I installed vsftpd on my fedora 15 system. I tried to edit vsftpd.conf through gedit
(as root su - command). It showed an error message. I couldn't edit this file. Is there any way to revert my system to gnome 2.30(which is better to work ) from gnome 3
My PC running 11.04 was showing a blank screen after every 10 mins while watching BBC iplayer (with all the screensaver and power saver settings switched to over 1 hour). The picture returned when I moved the mouse but it was still annoying.
So I googled for a solution and found this page [URL]. Based on this, I did the following in terminal:
"sudo gedit /etc/X11/xorg.conf"
Then when the text editor came up, I deleted 'EndSection' from the xorg.conf file, and added the following lines:
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
My problem: upon rebooting the computer, I just got a purple screen with the Ubuntu logo, it went no further. I tried booting with the livecd and removing the lines I added, but it wouldn't let me save the file. I also tried booting into recovery mode but I'm not very adept at the command line navigation stuff, so I don't know how to find or re-edit the file.
I wanted to save a bit of ram and so removed wicd from startup. I deleted rc.wireless.conf and edited rc.inet1.conf as per the instructions. A connection is made at startup but it seem to drop quite often ( not too hard to restart, but a bit of a pain ). I am running a k-2.6.37 with a zydas usb zd1121 chip
Quote:
# /etc/rc.d/rc.inet1.conf
#
# This file contains the configuration settings for network interfaces.
# If USE_DHCP[interface] is set to "yes", this overrides any other settings.
[Code].....
I have Natty Narwhal and everything was working. Then I moved it to my HDTV, and I had overscan issues. Following some advice I found online, I edited /etc/X11/xorg.conf with new information including a ModeLine.
Upon restart, I get my BIOS screen, the Ubuntu splash, then... nothing. The display goes to sleep. I can ping the computer, and everything seems to work except I have no video.
I did backup my xorg.conf file, but I don't know how to get to it without a display. Hindsight tells me I should have given myself a way to remotely control my computer before messing with xorg, but you live and learn.
I've read online that there is a way from the login screen to get to Terminal without loading the desktop environment, but I can't get to the login screen.
I've also tried using a Linux LiveCD to access my filesystem, and that works to view files, but I have no root privileges.
Is there...
...a way to get to Terminal without loading the login screen?
...a way to give myself root access to my harddrive from a LiveCD?
...something else to try?
I tried to edit my xorg.conf to try and encourage Debian to handle my joypad better (stop recognising it as a mouse). However, it didn't work and i couldn't get back into X.So, i entered recovery mode and deleted the contents of xorg.conf,got back into X and then edited xorg.conf back to how it was.Right so far so good.Yet, now i cannot use the backlash key in keyboard shortcuts. I have a number of shortcuts set up to incorporate this key and they no longer work, neither in GNOME nor Openbox
View 2 Replies View RelatedI'll preface this by saying i'm by no means an expert on Linux. A competant beginner at most.We have a dedicated server, the 'resolv.conf' was changed, specifically the domain that was listed (this is the primary domain).I only became aware of this change, when we get into work on Friday and all our sites were down - I attributed this to DNS fault as if I changed my host file (I work on a windows machine) and specifically routed to the domains to the correct IP address, the websites were served fine.I tracked down the resolv.conf change by quizzing a collegue. I then switched the resolv.conf file back to it's original state - luckily a backup was made so I am 100% sure that the current resolv.conf is the correct one.
change was made Friday morning, around 9.30am (UK time). It is now 5.05pm (UK time). The original change was made sometime on Weds afternoon, and the sites stopped serving between Thursday night and Friday morning.Does anyone have any idea how long it should take for the fix to be picked up? Will it be picked up? I just started to think that the change can't be picked up due to some DNS related voodoo.
On a KDE4 environment after downloading some music from rapidshare with JDownloader the archives self-extracted with the symbol in some of the file names. Those files couldn't be renamed or deleted, the file manager said that the files didn't exist - very weird. The files should have had some swedish characters in their file names. Now I'm stuck with those files on my machine. Anyone knows how to get rid of them?
