i have a linux machine. After installation it in not reading pen drive and cd drive. After some googling for pen drive i tried this as follows:[root@arnab]# dmesg | tail -100The output is as follows,
usb-storage: waiting for device to settle before scanning
Vendor: JetFlash Model: Transcend 2GB Rev: 8.07
Type: Direct-Access ANSI SCSI revision: 02
[code]...
few days back i forcibly remove my flash drive from the USB, but after that the pen drive seems to stop working whenever i try to insert the pen drive in Windows or Linux, i see the appropriate image but if i double click on the image it says nothing is mounted,
i have seen what is mounted with
#fdisk -l
&
#df
no pen drive is showing
i have tried to mount it forcibly with
#mount -t ntfs-3g /dev/sdb1 /media/external -o force
with variou combination of /dev/**** can anyone mount this pen drive or can tell me what's the default for /dev/ ??? i think sdb1 it works with my external drive but i am not sure for flash drive and i am also not sure if it's ntfs file system, it's 4 GB so it should be ntfs
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View Relatedi want copy files in ftfs drive to ext3 drive. how am I do this?
View 2 Replies View RelatedI have a 120 gig drive that I'd like to clone before it fails completely. I was thinking I'd pull the drive from the server and build a separate machine that has it's own os installed and the source and destination drive. Does anyone know of any linux tools will will do a full drive copy? Additionally, If possible, I'd like to move to a larger drive. how I'd migrate the 120 drive to a 400 or so? 1 idea I have is to install os on 2 new drives to where it they will boot, Then boot with one and copy source to the newly created destination drive.
View 6 Replies View Relatedi have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedI had F10 installed, then was tempted to download F11 (Leonidas). I was not happy with the OS, so I reinstalled F10.Now I cannot get my CD-RW Drive or DVD Rom Drive to operate fully. I can open documents saved in a CD but I cannot get any sound from music discs.They were working in the first F10. The icons are showing in "Computer" and appear ok in the Bios. I have tried disconnecting them both, rebooting, then reconnecting, without success. The details are:- Lite-on-CD-RW Drive & DVD Rom Drive unit- Pioneer.
View 9 Replies View RelatedNothing happens when ordinary users plug in a USB thumb drive or insert a CD into CDROM drive. Works fine for root. After root mounts the drives then all users can use them. How can I enable mounting/unmounting by all users?
View 3 Replies View RelatedI am running a 32-bit Fedora 11 OS (in GNOME).
My 2GB Kingston Flash Drive is plugged into my hp pavilion dv6000; the light on the flash drive is on but there is no icon on my desktop, and it is also missing from the 'Places' tab.
After typing fdisk -l I receive the following message:
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x000d7c32
[Code]...
I've plugged in the drive to different USB slots to no avail. I also plugged in my e-reader to see if my USB slots were malfunctioning, but the e-reader was detected by Fedora.
I have plugged the thumb drive into my Windows 7 Desktop PC with the hope of the OS recognizing the drive, but the result is the same as in my laptop.
My DVD-ROM drive seems to have issues under Fedora 15.This is the "normal" spin with GNOME3, all updates have been installed.First off, the drive seems to get "stuck" will not eject any media once inserted.Occaisionally, if I just keep pressing the eject button, the media tray will jump out, but then will immediately pull itself back in without any interaction from me.Second issue: video DVDs do not mount. It does not seem to matter if libdvdcss is installed or not. When a DVD video disc is inserted, the DVD drive completely disappears from Nautilus' Computer window. Once I eject the DVD (after pressing eject 50 times) the drive comes back to the Computer window.The drive is a Plextor DVD-RW PX-755SA connected via SATAI have tried using either regular IDE or AHCI configuration in the BIOS for it, no change either way.The drive works fine under Ubuntu and OpenSUSE, but I like F15 better and would like to get this fixed.
