yum install vlc
#> yum install mozilla-vlc (optionnal)
[Code]....
View 4 Replies
View Related
Jan 20, 2010
I am trying to install EBS R12 on linux OS. but it gives an error er 50011 due to domain. I am using stand alone system. how can i fix domain name. I have already identified hostname
View 1 Replies
View Related
Jul 31, 2010
I want to install Fedora to, I can't click Next. The cd's been checked and there's no problems.
View 10 Replies
View Related
Jan 16, 2009
install vxl-1.11 using cmake and am getting various problems like Avi File NOT found and many more files Dart,ECW,DC1394,MPEG include dir,Xerces bxml are not found. install vxl...and i would like to know what are they dependency packages required to be installed for vxl....
View 14 Replies
View Related
Jan 17, 2009
Hi, I attempt to install f10 via dvd. I am asked about my language and keyboard. When I move on from here I get a message. the fedora disk was not found in any of your cdrom drivesI toddle off to my laptop and the install works fine My computer has 2 drives - CD & DVD. Does this message indicate that the computer is only looking at the CD drive. I guess I need to add some options to the install command.
View 1 Replies
View Related
Apr 13, 2009
i have recently got a system assembled with the following configuration
intel g31 mainboard
intel core2duo 2.8 proc.
4 gb ram
1 gb ati radeon hd4650 pci xpress card
160 gb harddrive with win-xp pro
i have been trying to install fedora 10 since last week but i am not able to run it in gui mode the anaconda installer tells me failed to load in gui mode and running in text mode only. i am new to fedora and am next to unknown. what should be done to get the fedora running on me computer
View 4 Replies
View Related
Jun 16, 2009
During installation of fedora 10 i depare with a issue that requires internet connection to proceed the installation. since i don't have a internet connection in eth0 just have one in wlan0 that is not detected by the configuration i didi not could install the fedora 10.
What was my mistake, i download the Fedora-10-i386-netinst.iso to boot. Should i download another image to boot.
View 5 Replies
View Related
Jul 4, 2009
Last week I put together a new build:Asus p6t deluxe v2, i7 920, etc etc And installed Win7 RC which worked perfectly, however for the past couple days I've been trying to install Fedora but it seems to never work. The F11 Full disk cannot load anaconda during install, but still manages to install, however the installation cannot boot. The live disk loads, but then a black screen with eth0 and eth1 link is down pops up. So I tried other dists, Ubuntu 8.04 cannot boot, 9.04 boots and installs, but after reboot doesnt work. Anyone got any ideas as to why I cannot install Linux. Also in Win7, I cannot install Fedora as a VM. It just goes to 100% load while booting and such.
View 7 Replies
View Related
Aug 31, 2009
I m facing a very strange problem while installing F10 from my NFS server , on the other hand i can sucessfully mount the directory from nfs server to client , but fail to install F10 from the same server,i created the F10 ISO image in the /mnt directory and share it via nfs server.
here this is my Exports Directory
/mnt/ 192.168.10.0/24(rw,sync,no_wdelay)
View 1 Replies
View Related
Dec 9, 2009
I'm trying to install Gnormalize for Fc12 through rpm, and I keep getting this message:
"Local Install Failed" Can't install /home/jeb/Downloads/Programs/gnormalize-0.63-7.fc12.i686.rpm as no transaction.
View 2 Replies
View Related
Aug 8, 2010
Everytime I boot after a while package manager icon pops an warning in the gnome panel "software source download failed. Could not contact media source 'Install Media', so it will be disabled". I'm unable to install any RPM package on my system. Tried "rpm -rebuild" but it did not work.
View 2 Replies
View Related
Nov 24, 2010
I am not able to install anything but stuff from fedora repositories. Let me show you:
Code:
[Vitaliy@localhost ~]$ su -c 'yum install gnome-commander'
Password:
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
[Code].....
View 1 Replies
View Related
Feb 23, 2011
I'm using F14 and when I try to update I get this report-
' no such table: packages'
and when I try using add/remove software I get this
'failed to use search generator: no such table: packages'
what these mean. I don't want to take guesses and do something wrong.
Added- searches produce this thread as number one topic others give me very little if anything to go on.
View 7 Replies
View Related
Aug 24, 2009
When I attempt to start the install of a .bin file, the prompt is returned almost immediately, no error messages. I have installed other .bin files with no problems. From the file directory I am typing ./file_name.bin. The file has -x from all levels.
View 4 Replies
View Related
Sep 1, 2010
i m new to fedora.i installed fedora 13.when i tried to intall broadcom-wl .the message shown is indicated below. install ma wireless internet
-another application is currently holding the yum lock;wait for it to exit the othe application is : packagekit
View 3 Replies
View Related
Nov 18, 2009
when ever i try to install rpm files in fedora 11 graphically i get this error,i get this same error for every rpm file i try to install. its driving me mad, iam unable to install rpm, please guide me how install rpm files in fedra 11 , iam new to linux OS. i installed fedora 11 from i368 dvdok this is the error, i got this error by clicking on more details.
raceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 1649, in install_files
txmbr = self.yumbase.installLocal(inst_file)
[code]...
View 4 Replies
View Related
