How can modify httpd-xampp.conf's permission on my opt/lampp/etc/extra/ directory? I tried chmod-ing it on terminal, there's no error message whatsoever on the terminal but it still can't be modified.
View 1 RepliesI have a strange problem after downloading a movie file. I noticed that I don't have permission to delete or change anything on this folder and files within it. I am attaching a snapshot image of the folder. please someone help me to delete this from my computer.
View 2 Replies View RelatedI've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies View RelatedIf I run this as su I get the same thing. If I log on as root user It is the same as well
View 5 Replies View RelatedThe local DNS server is slow, so I added the openDNS servers to /etc/dhcp3/dhclient.conf. But Network manager keeps appending the local DNS server to resolv.conf. I need to pick up a DHCP address but how to stop it changing DNS servers?
View 2 Replies View RelatedI am using Xampp on ubuntu 10.04 and I have set my document root to a folder in my home directory for ease of use with netbeans. There are several times where I have to manually go and change the permission to 755. If you just place a file in the directory it does not default to 755, seems odd since the document root folder is in my home directory. Chmod works fine but I was wondering is their a way to make all files or folders added to my document root to default to 755?
View 2 Replies View RelatedI had Fedora 8 installed in few clients and a server (same server for NFS and NIS), and NIS and NFS configured, and was working fine. Yesterday, I upgraded few client computers to Fedora 15 (server is still same), and configured NFS and NIS client. NFS is working fine, I can see home directories.
For NIS: ypwhich, ypcat passwd gives me correct uutput, ypbind is running. The problem is, I can't login to NIS client. The error is: Permission denied, please try again. My nssswitch.conf is
[Code]...
ver: 9.10 how do I restart dhcp3 after changing dhcpd.conf?
View 3 Replies View RelatedMy Internet connection runs slow and jerky, but can be fixed by using the Google public nameservers instead of the default one in this file. Problem is, the changes keep being reverted, even when I chmoded the file to have read-only permissions by everyone.
How can I change the nameserves permanently?
So I'm trying to get two fingered scrolling on my Ubuntu 10.10 netbook. According to advice fromhttp://ubuntuforums.org/showthread.php?t=516798I created an xorg.conf file in etc/X11 and put Option "VertTwoFingerScroll" "1"Option "HorizTwoFingerScroll" "1"in the file. I restarted my computer, and now it comes up withUbuntu 10.10 [Computer name] tty1[Computer name] login:Not only has this not happened before, I have no idea what to put for my username and password.
View 3 Replies View RelatedI have three users in samba file user1
user2
user3
and I have share1 and its subfolder " subshare " the thing i have to do is that, i have 2 assign user1 and user2 to share1 that means user1 and user2 can only access share1 through password and user3 can access only its subfolder "subshare" i have done this upto first level permission of share1 not able to do for its subfolder "subshare"
I am administoring a few websites and the latest website to be deployed has a few "unable to check htaccess file, ensure it is readable, referer: " errors in the apache-error log.
That is fine, becuase the directory doesnt contain a .htaccess file.
Is there a setting whereby I can turn off this error ?
I dont want to turn off checking for .htaccess files because some directorys have this file and use it.
I Have been trying to change a file in filestarter using sudo /etc/rsyslog.conf. but am getting a permission denied message. How do I get into this file to change it ? Firestarter is working ok but for some reason it cannot open the system log. I Have found what amendments need to be made to get this to work but simply cannot get access to the file
View 2 Replies View RelatedMy shell script runs from the command line, but fails in cronjob. /bin/sh: asper.sh: Permission denied
-rw-r--r-- asper.sh I guess the permission should look like '-rwxr-xr--' How can I change the permission to be like that?
I just setup a FireWire audio interface. Everything works fine, except for I need rw-rw-rw- permissions on /dev/fw0. I can always sudo chmod 666 /dev/fw0 just before setting the thing up, but then it will be gone on the next rebooting.The solution to modify /etc/udev/rules.d/020-permissions.rules (which is for Ubuntu Breezy) doesn't go well for Ubuntu 10.10 Maverick because there is no /etc/udev/rules.d directory.
