After re-make kernel 2.6.36,there are two failures in the boot massage:
1:/lib/modules/2.6.36/build/[FAILED]
2hecking for module nvidia.ko: [FAILED]
two warning
1:nvidia.ko for kernel 2.6.36 was not found.[WARNING]
2:The nvidia driver will not be enabled until one is found.[WARNING]
Forgive me if I have posted this in the wrong forum, first time poster with Fedora. I have been using Linux for some time now, mostly Mint, but Fedora 12 @ work. Anyway, I receive the following error in my /var/log/boot.log:
Code:
nvidia.ko for kernel 2.6.32.9-70.fc12.i686 was not found
and the driver does not load (My xorg.conf file is not loaded), but once I am at a
[code]...
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I was upgrading my machine from 10.04 to 10.10 through the update manager yesterday. Half way in, my power was cut off due to a storm. Now I can't boot up and says a message like "NVIDIA kernel cannot be found" blah. I know my drivers are down and what not. When I boot into the recovery mode I get the error "fsck from util-linux-ng 2.17.2 /dev/sda2/: clean, 441017/886437 files, 5443336/3536363227 blocks" I guess I just need to download the rest of the software, but how? I don't have a CD burner on hand, only a 8gb USB, but I don't know enough command line to run the USB using the GRUB command line. I just want my files from my /home directory.
View 1 Replies View RelatedI have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/2.6.37.6-smp/source and .../build links to /usr/src/linux-2.6.37.6-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
View 6 Replies View RelatedI updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
Trying to install virtualbox in F12 but fails when recompiling kernel module. Output of vbox-install log is:
Attempting to install using DKMS
removing old DKMS module vboxdrv version 3.1.6
Deleting module version: 3.1.6
completely from the DKMS tree.
Creating symlink /var/lib/dkms/vboxdrv/3.1.6/source ->
/usr/src/vboxdrv-3.1.6
DKMS: add Completed.
Error! Your kernel source for kernel 2.6.32.11-99.fc12.i686.PAE cannot be found
at
/lib/modules/2.6.32.11-99.fc12.i686.PAE/build or /lib/modules/2.6.32.11-99.fc12.
code....
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies View RelatedI just installed the latest kernel today and reinstalled the nvidia driver using " nvidia driver in F12 using the run method." [url]
I boot in X properly and then the automatic bug reporting tool icon showing witht he following error:
I'm using nvidia FX 5500. I install my driver as leigh123linux driver installition guide
Code:
Checking for module nvidia.ko: [FAILED]
nvidia.ko for kernel 2.6.33.6-147.2.4.fc13.i686 was not found.[WARNING]
[code]...
I read somewhere that when updating Fedora I might want ttemporarily disable userdefined repos like RPMfusion.I tried that with
Code:
yum upgrade --disablerepo=rpmfusion-free-updates
It updated, I rebooted, and now my nvidia driver is not found.
[code]...
i am having a problem with my just recently upgraded ubuntu 10.10 ive search google and forums for well over 4 hours with no luck so im asking here. Now i know nvidia 96 has problems with xorg 1.9 but i installed the updated nvidia 96 driver that supports xorg 1.9 through maverick-proposed and i dont have nvidia control panel under system->preferences and if i types sudo nvidia-settings in terminal i get it says im not running an nvidia driver but the hardware driver reports it as activated but not in use and nvidia settings also tells me to run nvidia-xconfig but it says this when i do sudo: nvidia-xconfig: command not found
View 6 Replies View Relatedjust ran update lastnight and i got this error message on login, which results in a blank white screen
[Code]...
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies View RelatedI downloaded 64-bit version of Fedora 11 and burned the iso on my dvd. When I rebooted the machine it booted up from the dvd but it showed an error message that kernel "image not found". And it stops there itself. Can someone show me some way except downloading the iso again?
View 1 Replies View RelatedA few days ago I installed F12 and it was working fine very well up until today when I booted my computer from a perfect working order state yesterday to this. Well my wireless was still being sniffed and slowed down to dial up speed but what's new thats been consistant for at least 3 months I can't really do much about it since my brother doesn't like changing the password.
I recently logged onto my new fedora 12, 64-bit, system encrypted (all partitions effected by install), selinux enforced install to find myself in tty4 and some "other" users logged on to the other terminals. My folders would have lock icons on them after opening, my notication menu/toolbar crashed and hasn't returned on system reboot, some data transfers between removable storage returned input output errors while others worked fine(?). I also recieved this kernel bug output from the bug reporting tool but I have no idea what it means.
Also I was not loose with the security either I had removed unconfined login types (After setting up the system as I needed) meaning I couldn't even run root or sudo and neither could anyone else (asfar as I was aware). I pretty much increased selinux to its maximum boolean strictness and limited the _default_(Me included) account to a user from a _default_ unconfined (to actually be able to log in with the selinux boolean in place). Meaning they "the exploiters" were able to bypass selinux as a user account? How is that possible and even if you do root logon is disabled by selinux too?
At the moment I'm on a live cd trying to look for a way to custimise them as it seems it may be my only option.
Just a side note you can't just log in to tty4 by default without actively taking up spaces either by other users or your own use. Meaning since the tty login is automated 3 terminals were in use tty1, tty2 and tty3.
