Fedora :: Gnome-system-monitor Won't Close Anymore
Aug 1, 2011
Since one of the recent updates, I cannot close the System Monitor anymore. Opening it, no problem. All processes are listed just fine and I can force close anything that gives me trouble but... When I want to close System Monitor again, nothing. Qtrl + Q, the X close button at the top right, Alt + F4... all do nothing. And although each time I see some disk activity, there is nothing in the logs.
Another thing I notice is that both dbus-daemon and gnome-system-monitor use about 40% CPU time each, taking the system to 100% CPU usage all the time.Luckily, I have System Monitor open so I can select the process gnome-system-monitor from the list and hit Terminate Process. I did not find anything about it in these forums. Anyone noticed this too or am I the only one?
View 2 Replies
ADVERTISEMENT
Nov 4, 2010
the gnome-system-monitor in fedora 14 do not sho the distributionrelease in the system-tab. The place for the distribution release is empty.
View 7 Replies
View Related
Nov 4, 2010
can anyone please tell me which package provides the gnome system monitor applet (the one which can display cpu load and disk I/O in the tray)?I run XFCE on F14/x64 and would like to display it using the XfApplet.
What i've tried already:
*) Installed the "GNOME Desktop Environment" --> Nothing changed
*) did a yum provides "/usr/lib64/bonobo/servers/*" to check which packages are providing applets - didn't found anything which sounds like the system monitor applet
The XfApplet shows up a bunch of available applets but not the system monitor ...
View 7 Replies
View Related
Jul 11, 2010
In the gnome-system-monitor, on the "Processes" tab in the "View" menu, I should be able to choose between "Active Processes", "All Processes", and "My Processes". The chooses are all greyed out and I am only able to view "My Processes".I launched the app as root and had the same lack of choice.I also disabled SELinux and rebooted the machine.
View 4 Replies
View Related
Aug 19, 2009
A couple of weeks ago, my keypad stopped working. Not only the numbers, but all keys there. I heard it is a setting in Gnome, but I can't seem to find it.
View 2 Replies
View Related
Feb 2, 2010
I`m running openSUSE 11.2, with GNOME 2.28 - made a fresh install.
Everything went smooth and nice, and I did not made any changes to my system, when I saw that GNOME System Monitor freezes when clicking on the "System" tab.
View 6 Replies
View Related
Apr 22, 2010
Does anybody know of a good alternative to gnome's system monitor? If you know of one; can you give me a link to the site?
View 4 Replies
View Related
Aug 17, 2011
I'm using ubuntu 10.04. After update to 2.6.32-34 kernel gnome-system-monitor craches(sometimes freezes) when switching to processes tab.
kernel.log :
Code:
Aug 17 15:14:26 evaliauka kernel: [11308.858611] BUG: unable to handle kernel paging request at fffffff3
Aug 17 15:14:26 evaliauka kernel: [11308.858617] IP: [<c024d582>] vma_stop+0x12/0x30
Aug 17 15:14:26 evaliauka kernel: [11308.858623] *pde = 00855067 *pte = 00000000
Aug 17 15:14:26 evaliauka kernel: [11308.858626] Oops: 0000 [#3] SMP
Aug 17 15:14:26 evaliauka kernel: [11308.858629] last sysfs file: /sys/devices/virtual/net/tun0/statistics/collisions .....
But:
Code:
sudo gnome-system-monitor
works fine and shows all processes (owned by root and by my user evaliauka)
View 9 Replies
View Related
Sep 26, 2010
since a few days (maybe one week and after an automatic upgrade), I could see a strange behavior of gnome-system-monitor. After a boot, everything is normal. But if I log-out, and then log-in again, the problem begins. Impossible to close the gnome-system-monitor window (by clicking on the window upper-right close button). I have to terminate the process. And this process takes about 50% of CPU. In the same time, a dbus-deamon process takes the other 50%. When I terminate gnome-system-monitor process, the CPU use drops down to 6%.
