Fedora :: Can't Open The Filesystem To Explore Files And View?
Jan 14, 2010
I have a crippled file system after a disk failure and attempt at repairing. Currently the Web Server is running, however I cannot open the filesystem to explore files and view. I am going to do a fresh install this weekend and upgrade system. I have two questions I hope this forum will help with. (Installing new disk and entire server)
1). Can someone tell me how I could copy the http.config file so that I can view my settings from terminal (This took me forever to get right for my environment to get shtml and cgi files to run correctly and I don't wish to lose). I am running Fedora 8, I'm also not sure of the location. (I'm fairly new to linux and not great with the terminal, however that is the only access working.) It would be great if someone added the terminal commands. If I can copy them I could email to my email address.
2). In the past when I have copied web files (web sites) over to the www directory the permission would be incorrect. Is it possible to write some of the web sites to CD (Disk burner is working) and then copy to the new system with permissions correct? Would you give a little how to all web sites are in the www directy. I think that is etc/www/"webdomain name" One thing I might add is all drives will fail it is just when...
View 3 Replies
ADVERTISEMENT
Apr 24, 2011
I was looking for a plugin to open pdf files in a new tab, acroread does but doesent remember the last view of the last file opened. So, is there a way to open pdf files through evince or okular within FF?
View 1 Replies
View Related
Apr 1, 2011
in my office we are using redhat server and 20 windows client machine. some times while viewing the server stored files or not able to view.yesterday i saw a problem all the files are showing but not able to open a single fine after restarting the computer iam able to open the file.
View 2 Replies
View Related
Jan 31, 2011
I have installed ubuntu to my pc. i made 3 partitions. one for system, one for data and one for swap. two of them were ext4. after some time i have reinstalled ubuntu again. but this time i didn't put to format the second partition, but just mount it using ext4. after that i cannot open my files. checked with gparted shows that 2GB used, but with df 188MB. and in properties writes ext3/ext4 filesystem. i used chown, chgrp but didn't help. please help, these data are ver important. i cannot lose them.
View 7 Replies
View Related
Feb 21, 2011
I have connected remote linux server through tight vnc. But i am not able to see how to open new terminal and view the terminal.I have minimize the terminal in linux window and after that i am not seeing any command line and not even seeing desktop
View 2 Replies
View Related
Nov 25, 2010
I have installed the Flash 10 plug-ins for Mozilla (Firefox) as well as several others including some add ons, etc. I have several different video players including VLC, MPlayer, Gnash SWF Player and more but I still can not view any streaming video if it is in SWF 9 format.
View 9 Replies
View Related
Mar 18, 2011
I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted.
I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?
View 2 Replies
View Related
Dec 2, 2010
I'm trying to view my files in my windows XP partition and I tried the following with no success:
1. updated /etc/fstab to include the following line:
/dev/sda1 /mnt/win ntfs-3g defaults 0 0
2. tried this command to mount sda1:
mount -t ntfs-3g /dev/sda1 /mnt/win (got an error message saying no such file or directory)
Here's what Fdisk shows:
Device Boot Start End Blocks Id System
/dev/sda1 * 581 8924 67023180 7 HPFS/NTFS
/dev/sda2 1 580 4658818+ b W95 FAT32
/dev/sda3 8925 8988 512000 83 Linux
/dev/sda4 8988 19458 84096000 5 Extended
/dev/sda5 8988 19458 84094976 8e Linux LVM
Since I'm pretty green at Linux, this is all I know how to do (for now). Isn't there a way for Fedora to auto mount these devices when it boots up?
View 2 Replies
View Related
Aug 4, 2011
I would like to open pdf files in a web browser window. I have installed mozplugger and xpdf, but it does not work , I have only blank, white screen. I installed Adobe PDF viewer, and it worked good, but I don't want to use bloated PDF viewer.
