General :: Ext3/ext4 Filesystem - Cannot Open My Files
Jan 31, 2011
I have installed ubuntu to my pc. i made 3 partitions. one for system, one for data and one for swap. two of them were ext4. after some time i have reinstalled ubuntu again. but this time i didn't put to format the second partition, but just mount it using ext4. after that i cannot open my files. checked with gparted shows that 2GB used, but with df 188MB. and in properties writes ext3/ext4 filesystem. i used chown, chgrp but didn't help. please help, these data are ver important. i cannot lose them.
View 7 Replies
ADVERTISEMENT
Apr 30, 2010
I run an upgrade and an update on a lucid lynx beta 2. --- got no problems. but about the filesystems i have some questions because it seems for me that at every system boot the system will run an fsck. somtimes it's shown up, somtimes not. but in /var/log/messages and in syslog
I have always following messages ( occured in beta 2 too ).
But first before i continue - here my disk layout:
And here my filesystem types:
This is my problem because those values are seems to be static ! ( note: this partiton is mounted but not in use ) and last not least: the drive is an external usb scsi disk. but on the other side lucid lynx is running fine on my box.
View 3 Replies
View Related
Apr 30, 2010
I'm wondering if anyone knows what will be Squeeze's default filesystem. Will it be the proven ext3 or the newer (sometimes faster, sometimes slower) ext4?
I currently have ext4 and I have nothing to complain about. In fact, my overall experience has been very positive. Ext4 is definitely faster when fsck runs during boot.
What would be the cons of having ext4 as default in Squeeze?
View 3 Replies
View Related
Jun 11, 2009
Is that possible, I mean when I upgrade F10 to F11 with yum upgrade is there a way to 'upgrade' the filesystem to ext4 for example (with the exception of boot partition)? Or I have to reinstall fedora like new?
While changing the filesystem can I do it by parts? what I mean is for example: I have 2 partitions like '/' and '/home' with ext3, so I backup data in '/home', change '/' to ext4 then mv files from '/home' to '/' and change '/home' to ext4 and finally mv those files from '/' to '/home'. Is that possible?
View 2 Replies
View Related
Feb 9, 2010
I have been having problems with filesystem corruption on my eeepc 1000H for a long time now. I have tried using different filesystems, kernels and distributions (arch, slackware) to no effect. I am starting to grow suspicious that this problem lies somewhere else, as I haven't seen anyone else having similar problems in such a variety of scenarios.
I have tried testing my ram using memtest86+, didn't come up with anything after a full run through. I also have tried using e2fsck -c to check for bad blocks, it finds none. I had a go at using smartctl but wasn't really sure what I was doing. I did a long test and it came up with nothing anyway.
This problem is in addition to the problems I've been having with my intel graphics chip and KMS. A lot of the time there are lockups when booting into X, which can only be gotten out of by a hard reset. This is sometimes what causes the original filesystem errors. I've stopped messing around with KMS for now to eliminate this but my current system in unbootable. I'm guessing my disk is wrecked but have as yet seen no definitive proof. Can anyone recommend anything that I should do?
I am currently on ext4 with a custom kernel 2.6.33-rc6 (the stock kernel shipping with slackware does not have the elantech extension for psmouse included). When I was using arch, I was just using the stock kernels.
View 9 Replies
View Related
Feb 4, 2010
OS: Debian unstable 32bit, kernel 2.6.32-2, grub 1.98 from late january 2010 (only have working net-access from work now, so I am grabbing information from memory). EXT3 and EXT4 support is compiled into the kernel along with chipset/scsi/sata support (not as modules), and I have tested to boot ext3 with it before proceeding. Prereq: my old disk started to have too much S.M.A.R.T errors, so I bought another one, put in a USB cabinet, added swap and ext4 partition/filesystem to it, and copied over all data from the old system to the new that was mounted at /dest using the command "find ./ -xdev -print0 | cpio -paV0 /dest". Swiched disks, so I now have the ext4 disk sitting at /dev/sda (partitions: sda1 => ext4, sda2 => swap), and booted into rescue-mode from cdrom, using /dev/sda1 as root with a shell on. After doing this, I performed the following commands:
mount --bind /dev /dest/dev
chroot /dest
modified the /etc/default/grub to instruct the kernel to boot using ext4, ran grub-install --recheck /dev/sda
ran update-grub to modify /boot/grub/grub.cfg (which looks as it should) After doing this, grub finds my partition and mounts it. It however stalls with the message: "warning: unable to open an initial console" and does nothing after this point. I have no ramdisk, but my old kernel booted fine from ext3 (and still does if I copy it to a ext3 partition), and since the ext4 support is compiled into the kernel - should I really need a ramdisk?