Which commands should I run to find out what is being done?
Edit: Just had my F12 x64 live cd taken down twice and had to hard reset as the toolbar disappeared. Took a photo of the last error message. I was just reading a pdf and using firefox at the time.
Is fedora usually this easy to hack?
Anyone know what happened here or what I need to do? I'm running Fedora 12 and had the nvidia video driver setup and working perfectly from rpmfusion repo ... I just did a yum update and now my display is stuck on 800X600 ....
View 14 Replies View RelatedHaving just updated various files including the kernel using Package Manager I no longer seem to have the correct version of the Nvidia graphics driver. On previous updates this has been done automatically by the "kmod Nvidia" Metapackage. My last kernel was 2.6.32.19-163 fc12.i686.PAE and the Nvidia driver for that did get downloaded correctly. Looking on Yumex I cannot see a driver for this latest kernel listed.
View 10 Replies View RelatedI updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
I've been trying to get the Nvidia drivers from the nvidia site installed by running-devdriver_4.0_linux_64_270.41.19.run
I have a GeForce 210 PCI Express DDR3 graphics card. I've recently screwed an old version of fedora trying to do this and ended wiping it and installing Fedora 15. I managed to get the standard setup working nice with dual screen support and Tux Kart working smoothly which has never happened before with ATI cards.
The reason i've tried to get an NVIDIA card working is so that i can try to do some development with CUDA. To do this i need to get the proprietary driver working. To get the install program working correctly i've edited the kernel options in grub.conf to stop nouveau driver which seemed to work. The next step i got onto was the need for the kernel source which i've installed. The program can't find this, even with a load of Symbolic links giving-
/usr/src/linux-2.6.40-4
/usr/src/linux
/usr/src/2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4.fc15.x86_64
/usr/src/linux-2.6.40-4
all pointing to-
/usr/src/Kernels/2.6.40-4.fc15.x86_64
After following the steps of dozens of guides, i now cannot run games that need 3d support and i'm no further in getting the proprietary drivers working. Coding in CUDA is a distant dream after weeks of faff in my spare time to go 2 steps back and one forward...
Does anybody know how to do all this? If anybody could help me i'd be very grateful. I've never had decent graphics support in linux. Everytime i've tried it's ended in a horrible mess!
I had the 180.xxx nvidia drivers on my FC10 setup.I installed the 185.xxx and am running into issues. It gives me the fatal server error: no screens found message. Before that it says that the nvidia kernel module is 180.xxx and the driver component has 185.xxx. I can't seem to figure out how to uninstall the previous module to make this work. I removed the yum kmod nvidia. I'm running this using sh nvidia.185xxx.xxxx.run . The weird thing is that it sometimes would work but then I would restart and it would break again.
Thanks in advance,
im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:
-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device
i ran yum update which updated kernel to 2.6.31.9.174.fc12.i686.PAE. Now after logging in i get a blank white screen. With previous kernel updates i have had no such problem. Anyway, the boot messages are following:
Quote:
checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.31.9-174.fc12.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until one is found [WARNING]
Driver already disabled
I have a GF 6600 video card.
Code:
# dmesg | grep nvidia
nvidia: module license 'NVIDIA' taints kernel.
I searched around and found out the kernel accepts only GPL modules, which is pretty dumb. People recommended using rpmfusion's akmods, but that's what I'm using to begin with.
How can I fix this without having to recompile the kernel?
Code:
# uname -r
2.6.35.6-48.fc14.x86_64
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
I read somewhere that if you run nVIDIA, that a PAE kernel won't work with it. Not supported, IIRC... Any truth to this? - My linux is (so it seems anyway) OK & I'd rather not mess it up. But I WOULD like to "use" all 4G of memory I have.
View 11 Replies View RelatedI have just updated my kernel to version 2.6.38.8-35 in Fedora 15, it now refuses to boot that kernel. I just get a lot of text on the screen and nothing happens. I can ctrl-alt-fn to get to a prompt, but I do not know how to fix the nvidia problem.
When I edit Xorg.conf and replace 'nvidia' with 'nv' the new kernel boots but only to fallback mode, trying to then re-install the nvidia drivers shows them to be already installed and I can get no further.
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
im having an intel E2180 processor with 2 gb RAM and an nvidia 8400gs graphics card. Lately i installed Fedora 12 on my system and found that with default settings the desktop 3d is not working. so installed the kmod-nvidia using yum after following the instruction.i also edited the grub.conf file to rdblacklist=nouveau to blacklist nouveau drivers.
Then once i rebooted i found two kernels in grub ie the old one and the one with PAE extension. when i booted into the old kernel its Xwindows failed to load showing a black screen and when i tried the new PAE kernel it booted in 640 x 480 resolution. {earlier i was getting a resolution of 1440 x 900 on my 17" widescreen monitor}. it also showed that the nvidia drivers failed to load. I also read in some forums that the PAE kernels are for systems with 4gb+ of ram. So i thought it better to reinstall the whole thing.
then i reinstalled the whole operating system using my fedora 12 dvd and performed the 'upgrade or replace the existing linux distribution'. interestingly now my older kernel has disappeared and the PAE kernel is the one that is remaining.
[Code]...