View 1 Replies View RelatedIs it possible to change the general permission denied error. I have some rather young users on this system that think they can "hack the gibson" and I would love to change the general error message to something a little more rude/funnyex:# cd restricted area
-sh: cd: restricted area: Permission deniedI am curious if its possible to change the error message in general?ex:# cd restricted area-sh: cd: restricted area: (funny/rude message goes here)Quick info:This is a Gentoo 2008.0 system, I would also love to do this on my slacware and OpenBSD boxes as well just for kicks.
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
I couldn't able to change file permission of files residing under /media/* Under /media all the NTFS partitions are mounted manually (gnome GUI) using root password. File properties of file under those NTFS partition shows SELinux context is "fusefs_t". I guess this is prevention from changing permission of file. How can I over come this?
View 9 Replies View RelatedI installed dhcpd using:
Code:
Now when I try to run it, I get this weird error:
Code:
The error was:
I changed permissions to 777:
Code:
To no avail!
It's got something to do with AppArmor.
I don't think it is installed on this system:
Code:
I had used test desk program to restore my files ,the files that recovered was saved in home folderthe problem is that these files are become root permission only ,so i cantcopy , move theme
View 3 Replies View RelatedIt's been a short while since I had to put lampp on ubuntu 10.04. But, nevertheless I got it running eventually. I cannot seem to get it working on 10.10. Has anybody had experience with this yet? If so, what did you do to get it to work? Also, what differences does anybody know of that is preventing it from installing on 10.10 via the routes it would install on 10.04?
View 3 Replies View RelatedI had xampp going, but it got messed up and mysql wouldn't start. I thought reinstalling wou;d fix it, but it didn't.
when i do:
Code:
sudo /opt/lampp/lampp start
i get:
Code:
Starting XAMPP for Linux 1.7.3a...
[Code]....
i have been trying to host a site with lampp in ubuntu and i am pretty lost and sick of all the error messages, maby somone could give me a step by step guide how to do it. or got a bether option ?
View 8 Replies View Relatedcreated a user but i forgot to change the home directory permission.so after user created when i go to the user and group mangement i cant see that permission filed related to the home permission directory.my purpose is to stop accessing other user to my home directory,how it can be possible??
View 4 Replies View RelatedDoes anyone know if you can reconfigure webmin to use the lampp services instead of the default server services (e.g. apache, mysql, etc.)?
View 1 Replies View Relatedi am currently working on ldap server configuration and i had made changes on smb.conf file but i don't know how to save these change. am using ubuntu 9.10
View 1 Replies View RelatedWe want to build a couple internal web apps for about 150 people to use, maybe 10 concurrently of any one app/site. LAMPP seems to be pretty simple to use for all it does, but their website has the following disclaimer at the bottom of this post, and there's some people here, programmers who like to make things way more intense/"cool" for programmers than they need to be for a small shop, who agrue that it shouldn't be used in production. I'm not really sure our internal 150 people classify as the type of "production" they are referring to below, I think they more mean a public facing site. We're never going to grow any bigger than this people-wise, or ever make these public facing sites. Just looking for some advice, as lampp seems very easy to use, as well as easy to backup and restore the entire lampp folder and get going on another server quickly in the event of a disaster.
As mentioned before, XAMPP is not meant for production use but only for developers in a development environment. The way XAMPP is configured is to be open as possible and allowing the developer anything he/she wants. For development environments this is great but in a production environment it could be fatal.
I inherited a project that someone built in lampp, and I need create new SSL certs.
So I go to do so and it says that OpenSSL is not installed and to apt-get and install it.(Ubuntu by the way)
So before I did so, I wondered if it would cause any problems...since it was supposed to be part of the lampp stack.
I have ubuntu 9.10, and installed the latest lampp with default options. Apache/Mysql/Proftpd would start and stop fine. I then did:
...which I got from here...[url] Although I'm pretty sure I was never prompted for the mySQL password. At any rate, now mySQL will not start (Apache and ProFTP are OK). Where can I start debugging this? Where is the conf file for mySQL?