Here's how i did it after reading a lot of threads from fedorasolved.org and this forum. At the command terminal:
chmod 777 Joomla-1.5.9-Stable-Full_Package.tar.gz
su
mkdir /var/www/html/joomla
cd /var/www/html/joomla
tar -zxvf /joomla/tar/file/location/Joomla-1.5.9-Stable-Full_Package.tar.gz
gedit configuration.php (this is just a blank file. Save it and close gedit)
[Code]...
I have recently merged two Joomla 1.0 sites I ran into one. I imported the articles I wanted to keep to the new site, and I have the old site's domain pointing as an alias at the new site. The new site is www.theouthousers.com . The old site was www.bludblood.com .
I also have the core SEF URLs on, using the htaccess.txt file that came with Joomla.
I have one writer for the old site who linked to his articles in various places, so I am trying to set up redirects for him so that he doesn't have to change all of his links.
For instance, I need something like:
http://www.bludblood.com/joomla/inde...d=25&Itemid=51
To redirect to the equivalent location on the new site:
[url]
And I also need specific links like:
[url]
To redirect to their new counterparts:
[url]
Keeping in mind that www.bludblood.com is now an alias of www.theouthousers.com, is there any way to do this? I have been trying with rewrite rules and redirects, and cannot seem to achieve the desired effect.
Tried various versions of:
Code:
Redirect [url] [url]
With the http, without, as regexps, as 301s, as permanents, etc, and it just will not work. Also tried as RewriteRule.
I just got an update that installed, and after a reboot I've got one core at 100%. The "you need to restart" icon in the notification tray said "glibc glibc glibc glibc nscd". Now that I look at it, It's switching between both cored. This behavior is consistent over multiple full reboots as well as kexec reboots.
Edit: Strange, just when I finished, the CPU load settled out and now everything is fine. I wonder what was going on. I'm rebooting right now to double check. Edit2: Yep, same issue 100% usage on one core. And it probably will level out soon. I'm not sure what could be causing this. I assume that glibc could be the issue.
I have a laptop, installed with window XP. I just installed Fedora Core, re-formatted all parition on the system, and installed default packages. The installation was successful. But after I took out the installation CD and reboot the system, chose Fedora core (the only banner), the screen just become green, and nothing else from there.
The only thing I am not 100% sure is, during the installation, my monitor was probed as unrecognized. I have tried both 'go with default' and specify one "LCD 1024x...", but either way, after the installation, system won't reboot.
i download the rpm package of gcc .
View 10 Replies View RelatedI have just installed joomla and proceeded to do the web install. Got the interface up and running and its now complaining it does not see the mysql server running. I do in fact have it running. Veryfied it with mysql command on command line and it complained with missing attributes.
I read a thread that it needs php-mysql installed. So went to proceed to install it. Well, I did not have that and went to install it. Verified it. Package mysql-server-5.0.77-3.el5.i386 already installed and latest version
I then did a service mysql reset.
Checked back at the joomla web install interface and still, it says there is no mysql support! What is next? Im running centos OS. Also, I am running LAMP
I am in school for my CIS degree and the book I am using this session covers Windows XP and Fedora Core 4. I am having trouble finding & downloading Fedora Core 4. My question is: Is there a big enough difference between Fedora Core 4 and Fedora Core 14 that I would not be able to use 14 instead of 4?
View 14 Replies View RelatedI just loaded F14 on an old Dell Dimension 3000 with a dual core processor but only one is showing. Here's the output from top:
processor: 0
vendor_id: GenuineIntel
cpu family: 15
model: 4
[Code]....
i have installed bless hex editor on my fedora 14 laptop.However when i open it ,it shows "mono-core wants to install a font language code not matched: utf-8" i am not able to use bless hex editor properly.