View 5 Replies
View Related
Jan 29, 2011
I'm using Ubuntu 10.10 server edition on AMD 64-bit machine. When I try to open system monitor(system->administration->system monitor) it's not starting. Then i use console to open system monitor using command #gnome-system-monitor then it gave me the following error on the console.** (gnome-system-monitor:19279): WARNING **: SELinux was found but is not enabled.
*** glibc detected *** gnome-system-monitor: malloc(): memory corruption: 0x0000000000881d80 ***
======= Backtrace: =========
/lib/libc.so.6(+0x774b6)[0x7f1ec27054b6]
[code]....
View 2 Replies
View Related
Jun 4, 2011
No where are how enable get back minimize resize close buttons windows top tab Fedora 15 Gnome3 gconf2
There is a question about this in this thread but the thread title did not have any of the above words in it and since most "new" folks don't think to use the "posts" option, I thought I'd make a new titled post.
This seems to be a big irritant of a lot of people around the net with Gnome 3 so I'm going to confirm what other people have said about how to fix the situation.
In "add software" enter this search term:
gconf
You will see quite a few returns, you should click the following:
A process-transparent configuration system (G Conf1-2.3 yada yada)
Graphical Gconf untilities (it may be pulled with the above however).
Install it/them.
One can then type "Gconf2" in terminal and it will open but then close when the terminal is closed, or one can go to activities/applications/tweak advanced settings( the symbol will be the same as for settings in Gnome 3).
In the "Shell" button one will see "Arrangement of buttons on the title bar". Surprisingly, "All" will already be apparent. One need merely verify that it is on "all".
Close gconf.
Nothing will have happened in terms of new buttons even if one closes and opens, say FireFox.
Then reboot.
After the reboot, all three buttons will be present.
There are not a LOT of configuration items in gconf2 but this one seems to be of paramount importance to a lot of people.
One can also do it from command line, and if someone wants to post that please feel free it won't hurt my feelings.
View 7 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Jan 11, 2010
9.10 Problem with Graphics/3D and other I have a Thinkpad T42, 1.7GHz, 1Gb Ram and a Radeon 7500 Graphics card. Everything that I am having trouble with works just fine in Ubuntu 9.04(except for the sound). There are two problems that I think are linked or really the same. First off, When I turn off Compiz(Compiz works by default) then gnome-system-monitor does not work properly. At least the graphics side of it; the window appears black with random lines running threw it. The same thing will happen to Gnome-do if Compiz is off.
The second problem is getting 3d support to work. I installed and tried to run blender and I got this from the terminal:
[Code]...
Then it ether does not open or the computer locks up completely and I have to force a shutdown. Which ever one it does I do not get my desired results. When trying to do chess in 3D it tells that I have 'No Python OpenGL support'. So I install the python-opengl package from the repositories; the program now just errors on start and I had to uninstall python-opengl to get Chess to work again. I have tried all this with Compiz on and off with the same results. Anyways thats about it, unless somebody knows how to setup the sound so a program won't lock it from other, then thats all I am having trouble with.
[Code]....
View 3 Replies
View Related
Sep 5, 2011
When i boot my PC, i get this in my Fedora 16 distro. I have tried as following but none allowing me to boot anymore.
Grub loading.Welcome to GRUB!
error: file not found. Entering rescue mode...
grub rescue>
grub rescue> ls
(hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1)
grub rescue> ls (hd0,gpt2)/
./ ../ lost+found/ memtest86+-4.20 grub2/ System.map-3.1.0-0.rc3.git0.0.fc16.i686 config 3.1.0.0.rc3.git0.0.fc16.i686 grub/ vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 elf-memtest86+-4.20 initramfs-3.1.0.0.rc3.git0.0.fc16.i686.img initramfs-3.1.0.0.rc4.git0.0.fc16.i686.img System.mpa-3.1.0.0.rc3.git0.0.fc16.i686 config-3.1.0.0.rc3.git0.0.fc16.i686 vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686
View 2 Replies
View Related
Aug 8, 2011
I recently switched from fedora 14 to 15. Today my computer suddenly shut down during an update, as I thought it overheated I decided to clean the cooling system and reapply thermal paste. However, now the system won't boot anymore ("kernel panic - not syncing : VFS: unable to mount root FS on unknown-block").