View 2 Replies
View Related
May 18, 2011
I am very new to linux, and I have a question regarding the filesystem check (fsck). The power recently went out and when I tried to restart linux the following error appears:
*/dev/sda1 contains file system w/errors, check forced it then goes on to say..
*An error occured during the file system check. Dropping you to a shell; the system will reboot when you leave the shell. Give root password for maintenance (or type Control-D to continue) I wasn't sure what to do, but checked some other online forums and they suggested running fsck manually - so I typed in the root password - and used the command, "fsck -A -V ; echo == $? ==" it then gave the following message
*WARNING!!! Running e2fsck on a mounted filesystem may cause SEVERE filesystem damage
*Would you like to continue (y/n)
Again, I wasn't sure what to do so i just checked no. I then manually turned off the computer and was prompted at the beginning to press Alt-3. I was brought to another screen and it informed me one of the drives was degraded and suggested rebuilding the array. I tried doing this, but it still brings me back to the original error of, "/dev/sda1 contains file system w/errors, check forced," and the process continues.
Also, when I tried to rebuild the array, I didn't backup any of the data on our home directory before doing this (which was probably a big mistake). After being prompted to type the root password, I was able to give the ls command and look at all the directories...the home directory where our data was stored was empty and I am afraid I may have lost some information. Is there a possibility that data was lost when I was trying to rebuild using the old drives?
View 2 Replies
View Related
Sep 7, 2009
I need to view Tiff files with Mozilla browser, does anybody know how and where I can get plug-in for Mozilla? I am running F10 with my laptop
View 2 Replies
View Related
Dec 22, 2010
I am facing a strange problem in my server, One of my filesystem shows as 3.1G when I execute df -h command and the utilization shows as 83%, but when I cd to the directory /usr/local I could not find any huge files in that filesystem and I have searched for hidden files as well,
groupserver:~ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda9 3.1G 2.5G 532M 83% /usr/local
groupserver:/usr/local # du -sh *
0 bin
93M abinav
[Code]...
View 2 Replies
View Related
Apr 17, 2010
I have installed Fedora 12 x86_64 and vsftpd. I would like to set up an user for FTP so that he/she could only view/edit files in one certain folder (the one that I set up). How would I go about doing that?
View 2 Replies
View Related
Nov 1, 2010
I have used to knoppix to grab an image off a pc to my external hard drive.I then used the command dd if=/sdc1/backup.iso of sda2 bs=4096 conv=notrunc,noerror to another pc I was cloning.This process failed and the hard drive was not seen after that even using fstab.Is there any way I can verify if the iso image i grabbed is good.What command can i use to explore this iso image?
View 3 Replies
View Related
Jul 12, 2010
Im looking for console tool that will output most detailed information about sound file (particularly mp3). Tried to use different tools (id3, lame, ffmpeg)
View 4 Replies
View Related
Nov 17, 2010
I open nautilus and almost always immediately press F3 to enable split-view. How to enable this view by default?
View 9 Replies
View Related
Aug 17, 2010
Reading local pdf files with okular.
However, when I visited this site [IMG=http://img185.imageshack.us/img185/4708/snapshot1u.png][/IMG](consisting of a pdf file), I am unable to view the site.
Only, upon installing acroread, the site/file is then visible.
Note that BEFORE installing acroread, the site can be viewed with konqueror. [IMG=http://img718.imageshack.us/img718/1353/snapshot2hh.png][/IMG]
How can Firefox be configured to view the site without installing acroread?
View 4 Replies
View Related
May 3, 2010
Since loading Lucid I keep getting pestered with a request to provide a password as the screen is blank.When installing Lucid and applying the Ubuntu-Restricted-Extras the screen went blank during the process and again there was the need to provide a password.Is there some way that I can avoid this continuous need to keep providing this information? It tends to be a pain in the backside.
View 6 Replies
View Related
Nov 17, 2009
Ah, the most dreaded SVN error of them all. It's not even showing up in my Apache logs, either, just on trying to commit.
