Networking :: Php And Snmp - Graphics Get Distorted - Conf Files
Jun 17, 2010
i was trying mrtg, but when the light go off the graphics get distorted. Trying to adjust the conf files i get nothing than trying rrdtool but i keep having the same problems. So i was thinking to use php, i got working php snmp walk function but i am looking the way to get the bandwidth or usage of the device from snmp or any snmp function but still now i keep searching. Once done this stages i would be able to save the data into an array and the plot it into a graph and personalize the max and min values for avoiding distorted graphs.
View 4 Replies
ADVERTISEMENT
Mar 11, 2011
I was following the installation guide of SNMP client and server [URL], but when I do an apt-get install snmp scli tkmib the /etc/snmp/snmpd.conf is empty with nothing inside..
View 7 Replies
View Related
Jan 15, 2011
For some reason or the other, after some time the graphics on my computer becomes distorted. I had this issue before reinstalling my operating system, I thought that reinstalling the operating system would fix these issues, but they still remain.
Also, I never encountered this issue before upgrading from openSUSE 11.2 to openSUSE 11.3. Of course, restarting my computer fixes this issue.
An example of what I am talking about can be found here:
Specifications:
openSUSE 11.3 64-bit
Xorg-X11 7.5-11.3
View 9 Replies
View Related
Jul 12, 2010
I just installed ubuntu and found out some programs gets the graphics distorted. I attached a screenshot of the problem.
View 5 Replies
View Related
Aug 12, 2010
I'm trying to configure SNMP service to send traps to SNMP server. I've installed net-snmp-utils, now I need to configure the "snmpd.conf" file...
View 2 Replies
View Related
Mar 27, 2011
Graphics is getting distorted whenever I move windows along the screen. This happened soon after I installed KDE desktop and compiz fusion on my pc. I am having 1GB ATI MOBILITY RADEON HD 54 graphics card (Seems like that was the problem). The first fix that I tried: Installed qt-devel compat-libstdc++-33 and then created an xorg.conf file by installing system-config-display and edited the file to include radeon under drivers then restarted --> this didnt work Compiled ATI drivers for linux ---> this also dint work However, I can view the o/p clearly when I type glxgears Seems like the issue is with this. But I donno how to change this
glxinfo | grep direct -i
glxinfo | grep OpenGL -i
When I run the above command, the o/p includes direct rendering: yes" and also various OpenGL information concerning for "Mesa" but not for "ATI Technologies" I am facing this issue on KDE as well as Gnome.. In KDE, if I check activate Desktop graphics then I would get automatically logged out. In gnome if I select "Desktop Effects" then I get a message "3D acceleration not supported".
View 6 Replies
View Related
Jun 1, 2009
I've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
View 3 Replies
View Related
Jul 25, 2010
phpmyadmin files are in usr/share/phpmyadmin but i cant find anything in my apache2.conf or httpd.conf files that point to that directory.How do I find the route taken from the Server root "ServerRoot "/etc/apache2"" to the phpmy admin files.
View 5 Replies
View Related
Oct 31, 2009
I am trying to configure Fedora 11 Samba PDC with LDAP backend. All information on how to was obtained at http:[url].......The Howto is not complete. However, I have a real problem when configuring ldap.conf and slapd.conf as I will replace the domain acpng.org.pg with the examples. The problem is when entering the following:
URI ldap://127.0.0.1/
HOST linux-srv1.pqrst.org.nk
BASE dc=pqrst,dc=org # now here, do I put another dc=nk for the
View 4 Replies
View Related
Dec 23, 2009
Is it possible to change the location that the journal files are created. By default, they are created in the same location that the zone files are.
View 4 Replies
View Related
Aug 5, 2010
I'm trying to do some network bonding in RHEL 5.4, and I'm not seeing the results I expect. I have set up a number of servers using mode 1 with no issue, but I need to configure a new server differently. bond1 is created from eth1 & eth2 bonded together using mode 802.3ad with layer2 lacp bond0 is created from bond1 & eth3 using mode active-backup with bond1 as the primary interface When I bring the network services up, all traffic is passing over eth3 instead of bond1, which is the primary. Below are the modprobe.conf * ifcfg-* files involved.
My modprobe.conf:
alias eth0 e1000
alias eth1 e1000
alias eth2 e1000
alias eth3 e1000
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptsas
alias scsi_hostadapter2 qla2xxx
[Code].....
View 3 Replies
View Related
Jul 9, 2011
I have distorted sound when viewing SWF files on browsers. Tried both chrome and iceweasel. I have a Dell XPS with debian testing (64 bit), alsa is 1.0.23. Sound is working properly when playing formats other than swf.