View 4 Replies View RelatedI've created a mysql user and he can connect Joomla to mysqld when everyone has full permissions to the mysql homedir but I know this is bad from a security standpoint. If I set mysql user as the only one with permissions then I can't connect. I know Joomla support is not very help from past experience, wish I could dump it for something else but it does work great once it is configured so I need to keep it around, can anyone make a guess as to what permissions I need to have set on mysql's home dir so that joomla can still connect yet I am more secure than now?
View 11 Replies View RelatedI have created a virtual machine of a system running Fedora Core 4 and I need to upgrade it to Fedora Core 10. Based on what I have read, it iis possible so I started theupgrade process. I get an error message saying that /dev/hda6 (my root paritition does not exist) even though it does.
Does the installer need to read a label from /etc/fstab? I executed tune2fs -L / /dev/hda6 amd ,and added LABEL=/ for the corresponding entry for fstab. but the FEDORA CORE 10 is still giving the same problems for the installation process. Should I upgrade to an intermediate verson like Fedora Core 7 first?
I did a horrible mistake due to lapse in my concentration. Here is the 80 GB IDE disk geometry:
=> C: Windows XP SP2 15 GB partition
=> D: NTFS parition - 10 GB
=> E:F:G:H: NTFS partitions on the Windows Extended partition.
=> On the same Extended partition, there exists Linux /swap and /root partitions.
What happened was:
a) I wanted to delete the H: parition which was residing adjacent to Linux partition
b) By mistake I opened the Explorer and clicked the Mouse on H: partition and left it like that (forgot)
c) I opened Add/Remove program list but did nothing, to do few uninstalls after partition deletion.
d) Now I opened compmgmt.msc for Disk Management then deleted the H: partition!
Then XP reacted strangely and got almost hung
e) Then I switched OFF and ON the PC.
f) Most shocking was GRUB screen vanished (crash console appears) which means that Linux partition got deleted instead of H: partition!!
It's important to share with you that Fedora Core 12 possess the default BOOT flag. I thought that it's nothing big deal, only a case of Boot flag toggle with DOS bootable CD but am shell shocked to find after hitting the fdisk from DOS it says Error reading the disk!!! I felt like collapsed for a while, don't know how I did such a mistake. how to boot into my Windows XP. I can't afford to loose data or bear the expense on Data recovery
I am attempting to use a PXE and nfsroot to boot fedora core 13. When my virtualbox image boots, I get the following error. view the screen shot.I have the following entry in my TFTP entry to boot this system:
Code:
prompt 1
default linux
timeout 30
label linux
kernel vmlinuz_fc13
[Code]..
Okay I posted about this a while ago, and i got my wired network to work, but now i need my wireless card driver to work. I have been doing research and I found something called ndiswrapper which drivers from windows working in linux. I typed in lspci in the terminal and it gave me my specs of my wireless card which is a:
-Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
-Some people said there is no original driver for this card, so you need to use ndiswrapper, I was wondering does anybody know what this is, how do i use this, and help me out to get my wireless card going. If you give me instructions, please be really specific as I am really new and still getting the hang of commands.
Anyone know how to compile fedora core to be used as a thin client / dumb terminal with a small kernel?
View 4 Replies View RelatedFirst time on the forum, excuse me if i'm posting this in the wrong area. So with that being said, here's what goes on - right before it gets into the loader, it hangs right before it gets to it, where it says it's going to load it.
View 3 Replies View RelatedI have been spending many days trying to figure out if is possible to implement para-virtualization with Xen on my Fedora Cora 14 with the following kernel and architecture 2.6.35.6-48.fc14.x86_64.I have read many documents that made me crazy at all, and finally they don't have many sense for me, probably because my english is very poor and many times I am not able to understand the meaning of those.It's so frustrating for me.Summarizing, what I want to do or to know is if is possible to run Xen dom0 kernel on my machine and then running some guest or domU over it.I've already known that there are not xen-dom0 kernel packages like in older Fedora versions (for instance Fedora 9) what makes things easier. I want to know if I would have to built my own kernel from kernel source repositories and how?, because tried it before and It didn't work probably cause there was something wrong in my building.I'm very willing to provide you as many information as you want or need to solve this unbeatable situation.