View 2 Replies View RelatedTwo video files on my external hard disk refuse to be deleted, renamed or moved. They keep giving the following error message
Error removing file: No such file or directory
or
Error renaming file: Input/output error
I'm taking over as a Linux admin where they use sendmail last week. I've done very little with email on linux, and haven;'t touched sendmail since 2000 so I am really out of my element.Basically the sendmail server for many months has had performance problems, disk, and load.Looking into it I found this doing a tail on /var/log/MaillogAug 25 17:11:49 web8 sendmail[1531]: o7OGF2VH002566: to=postmaster, delay=1+01:58:10, xdelay=00:00:00, mailer=relay, pri=2388694, relay=[xx.xx.xx.xx], dsn=4.0.0, stat=Deferred: [10.10.20.107]:No route to hostAnd that was all it was spewing, I edited the config files because xx.xx.xx.xx doesn't exist. And running m4, then restarting sendmail.It is still spewing out that message, but I do see some things connecting to the new yy.yy.yy.yy address. I even greped the entire /etc looking for the old machine.
View 2 Replies View RelatedI've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View Relatedcreate a VM here with virsh. I've managed to create the XML file and got it to work properly, however running it is the problem. These are the errors I get error: Failed to start domain Cent-OS, internal error process exited while connecting to monitor: open /dev/kvm: No such file or directory ,Could not initialize KVM, will disable KVM support qemu: could not open disk image /media/55D123D9E79ABF54/VM/Cent-OS-5.5.img: Permission denied
I've tried setting SElinux to permissive mode.
Fedora 14 X64
hypervisor qemu
XML:
[code]...
I switched back to Fedora after a long time and wow a lot of things have changed! Fedora 12 is looking amazing and the best part is I could install it on my USB so easily. And then I found I couldnt open any PDF files on Fedora - I tried installing AdobeReader, xpdf and openoffice. All of them are just throwing some file format errors.... <I cant push a screenshot now since i removed the packages>
Initally i thought it might be some version conflict but it turned out I couldnt open any pdf's including docs from 5 years back to docs with embedded media content. I know I havent put any info here. I am looking for a little info on what is needed to get Acrobat/Xpdf working in Fedora 12... And I couldn't get any errors logged so I'd like a little help there if I need to share some debug messages...
that gave these messages [root@localhost Presentations]# evince module-development.mgp.pdf
** (evince:5768): WARNING **: Failed to create dbus proxy for org.gnome.SettingsDaemon: Could not get owner of name 'org.gnome.SettingsDaemon': no such name
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
I need to change a game's screen resolution in a couple of .con files, but when I double click on them all I get is success in a little pop up window. Can I move them to my computer, edit them with a text editor, and reinsert them with read only privileges?
View 2 Replies View RelatedI am trying to configure Fedora 11 Samba PDC with LDAP backend. All information on how to was obtained at http:[url].......The Howto is not complete. However, I have a real problem when configuring ldap.conf and slapd.conf as I will replace the domain acpng.org.pg with the examples. The problem is when entering the following:
URI ldap://127.0.0.1/
HOST linux-srv1.pqrst.org.nk
BASE dc=pqrst,dc=org # now here, do I put another dc=nk for the
Where can I find the httpd.conf files in FC11 ??
View 1 Replies View RelatedI'm trying to set up some shares on this pc and every time I try to edit the /etc/exports file I get this error. I get the same error when I try to edit /boot/grub.conf file or any other files. Does not matter what editor I use. I'm running f14.
View 3 Replies View RelatedI use RadHat Linu5.We usually log in to LINUX via putty (remote). Very often many people use the same user and password to log in.I wonder how to tell who has edited/modified a file?
View 9 Replies View Related1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
I have just finished an install of Cent 5.5. I loaded up a trunk for a software application I want to compile on cent, but I cannot read the .cpp files. The issue seems to be with the file extension. If I change the extension to .txt, they open just fine. My .FOR, .FPP, and .DAT files display fine, but the .cpp and .h give me an error, "Couldn't display...". What is the problem here that won't let me open these files in gedit?