I would like to either solve this booting problem, or mount the fedora 15 filesystem and recover some files. Whichever is easier.
I have another drive with fedora 14 (antec below) which boots fine:
Code:
View 4 Replies
View Related
Jun 11, 2010
About three weeks ago I bought a new PC and installed Debian Squeeze. I have a Samsung SyncMaster 2494hs monitor connected to it. Until about an hour ago the monitor resolution was 1920x1080 and there were no problems. Anytime I clicked on system -> preferences -> monitors, the monitor preferences displayed the monitor name (Samsung whatever) as well as the resolution (1920x1080). An hour ago I did my normal daily upgrade via synaptic (synaptic -> mark all upgrades -> apply). When the upgrade were finished, the system indicated that a restart was required, so I restarted.
After the reboot, my monitor's resolution is set at 1152x864. System -> preferences -> monitors shows the monitor name as unknown and the max resolution available is 1360x768. Xrandr shows the max available resolution as 1360x1360, which is obviously wrong. According to discover I have an ATI graphics card. I've also run ddcprobebut that outputs about 15 lines and then stops with edidfail. I do not have an xorg.conf on my system or, if I do have one, it is not in /etc/X11.
View 11 Replies
View Related
Jul 4, 2011
I am using lenovo laptop and I have docking system, to extend another monitor on my desk for display.
Laptop 15.6 inch: 1600-900(16:9)
Acer 21 inch : 1920x1080 (16:9)
How to setup in fedora, so I can have both monitor display same screen, with respect of their resolution? When I click "MIrror displays" the resolution gets messed up. I want to use my monitor for the main use and close the lid of the laptop.
View 2 Replies
View Related
Mar 13, 2009
Many people have multi-core cpus supporting frequency scaling now, if you want to see if the workload is being evenly distributed then add as many CPU Frequency Scaling Monitor applets to the Gnome panel as you have cores/cpus. Then right-click each one and select preferences and choose which cpu to monitor.
Now compile a large program or run a cpu intensive game and watch how the workload dances around between the two (hopefully)
Some clever apps like gnome chess will multi-thread and make max use of both cores, sadly many others won't.
View 9 Replies
View Related
Oct 28, 2010
I am using F13 on my netbook for a week so far. Its worth mention, I am completely new new to Linux. Want to say many thanks to Fedora developers for such a great OS, it makes me really happy.
Now, on the subject, I have a very small monitor 1024x576, this is causing difficulties with GIMP, and more, I found that GIMP is too much 'overfeatured' :-( . Searching on this forum , I found posts about 'Kolour' for KDE desktop. Maybe you can recommend a similar simple image editor for Gnome desktop? Crop/resize and pencil tool where i can pick up color and draw pixels will suffice most of the time.
Also I am using Firefox a lot and thought whether it possible to get a small feature , I will try to describe it: when the window is maximized I want to hide the window's header and menu, which would give me extra 40-50 pixels height to the contents of the window.
Yeah, I know I can hide navigation bar, but how then I will type the page location?
View 4 Replies
View Related
May 1, 2010
It used to work perfectly on Ubuntu 9.10 but I get "input not supported" in the secondary monitor.
View 9 Replies
View Related
Mar 6, 2011
I see the gnome 3 was release,It need to burn a CD‚But I want to update Gnome 3 from Gnome 2.32 in my system.
View 2 Replies
View Related
Aug 18, 2015
I bought a hp envy x360, and I have installed debian 8.1 and I have some problems with GNOME.
I am running session and it works fine, but after some time it is closed suddenly and after I can't start session.