View 1 Replies View RelatedIs there a fix for Firefox crashing with core 11?
View 14 Replies View RelatedI am running Debian Squeeze 32bit with gnome-core installed. When I alter the acceleration or sensitivity within the pointer speed section of gnome-mouse-properties, my mouse does not act differently. Has anyone else encountered this problem? How can I change my mouse sensitivity? I have installed Debian Lenny previously and I recall that I was capable of changing the sensitivity.
View 1 Replies View Relatedi using sonyvaio VGN-SZ440 core 2 due , installed FC13 x64,but when i check system monitor so i see one core runing i can't understand ,
View 7 Replies View RelatedI have IDLE installed with the Python-tools package, but when I run IDLE in command line, it runs python 2.6...I have python 3 installed, I'm just wondering how to tell IDLE to run Python 3. The reason I ask is because, if I go through IDLE, file>Path Browser, I see a lot of Python 2.6 files...but no Python 3 files. When i run yum install Python3 -
[root@Homecomp Legio]# yum install python3
Loaded plugins: presto, refresh-packagekit
Setting up Install Process
Package python3-3.1.2-7.fc13.x86_64 already installed and latest version
Nothing to do
When I look for Python 3, I find it in /usr/bin/Python3, an executable file, along with 3.1, 2.6 and a link to executable 2. I have no files in /usr/local/bin. My question is...How do I tell IDLE to run Python 3 instead of 2? I just started using Fedora, so I don't have all the commands down yet. Have to say its a bit different than Windows...but in a good way so far.
I set up my home server like 3 year ago on a Fedora core 4, I am running a NAT, firewall and FTP very smoothly on it. In the past 3 years, it has been doing perfectly without any modification/ upgrade. But recently, I just realized I might need a VPN server on it, but the recent release of OpenVPN doesn't support Fedora core 4 anymore, therefore I suddenly want to make an upgrade. I've read the articles/ manual for Fedora 13, yet I do not find any suggestion on how to upgrade to 13 from core 4.
how can I do an upgrade in the easiest manner as I don't want the server cease working too long (I need its NAT for my network).
I have a Dell studio 15 laptop with 4GB RAM,320GB HDD,ATI Radeon HD 7450 graphics card(512MB) ,Inetl core i3 processor.I am multibooting Fedora 13 with Windows 7.My problem is that Fedora 13 freezes randomly few minutes after booting.Initially,crashing occurred when i was browsing with Firefox,so i downloaded and installed Opera,again the system was freezing.Then i even removed the ethernet cord to check whether there is some problem with ethernet driver.I am trying to use Fedora 13 for running ns2.But,this freezing problem is a big setback.
View 4 Replies View RelatedI plan to install PHPUnit in Fedora Core 12 pc. But I cannot, I already use all YUM commands Regarding this.
View 2 Replies View RelatedI've install FC14 on my iMac 27" i7 and I'm having exactly the same issue I had with Ubuntu 10.10: acpid eats 90% of one Core all the time.With Ubuntu this issue was solved by updating but with FC14 no way, I can't find any solution.Right now I've turned off acpi and apm at boot time but this only let me use one of my four Cores.
View 1 Replies View RelatedPreamble: Just installed fedora 7 on old sony viaio and this is the first linux distro I have ever found useful, as no time for steep learning curve though patient enough.What PCI wireless card should or could I buy that might be detected, if any? Or will I have to do much hacking and tinkering? If so, so be it!
View 3 Replies View RelatedTo see if an application is using all the cores in a system, I wanted to identify which process is running on a core at a given time. Is there any way to get that information?
View 3 Replies View RelatedI got a copy of Fedora 8, What are the apps included? Any like K3b?
View 6 Replies View RelatedI want to remove fedora core 6 & that is all
View 14 Replies View RelatedWhere can I get the wireless driver for Fedora core 10. I am using a 64 bit system with a hp pavilion notebook.
View 7 Replies View Related