View 4 Replies
View Related
May 28, 2010
I just found a tool for undelete files from ext3/ext4: extundelete: An ext3 and ext4 file undeletion utility For me it worked, but I needed to undelete only a config file from an ext4 partition
View 1 Replies
View Related
May 19, 2010
I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
View 4 Replies
View Related
Mar 9, 2010
how to convert ext3 to ext4? I'd like to convert partitions which I use for virtual machines (vmware-server and virtualbox). I use Ubuntu 9.10 as vmware-server host and Gentoo as virtualbox host.
View 5 Replies
View Related
Dec 29, 2009
How can I format a USB hard drive to ext3/ext4 or whatever file format and have full permission to read, write and execute all files afterwards? When using the command line (as ROOT of course) mkfs.ext3 /dev/sdb? Restricts the rights to ROOT as does the procedure gParted. The man mkfs did not help much. Configuring the fstab- file is a bit of a hassle, so it would be nice, if there was an option to set the permissions "correctly" right from the beginning. Setting Ubuntu (I'm using Ubuntu 9.10) up, so that it mounts USB devices not as ROOT as default but giving all users all permissions seems to be really complicated, as a guy from my local LUG told me.
View 10 Replies
View Related
Jul 7, 2011
I was in the process of installing Ubuntu 11.10, but got stuck choosing which file system to use. ext3 and ext4; which is better for a personal desktop? If ext4 is better, will it work well on my old PC (bought 3 years ago), or perhaps ext4 is not actually compatible with an old hard disk?
View 4 Replies
View Related
Aug 30, 2011
is there a way of sharing an ext3/ext4 formatted partition on an external USB drive between different users (uids) on different Linux machines without creating a group for this purpose, setting the group ownership of the partition to this group and adding each respective user to the group on every machine?This would mean that I need to have root privileges on every machine... which I may not have in some cases.I'm using the partition to store the code I'm developing on Linux and I would like the option to be safe... if possible.I could use a vfat partition but then I have no control of the rw rights + I cannot develop directly in the dir: I would always have to tar.gz the directory, extract, work, tar.gz, copy to the external drive.
View 2 Replies
View Related
Jun 12, 2011
I have just purchased a 2TB drive for my server and I was trying to get an idea of the differences between these file systems or other file systems out there. What is the amount of space after formatting for ext4, ext3, and ntfs?
View 4 Replies
View Related
Sep 7, 2009
How well is the ext4 new file system mounting compatibility with the older ext3 previous Linux installations ? I refer to Ubuntu 9.04 and the new Fedora 11 which have the option to install with the ext4 file format. Will it be better if I install with the older ext3, so that I will be able to mount all other Linux from each other in a multi-boot system ?
View 6 Replies
View Related
Mar 18, 2011
I've ran fsck -c on the (unmounted) partition in question a while ago. The process was unattended and results were not stored anywhere (except badblock inode). Now I'd like to get badblock information to know if there are any problems with the harddrive. Unfortunately, partition is used in the production system and can't be unmounted.
I see two ways to get what I want: Run badblocks in read-only mode. This will probably take a lot of time and cause unnecessary bruden on the system. Somehow extract information about badblocks from the filesystem iteself. How can I view known badblocks registered in mounted filesystem?
View 2 Replies
View Related
Mar 18, 2011
Is there a way that I can use my Linux ext4 file system, as such and then use it on some other computer.I have a dual-boot of Windows 7 and Ubuntu 10.04 and my partition table looks like this:My question might not be clear, so explaining it with an example.Can I copy my Linux partition on a flash drive and then use it on a different PC, with or without any need to install Ubuntu on new PC, by simply booting from the copied ext4 partition.This way, I can easily port my Ubuntu packages and other applications, settings etc. from one PC to other
View 1 Replies
View Related
Apr 19, 2010
I am trying to figure out a totally odd behavior of the ext3 filesystem mounted in Ubuntu 9.10. There is a Korn Shell script, part of which does the following in the loop:
while ((1)); do
mv dir1/file dir2;
if [[ ! -r dir2/file ]]; then
echo "ERROR"
ls -l dir1/* dir2/*
exit 1
elif
echo "OK"
fi
done
Given that dir2/file always exists and that I do not move it asynchronously with "&", my script should never hit the "ERROR" statement. The odd thing is that it does, and quite randomly (no pattern at all). However when it does hit the ERROR case, ls -l prints that file is in dir2 and it is readable! I tried using "-e" instead of "-r" test - no luck. I never seen anything like this in 10 years of my programming experience. Same script worked fine on Fedora 11, and yet it wouldn't work on Ubuntu.
View 5 Replies
View Related
Aug 5, 2011
On my drive I had 2 partitions for an Ubuntu 9.04 (swap, /) and one partition for Windows. I figured out that I should upgrade my Ubuntu, so I deleted the "/" partition and in its place created 2 new partitions (/, /home) .
After installing the latest Ubuntu 11.04, I realised that although I had backuped everything I needed in a 2nd disk and I could access those folders and their data from my Ubuntu 9.04, both my Windows and the 11.04 can locate neither the folders nor the data now. I have no idea why this happened (perhaps some issue with the mounting?) I have tried the trial version of Stellar Phoenix linux data recovery tool, but it cannot locate the old partitions.