View 5 Replies View RelatedIn order to upgrade a machine that can not successfully upgrade to 10.4 I downloaded and burned the 10.04.1 iso image off the ubuntu alternate download site. In my first attempt I unsuccessfully burned the image with it failing at the very end. I did perform an md5sum on it and received the precise output I got from my second burn attenpt which DID complete successfully. Here is the output:
[code]...
I did research this last night and it seems the common wisdom was to reburn the iso (which I did twice) or copy down the iso again. This I also did and it came down precisely, bit for bit, the same as the first one. Here are the two cksums
[code]...
Is there something wrong with this image on the website or is the error about 1 file being unreadable (could that also mean missing?) be erroneous?
i am currently working on ldap server configuration and i had made changes on smb.conf file but i don't know how to save these change. am using ubuntu 9.10
View 1 Replies View RelatedI have a pdf file (nasm documentation) that used to be displayed perfectly with xpdf, but now all code example lines remain blank. On the terminal I get repeated lines such as:
Quote:
Error: Couldn't create a font for 'Courier Bold'
Error: Couldn't create a font for 'Courier'
I tried to figure out the problem... the same problem occurs with both evince and okular. However it does not occur when opening the same file under root (tested with xpdf), so it seems to be some permission problem. I tried searching on the error message but couldn't find a working solution.
The thing is, I've created a new local zone here (called "local.lan"), and, aparently, it is working fine, and DHCP3-SERVER is updating DNS info through the controls.But sometimes I get some strange answers from the server, like when I do the "arp" command in one of the clients, and get the server's hostname "mixed" with it's own reverse, like this: "dns.local.lan.2.168. | ether | 00:02:1e:f5:61:74 | C | eth0". Other thing is that sometimes my DNS don't update when a computer "enters" the lan. In the /var/log/syslog the DHCPOFFER appears, but the information about the DNS update isn't there.So, I would like to show you my named.conf file and my local zone db file, and get some feedback from you (what would you change... what is wrong...).
# ------------------- #
* named.conf:
# ------------------- #
[code]....
I need to create .conf and .load files for php. PHP is installed and I've verified PHP with
test.php <?php
print_r (phpinfo());
?>
Is there boilerplate available for creating the .load and .conf files? I am having trouble finding it in what's been installed.
How can modify httpd-xampp.conf's permission on my opt/lampp/etc/extra/ directory? I tried chmod-ing it on terminal, there's no error message whatsoever on the terminal but it still can't be modified.
View 1 Replies View Relatedi was trying mrtg, but when the light go off the graphics get distorted. Trying to adjust the conf files i get nothing than trying rrdtool but i keep having the same problems. So i was thinking to use php, i got working php snmp walk function but i am looking the way to get the bandwidth or usage of the device from snmp or any snmp function but still now i keep searching. Once done this stages i would be able to save the data into an array and the plot it into a graph and personalize the max and min values for avoiding distorted graphs.
View 4 Replies View Relatedwhat's the difference between the following 2 methods for specifying in httpd.conf to use PHP to parse files with extension .php?
Method 1
AddType application/x-httpd-php .php
Method 2
LoadModule php5_module modules/libphp5.so
<FilesMatch .php$>
SetHandler application/x-httpd-php
</FilesMatch>
I was running an update to updgrade firefox to the latest version. the update timed out and now when i boot the laptop i get the command line login. Typing startx brings a screen with a black cross in the middle and a black and white background.
In the boot process a lot of errors are coming up saying "conf files need .conf". Also i have noticed an error that says the xorg.conf file is not where it should be. I know this is responsible for graphical boots so could be my problem. However yast and network services are also not working in the command line so i am unable to update to fix this. I installed from a live CD so im unsure how to use this to repair my system?
I cannot seem to find where the conf files for NetworkManager are stored in suse 11.3. I want to manually edit my IP address without using the gui.
View 5 Replies View Related