When I try to add a file to the repository via the following command, I get the error:
Code:
add -N F:eetlemed-1.7workspace
ootClientsrccomeetlemedwebappdataContactInfo.as
A F:/beetlemed-1.7/workspace/rootClient/src/com/beetlemed/webapp/data/ContactInfo.as
commit -m "no more broken commits?" (24 paths specified)
code....
It seems that this error only shows up when I try to add a file to the repo, not when I try to update. I've already run chmod +rwx -R repository, so it should have all of the permissions it could possibly need. The only thing I don't know about is adding it to a group. I don't think my server has an apache group, so I wouldn't know where to start and what to do with that.
This problem happens from time to time, but I can't seem to shake it this time. I'm running SVN over HTTPS on Apache 2.x.
View 1 Replies
View Related
Jan 3, 2011
after googling around there doesnt seem to be a fix for this its madness
you go to open/save a file, the box comes up - and i'f im looking for a picture theres no thumbnail view?
i have hundreds of pictures in some folders and theres no way to tell which is which i have to click each one for the preview
is there nothing for this in the software center?
View 1 Replies
View Related
Dec 17, 2010
When I go Places -> MountedDrive Rhythmbox opens and tries to load the whole thing...how do I make it open in Nautilus again?
View 2 Replies
View Related
Jun 11, 2011
I have Ubuntu 10.04
I made a svn server, if I'm going to address: localhost/svn, and when it strikes an error code...
I took all the information at hand to mark the:
https://help.ubuntu.com/8.04/serverg...ubversion.html
View 5 Replies
View Related
Oct 18, 2010
When I open a terminal and start the 'top' command to view the running processes, in the summary view I get 4 users. I guess that in addition to my account the root runs in the background but who are the other 2??
View 1 Replies
View Related
Apr 7, 2010
system occurs "Too many files open exception" when application server run serval hours. I use "ls -l /proc/pid/fd" command view all fd in this java process.I found that the number of pipe is increase slowly and constantly.
Who can tell me What mean of follow line:
View 3 Replies
View Related
Mar 8, 2011
Whenever I want (for example) save a file from the internet with Firefox, I can't because Firefox does not open the "save as" window of Dolphin. Also, when I want to save my bookmarks in Firefox, I can't because Firefox can not open the "save as..." window.
There is no failure message, no crash, just nothing. Like as the request is simply ignored. Any Ideas what might be wrong in my system? The system is OpenSuse 11.3 64 Bit with KDE 4.6 and all current updates.
View 6 Replies
View Related
Nov 17, 2009
I'm trying to config Apache and Subversion to work together, I did:
1. yum install mod_dav_svn subversion then I had Subversion and httpd installed!
2. create: /usr/local/subversion/repos
create: /usr/local/subversion/repos/test (by svnadmin create)
create: /usr/local/subversion/access/svnauth.conf (by htpasswd)
added to file : /etc/httpd/conf.d/subversion.conf:
<Location /repos>
DAV svn
SVNListParentPath on
[Code]...
View 1 Replies
View Related
Jan 9, 2010
they keep coming up with Error: To many open files but none of the files in them are open?
View 4 Replies
View Related
May 24, 2011
We are setting up virtual Ubuntu 10 machines that will just be used to launch a portal to our servers. I have the stripped down image created, but would like it to launch the VMware View Open Client software so it took users directly to what we want them to see.Is there a way with Ubuntu to set that to auto deploy on start up? If I could do that it would greatly improve security on keeping users from getting to places we don't want them into
View 2 Replies
View Related
Jan 27, 2010
How to configure SELinux to open PDF files only by Adobe Reader and other programs can't do that?
View 3 Replies
View Related
Apr 16, 2010
I am running a java socket application where it reads the data and write to text file and a database at the same time. After some time I get this error? I am totally lost I dont know where is my error?
Attached is my code.
Code:
import java.io.*;
import java.net.*;
import java.util.*;
import java.util.Date;
import java.text.*;
[Code]...
View 14 Replies
View Related