View 2 Replies
View Related
Jul 11, 2010
I've just bought a new SSD hard drive:Kingston SSDNow V-Series SNV125-S2/128GB 2.5'' 128GB SATA/300The question is which filesystem whould you recommand and why?BTRFS vs NILFS2 or EXT4?If you choose ext4 would you enable jurnalling?I'm very close to choose Btrfs.Any experience with running any of these on your SSD?
View 7 Replies
View Related
May 29, 2010
fscheck is quite annoying, since it usually occurs when I reboot my system performing administration tasks. do I actually need fscheck if Im using the ext3 file system? if not how would I extend the period between checks or just turn it off altogether?
View 9 Replies
View Related
Jan 14, 2010
I have a crippled file system after a disk failure and attempt at repairing. Currently the Web Server is running, however I cannot open the filesystem to explore files and view. I am going to do a fresh install this weekend and upgrade system. I have two questions I hope this forum will help with. (Installing new disk and entire server)
1). Can someone tell me how I could copy the http.config file so that I can view my settings from terminal (This took me forever to get right for my environment to get shtml and cgi files to run correctly and I don't wish to lose). I am running Fedora 8, I'm also not sure of the location. (I'm fairly new to linux and not great with the terminal, however that is the only access working.) It would be great if someone added the terminal commands. If I can copy them I could email to my email address.
2). In the past when I have copied web files (web sites) over to the www directory the permission would be incorrect. Is it possible to write some of the web sites to CD (Disk burner is working) and then copy to the new system with permissions correct? Would you give a little how to all web sites are in the www directy. I think that is etc/www/"webdomain name" One thing I might add is all drives will fail it is just when...
View 3 Replies
View Related
Jan 10, 2010
I have an external 3.5" USB 250Gb HDD which is showing symptoms of hardware problems (repeated /var/log/messages errors of "reset high speed USB device using ehci_hcd"). This was originally plugged in to my NSLU2 running Debian Etch. I have just installed Ubuntu Desktop 9.10 to a spare Pentium-3M laptop and was hoping to copy the contents of this HDD to a fresh drive. However, I cannot mount it even read-only; mount -o ro /dev/sde3 /mnt/disk fails, and the /var/log/messages error is "recovery required on readonly filesystem", "write access unavailable, cannot proceed". I cannot understand why mounting a disk read-only should require write access. Following advice I googled elsewhere, I tried running mke2fs -n /dev/sde3 to try to list the alternative superblocks - but once again I got the error that the device was read-only. How can I go about accessing the data on this disk?
View 11 Replies
View Related
Jan 16, 2010
Is there guide for converting ext3 to ext4 on Fedora? I use Fedora 12 which is regularly updated. How safe is procedure for data, I have only one ext3 partition on disk which has one ntfs and that ext3 partition (and also one small swap partition).
View 5 Replies
View Related
May 25, 2010
I'm currently using Ubuntu, but just ordered a new SSD (64GB) & plan to install Fedora on it- but just have a few questions...
- What is Fedora's position on MONO & MoonLight?
- I will be leaving /home on my 600+ BGB HDD, but root, /usr & swap will be on my SSD- will there be any potential issues?
- What format should I use (Ext3, Ext4, XFS...) for my SSD?
- Any recommendation of rpm repo's I should add?
- Will FGLRX work with FC13 or FC12
View 6 Replies
View Related
Nov 15, 2010
i installed ubuntu 10.04 and accidentally choosen ext3 over my home partition ext4...and now it erased(?) all the files in my home folder...
is there a way to return the ext4 files??
View 4 Replies
View Related
May 17, 2010
I had Lenny with ext3 installed on my notebook. I've done the Upgrade from Lenny to Squeeze. Howto and should I convert ext3 to ext4?
View 5 Replies
View Related
Dec 10, 2010
I have a 6 disk machine, i am using FC12, i created a software raid 5 device /dev/md1
i formatted it
Code:
mkfs.ext4 /dev/md1
and mounted with options as so:
[Code]...
View 1 Replies
View Related
Oct 5, 2010
I'm using CentOs 5.4 (2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64). I tested out ext4 on a partition for the last few months and it seems to work fine. The issue is that quotas dont seem to work correctly on it. Is there a way to revert back to ext3? Mainly the quota tools do not work on it.
View 1 Replies
View Related
Feb 26, 2011
I've heard that ext4 has better performance, but that it will also eat my hard drive. Has this problem been fixed? What would be a safer bet on a squeeze box? Is there even anything to worry about?
View 9 Replies
View Related
May 21, 2010
I've Squeeze installed on ext3 (Upgrade from Lenny). Howto convert ext3 to ext4?
BTW What are advantages & disadvantages of ext4?
View 4 Replies
View Related