View 2 Replies View Relatedwould it be possible to clone an IDE hard disk (on which I installed Fedora 10) on a SATA hard disk, and that programs can succeed
View 10 Replies View RelatedI need to re-format an external drive. All the instructions I have found start with figuring out where the drive is mounted (sda, hda, etc.). However, as soon as my RH Linux machine sees the drive's format (ntfs) it decides it won't even mount it in the first place. Gives me an error message. Also, the drive doesn't show up at all via "df -k". how to convince RHL to be a little more accepting?
View 5 Replies View RelatedTrying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
View 1 Replies View RelatedI upgraded to Lynx.When I plug in a USB drive, the drive icon no longer appears on my desktop.If I go to Places/Computer it shows up.And once I open it, the icon appears on the desktop.
View 1 Replies View RelatedI am getting a new 4kb sector HDD for my laptop, WD scorpio black 750gb, I would like to image existing partitions on 512bytes sector HDD and move them to the new 4kb sector HDD, what's the best way to do this.
present config is as follows:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I am planning to keep the same three partitions as the primary partitions on the new drive and add few more logical partitions. I would have liked to move to GPT but since I need Win 7, I am stuck with MBR partiotion table.
Now, I understand how to partition an Advanced format disk, what I want to know is how to move the existing partitions on the 80 Gb disk to the new disk?
I use Clonezilla to copy partitions but it is not compatible unless both the target and the source disks are already using 4096 sector size.
I can use Acronis True Image WD Edition to clone Win 7 but how do I clone Ubuntu?
Also my Laptop's chipset is limited to SATA 1.5, will it cause any issues, I know the bandwidth is not an issue.
my linux server is running with an old IDE hard drive getting these hdparm results:
[code]...
i have a WD Raptor drive i'm going to install and put a fresh install of linux on it. i'm just curious, will using a much faster HD as my main drive increase the speeds of my network transfers from the raid drive? do transfers only go as fast as the system drive?
The software: Ubuntu Server Edition 9.10.The wetware: A programmer doing his best (read: ignorant, shitty) as an ad-h.When I plug the USB thumb drive in, the install OS gives it a drive letter -- /dev/sdb -- and it pushes the original /dev/sdb down to /dev/sdc. The installation works without a hitch, and GRUB2 installs, dutifully pointing the root at /dev/sdc1 instead of /dev/sdb1.I let GRUB2 start normally ("drive not found"), holding the <shift> key to get to the "rescue>" prompt.From there, I issue "ls" to discover that GRUB can NOT see /dev/sdb, and I can tell that because what is showing up as (hd1) does NOT have three partitions as it should.GRUB2 sees a total of 16 drives, not 26, and one of the drives it sees is "fd0" (there is no floppy drive).Issuing commands like "set prefix=(hdx,y)" and "root=(hdx,y)" have no effect as, I think it's just pointing to the (reiserfs)content drives and this GRUB2 tells me "unknown filesystem".I did try them all in vain, hoping that maybe I'd find a kernel somewhere.I used the "rescue" mode of the Ubuntu installer (the USB thumb drive) to get to a root prompt.From there, I mounted /dev/sdc2 (the "shifted" /dev/sdb2) onto /mnt, I mounted /dev/sdc1 (the "shifted" /dev/sdb1) onto /mnt/boot,and then I chroot'ed to /mnt.I edited /boot/grub/grub.cfg, editing every instance of "root=(hd2,1)" to the appropriate UUID for the "real" /dev/sdb1. Then I issued update-grub2.It refused to work giving me an banal "no such partition" error or something like that.
We originally had this server functioning by putting / and /boot on the SS SanDisk, which caused no problems during installation because /dev/sda doesn't get shifted.We then figured it was a good idea to put our OS files on something with failover capability. And that started us down this crappy "shifting drive letter" path.Can I control which drive letter the USB thumb drive gets assigned during the install process?If I could make it be /dev/sdc then I wouldn't be facing this problem.An alternate solution would be to know the cryptic GRUB2 commands that I can issue from the command prompt post-install, pre-reboot.But I'm wondering if that will ultimately work at all considering that GRUB2 couldn't see /dev/sdb at all.