View 1 Replies
View Related
Dec 27, 2010
I installed Ubuntu 10.04 on my sister's laptop (it's a Packard Bell; not sure about the model, but I could check); it has two graphics cards: the primary is an ATI Technologies Inc Mobility Radeon HD 3650, and the second one is an Intel Corporation Mobile 4 Series. After installation, installed the ATI driver through the restricted devices manager (xorg-driver-fglrx package, I think), and after a couple of reboots, the screen simply went black after boot and I couldn't do anything (I couldn't even switch to a virtual console, and booting on recovery mode was the same). So I booted with the ubuntu live flash drive from which I installed it, and deleted the xorg.conf file, and now I have a GUI, but it uses only the Intel card. I would like to use the ATI card if possible, but the problem is, if I use a xorg.conf file set up to use the fglrx driver, then I have a black screen, and if I use no xorg.conf file, it automatically switches to the Intel card. I also looked in the BIOS for an option to disable the Intel graphics card, but it doesn't have it (it's a very simple BIOS). So, since there seems to be a conflict between both cards, is there a way to tell xorg to ignore one graphics card? (the Intel one, in this case?).
P.S.: Here I attach two Xorg logs: Xorg.0.log is the last one (without using a xorg.conf file, and using the Intel card), and the Xorg.1.log file is the one of my previous attempts at using the ATI card.
I forgot, here is the outpput of lspci:
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
[Code]....
View 7 Replies
View Related
May 22, 2011
I recently installed VLC media Player and have been using it as the default application to view my video files.The audio files get opened in the Movie Player(the default one).But When I open the Video files in Movie Player ,The Colour gets distorted and all videos appear bluish in colour.Also the same thing happens when I open a video file in VLC after opening on the audio files in movie player (The colour gets distorted and appears bluish).
View 9 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
Aug 3, 2010
I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies
View Related
Feb 16, 2011
1. What is the difference between files (xorg.conf and xorg.conf-vesa)
2. No matter how hard I try I can't change keyboard layout in xorg.conf-vesa (I change it in file ) but there is no actually anything changing, it starts to get annoying - for example - below goes my xorg.conf-vesa, if I uncomment and set line from
[Code]...
View 3 Replies
View Related
Aug 29, 2010
I have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.
View 1 Replies
View Related
Jul 29, 2010
I need to enable SNMP on our Suse linux boxes, so that What's Up Gold can monitor them.
I need to add the community name, that I know, but where?
View 3 Replies
View Related
Mar 9, 2011
how to make mib file for snmp....
View 3 Replies
View Related
Sep 14, 2010
I have enabled SNMP monitoring in my debian box (using apt-get install snmp) and configured it to allow my PC to query the server.
I'm able to query the server and get SNMP data but when I get STG to give me a per/second graph of the interface octets, it only updates the data every 12 seconds or so.
Is this a setting in SNMP which could be causing this problem? If so, how can I enable it so that SNMP can give me up to the second octet rates.
View 5 Replies
View Related
Mar 14, 2011
2 machines (one of them working as a server to monitor the network with IP 192.168.100.110 and the other one to be monitored with IP address 192.168.100.1):
In the first machine:
snmpwalk -v1 localhost -c public sysName (working fine)
snmpwalk -v1 192.168.100.1 -c public sysName (don't works -> Timeout: No Response from 192.168.100.1)
In the monitored machine:
snmpwalk -v1 192.168.100.110 -c public sysName (it works)
snmpwalk -v1 localhost -c public sysName (dont works -> Timeout: No Response from localhost)
View 6 Replies
View Related
May 31, 2010
I'm trying to sniff snmp traps being sent to a NMS. I'm setting -s to 0 but when I start sniffing, some of the packets, instead of being decoded, show me messages like this:
Code:
[len1468<asnlen1663]
What is that supposed to mean?
View 4 Replies
View Related
May 17, 2010
I am facing issues on few machines but rest all are ok. They have the same config but I don't know what is wrong. I tried as much as I could but couldn't fix it. Here is the rpms installed on this client
[code]...
The same config is working for all clients but have problems with few machines. May be I am doing something wrong in config or testing at very basic level.
View 1 Replies
View Related
May 12, 2010
I have an issue when sending snmp traps. I have an embedded system connected to a SNMP manager. I am sending traps from the box to the manager continuosly. After sometime I don't see any trpas coming out.
I get this error message.
Cannot open file /proc/net/tcp ...
: Too many open files
Cannot open file /proc/net/snmp ...
: Too many open files
What could be the reason for such an error?
View 1 Replies
View Related
May 18, 2010
I have recently set up nagios on a ubuntu server (9.10), and set it up to monitor all the servers, switches etc, following the quickstart guide provided on the nagios website.My problem is this:I have setup the nagios-plugins, and tried to set it up to monitor the network switches via SNMP but receive the following within the nagios web interface:SNMP problem - No data received from host I tried it from the command line, and got the exact same error.Is there some further configuration I need to do to be able to get this data?I've used up all my google-fu, and read over everyone else's problems on every forum I could find, but to no avail.