View 0 Replies
View Related
Aug 23, 2010
I like the features of Terminator very much. It save my time. But on 2.6.31-gentoo-r10, I got a little problem: after typing 'exit', the system echo 'exit' and hang at with a mouse cursor (can't type anything):
Code:
quanta@dhcppc6 ~ $ exit
exit
[code]....
View 3 Replies
View Related
Mar 26, 2010
I can't make use of the Gnome log file viewer anymore. Seconds after I start it, it will gray out and proceed to steadily lay claim to all my available RAM. It doesn't matter which log I choose, or if I don't choose one at all. Same thing. I have 1GB RAM, and when I took the included screencap the log viewer had taken almost 80% of it. It was at 90% before I forced a shutdown of the process. Does anyone have the slightest idea what might be causing this?
View 1 Replies
View Related
May 10, 2010
I don't know whether it has to do with Googles revamp of their search page or something else but it doesn't work any more.
Typing:2+2 =
Results in:"Google Calculator could not evaluate the expression."
I'm using Ubuntu 10.04. GNOME Do 0.8.3.1
View 5 Replies
View Related
Apr 18, 2011
I recently installed FC14 on my system as I was previously on FC8. Everything seems to be working fine, but I ran into an issue today where I wanted to kill firefox. I checked in gnome system monitor and I did not see a running process for firefox or firefox-bin. I also ran a "ps -e" command from a terminal as root and did not see it there either. I don't know if this is a fedora issue or a firefox issue, so I am posting it here first.
And just to vent on something that IS a firefox issue. I have the new firefox 4 running and when I click the X in the top corner, it doesn't give me the option to save my current tabs and exit like the previous versions did. That was a feature I liked.
View 2 Replies
View Related
Feb 23, 2010
I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
View 2 Replies
View Related
Mar 17, 2010
I have recently added a new keyboard layout - international U.S with dead keys - so I can type accentes and so in spanish. Ever since that gnome-terminal doesn't recognize the shortcuts keys like <ctrl>r or <ctrl>c and I get my other language charecters instead. thats happen with any keyboard layout I swith to. Furthermore, <alt><ctrl>+F1...F9 doesn't work either.
View 5 Replies
View Related
Feb 26, 2011
I have Fedora Linux 13 64bit system. I use System Monitor to check which process is taking how much memory and cpu. Normally I have dozens of Chrome and Firefox windows open. The Processes tab shows which process is taking how much cpu/ram resources but I unfortunately there is no option like right click and make the window active that matches the PID (the one process that I have currently highlighted). Usually there is a chrome process taking up 30 or 40 percent of CPU while dozens other chrome processes taking much less cpu. I must determine which chrome window ( or any application which has multiple instances running) is taking that much CPU time. So can some one help me to solve this problem?
View 1 Replies
View Related
May 2, 2010
System:
Gateway box
P4 3GHz processor
1 GB RAM
one 40 GB Western Digital IDE Hard drive
one 500 GB Western Digital IDE Hard drive
NVidia-GeForce FX 5200 DDR 128MB Video Card
Hauppauge HVR-1600 Tuner Card (with accompanying remote of unknown model #)
Creative Sound Blaster X-Fi Card
Ran Lucid upgrade on a mythbuntu box on Friday. On startup, though, the desktop looked quite odd - in fact, I didn't even know it was my desktop at first. It was a small white terminal 'window' in the upper left corner of a black screen. My mouse was responsive, because I had to mouse over the 'window' before I could type. I say 'window' because it had no toolbar, and I couldn't move, resize, or close it. No top or bottom panels on Gnome. it was so unrecognizable I didn't initially think it was my desktop. I assumed it was nvidia drivers, and spent a long time making sure they were installed - they do not seem to be the problem. After searching forums/internets, found several pages telling people to rename/move/delete .gnome, .gnome2, etc and gnome should revert to default. Problem persists. I can open gedit or firefox by running from command line, but when I close those windows, the image of those windows remain as part of the background.....
View 4 Replies
View Related