So I install Ubuntu 10.10 on a multi-drive, dual boot with windows 7 computer. At almost the end of the install, I see "running grub-install sda" or whatever it is. sda is my windows drive.So rather than asking where to install the bootloader or give you the option like it used to, it just did it to my "first" drive.
What the hell? Now my Windows MBR is gone. I like to maintain that so if my linux drive dies I can still boot into windows via the old windows boot loader.Possible to move Grub2 to my other drive and repair windows 7 drive MBR?
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies View RelatedI have a second hard drive in my desktop and both the main dirve and second drive are 250GB. I use the second drive for backups, both manual and using back in time. The other day I noticed that the second drive was formated in FAT32. If I go to disk utility and look at the drive it says:Usage:FilesystemPartition Type:Linux (0x83)Type:FAT(32-bit version)Is this ok? I thought in Linux it should be Ext4. So far its been working fine for a while now but if I need to move my files and re format it to ext4 and move them back I would rather do it now when there is less data on the drive.
View 3 Replies View RelatedI have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
I have a USB drive on which I want to install Arch Linux (using the installer, not unetbootin or something similar, as I want the drive to be persistent.) The computer from which I want to boot this USB supports booting from a USB floppy, not a normal drive. Is there any way for me to make a USB floppy on another drive and use that to boot the normal USB drive?
View 2 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedI recently scapped XP Pro on an old laptop (Toshiba Portege 7220)as it was so slow and I installed Ubuntu 9.10 - All installed ok and it worked fine for about a month. Last week I switched on, got the Ubuntu splash screen and thats where it stayed. I gave lappy to a friend of mine that knows about Pc's (hahaha). When I got it back he said he'd wiped the HDD and partially installed xp. The install apparantly hung after the reformat and copying files onto it.My problem now is I can't boot from HDD, Ubuntu Live CD or Windows CD - Laptop is set to boot from cd then hdd.When I try to boot from CD, the cd is read as I hear the drive being used also see light for cd flashing, after a while i get a blank screen with flashing cursor in top left corner and the cd stops.If I remove the HDD and put it in external usb caddy I can see the windows folders/files when plugged into my desk top.My questions are :-
1. Is there any way to make the drive reusable as a internal drive again as I know it works as an external drive.I would like to reinstall Ubuntu on it
2. Is it a fault with the laptop itself - how do I check
I was trying to figure out how to get my network drive to mount as a local drive on my computer. This was back on 9.10. Since I've upgraded to 10.04, my boot process halts and tells me (paraphrasing) /shared is not ready to mount. To continue, pres S to skip or M to manually mount the drive.
Well, I have it mounting now through GVFS and I don't need this in my startup anymore. Frankly, it's just annoying that it won't boot into Ubuntu right away. So, what's the startup file I need to edit to remove the attempt to mount the network drive?
I have only been using Ubuntu since shortly after Lucid was released. I am a new convert and use it to run a back-up device / media server I have a total of 5 hard drives in the device. I have the Lucid system files written to /dev/sde. I am running a Raid 1 array with mdadm on /dev/sdc and /dev/sdd. I have been prepping to run a second raid 1 array with /dev/sdb and /dev/sda with the ext4 file system. I formatted /dev/sda to have a full partition of /dev/ sda1. I then went to do the same to /dev/sdb and the drive was missing from both gparted and the native disk utility. My array with sdc and sdd is still running with both drives working fine.I swapped the sata cable from sda and sdb with no change. The system will not recognize sdb no matter what I do but it does skip /dev/sdb in boot up which tells me it does see it.I have provide the output of the commands df, fdisk -l, and cat /proc/mdstat.
View 2 Replies View RelatedI just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
View 2 Replies View RelatedBack in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies View Related