View 6 Replies
View Related
Mar 16, 2011
snmpwalk -v1 -c public localhost system
No log handling enabled - using stderr logging
MIB search path: /root/.snmp/mibs:/usr/local/share/snmp/mibs
Cannot find module (HOST-RESOURCES-MIB.txt): At line 0 in (none)
SNMPv2-MIB::sysDescr.0 = STRING: Linux ipbrick 2.6.30.10-586-smp-64gb #2 SMP Mon Dec 28 14:44:55 GMT 2009 i686
SNMPv2-MIB::sysObjectID.0 = OID: NET-SNMP-MIB::netSnmpAgentOIDs.10
DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (17496443) 2 days, 0:36:04.43
SNMPv2-MIB::sysContact.0 = STRING: Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
SNMPv2-MIB::sysName.0 = STRING: ipbrick
SNMPv2-MIB::sysLocation.0 = STRING: Unknown (configure /etc/snmp/snmpd.local.conf)
SNMPv2-MIB::sysORLastChange.0 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORID.1 = OID: IF-MIB::ifMIB
SNMPv2-MIB::sysORID.2 = OID: SNMPv2-MIB::snmpMIB
SNMPv2-MIB::sysORID.3 = OID: TCP-MIB::tcpMIB
SNMPv2-MIB::sysORID.4 = OID: IP-MIB::ip
SNMPv2-MIB::sysORID.5 = OID: UDP-MIB::udpMIB
SNMPv2-MIB::sysORID.6 = OID: SNMP-VIEW-BASED-ACM-MIB::vacmBasicGroup
SNMPv2-MIB::sysORID.7 = OID: SNMP-FRAMEWORK-MIB::snmpFrameworkMIBCompliance
SNMPv2-MIB::sysORID.8 = OID: SNMP-MPD-MIB::snmpMPDCompliance
SNMPv2-MIB::sysORID.9 = OID: SNMP-USER-BASED-SM-MIB::usmMIBCompliance
SNMPv2-MIB::sysORDescr.1 = STRING: The MIB module to describe generic objects for network interface sub-layers
SNMPv2-MIB::sysORDescr.2 = STRING: The MIB module for SNMPv2 entities
SNMPv2-MIB::sysORDescr.3 = STRING: The MIB module for managing TCP implementations
SNMPv2-MIB::sysORDescr.4 = STRING: The MIB module for managing IP and ICMP implementations
SNMPv2-MIB::sysORDescr.5 = STRING: The MIB module for managing UDP implementations
SNMPv2-MIB::sysORDescr.6 = STRING: View-based Access Control Model for SNMP.
SNMPv2-MIB::sysORDescr.7 = STRING: The SNMP Management Architecture MIB.
SNMPv2-MIB::sysORDescr.8 = STRING: The MIB for Message Processing and Dispatching.
SNMPv2-MIB::sysORDescr.9 = STRING: The management information definitions for the SNMP User-based Security Model.
SNMPv2-MIB::sysORUpTime.1 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.2 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.3 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.4 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.5 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.6 = Timeticks: (0) 0:00:00.00
SNMPv2-MIB::sysORUpTime.7 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.8 = Timeticks: (1) 0:00:00.01
SNMPv2-MIB::sysORUpTime.9 = Timeticks: (1) 0:00:00.01
End of MIB
Why are some errors in the beginning of the output? How can I remove them? The file HOST-RESOURCES-MIB.txt is in /usr/local/share/snmp/mibs.
View 4 Replies
View Related
Apr 28, 2011
I have created this thread as it sis realy hard for me to send traps from my Linux workstation... I m lost with v1/v2/v3 snmp... So here is the initial configuration: (without traps)
rocommunity myrocom
rwcommunity MyL33tP4ss 10.5.32.202
rwcommunity MyL33tP4ss 127.0.0.1
syslocation "FR"
syscontact root
From there i can "poll" my system. But what should i do if i want my Linux system sending traps when disks are full or system overloaded etc...I have found information on Internet but not easily understandable It is for v3:
rwuser admin
createUser admin MD5 mypasword
#
# From there i would have to comment the lines regarding the communities
#
[code]....
10.5.32.202 is my management host ... is this config ok ? But it seems that trap2sink is for v2 ? How does it work ?
View 4 Replies
View Related
Mar 4, 2011
I'm trying to get SNMP setup so I can send custom snmp trap messages. I followed this "How to" [URL] and I think I have it setup and working. This is my fist time messing around with SNMP, and I don't know where to check to see if I received the trap message. Do the snmp trap message even get logged any where?
View 1 Replies
View Related
Aug 20, 2009
I am trying to monitor a Centos 5.3 box using SNMP and I am having a lot of trouble getting the data that i need from it. Everytime I try to get information from the UCD-SNMP MIB it returns "End of MIB". It is my understanding that UCD-SNMP is a standard package when Net-SNMP is installed and should always be there. Then why can't I access it? I have tried removing the reinstalling Net-SNMP, but that hasn't worked. My server is update date on all it's patches as well. It is quite old hardware, but I don't believe that should affect SNMP from being gathered. Iptables is down, and I cant' even get it from the local machine.
View 1 Replies
View Related
