Fedora :: Building The Jacktrip On 11 - Error: Snd_strerror Was Not Declared In This Scope
Nov 10, 2009
I have install the dependiencies, by running the command sudo yum install qt4-devel jack-audio-connection-kit-devel successfully done (using fedora 11) After trying to build as [ajitj@fedora11 src]$ ./build But getting the error as bellow: (I have put some part of the lines)
../externals/includes/rtaudio-4.0.6/RtAudio.cpp:6164: error: �state� was not declared in this scope
../externals/includes/rtaudio-4.0.6/RtAudio.cpp:6164: error: �SND_PCM_STATE_XRUN� was not declared in this scope
../externals/includes/rtaudio-4.0.6/RtAudio.cpp:6166: error: �snd_pcm_prepare� was not declared in this scope
I'm trying to compile a package of OpenKiosk call NodeView on Ubuntu 10.04, I finally manage to run the 1rs. step of 3 with no problem at all, that I have to do to install this program:
Quote:
1rt - ./configure --prefix=/usr 2nd - make 3rd - sudo make install
Now when I try to run make I get this error:
Code: $ make cd xmlrpc++0.7 && make -f Makefile make[1]: Entering directory `/home/user/Desktop/nodeview-2.0.3/xmlrpc++0.7' g++ -c -pipe -g -Wall -W -O2 -I/usr/share/qt3/mkspecs/default -I. -o .obj/XmlRpcSocket.o src/XmlRpcSocket.cpp code....
Code: #include<iostream.h> #include<stdio.h> main() { int num1, num2, sum; code....
I search the answer to my problem in various forums but I can't solve the problem.I think that is due to I need some package or that I don't install the necessary libraries.
different python module for playing audio similar problem. This time pyAudiere (sorry for sounding a little bored by this, but I had not much success of late) Ok, I am trying to install Audiere which doesnt work. I download the dependencies (libaudiere), then I extract the tarball download from their website. then I followed a procedure from this website because that was the only one I could find (documentation is a little sparse in that compartment unfortunately) from the terminal I write
I'm learning how to program kernel drivers, and I'm making a hello world module for that. But I can't find the cause of some errors... My module as three files:
Code: setproctitle.c: In function 'compat_init_setproctitle': setproctitle.c:100: warning: implicit declaration of function 'strlen' setproctitle.c:100: warning: incompatible implicit declaration of built-in function 'strlen' setproctitle.c:104: warning: incompatible implicit declaration of built-in function 'strlen' setproctitle.c:108: error: 'argv_start' undeclared (first use in this function) code....
I am using Centos 5 with an old kernel. I want to build the latest version for atheros 5K wireless drivers. So i downloaded, and compiled with the ".config" which is already in /boot , and made it ready to run.
However, whenever i try to boot with new kernel, after choosing it from the grub menu, i got the following error. I tried many many .config files but the result was the same.
Here is the screen capture of the error;
I'm trying this process for a week without any success...
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I'm trying to port binutils to a new architecture. I have changed and created necessary files for this. The configure commad run succusfuly. but when I tried to run make I find probems. the error msg is:
I am currently working on Debian based Operating System, and my objective is to make a live CD.
I ve followed the specified steps to buid a live CD, and finally I ve made an .iso file too.
Now,I am facing some issues to execute that .iso on Qemu(Virtual Interface),those are:
1. While builing it into an .iso,I skipped the md5sum step, is that mandatory to be built for making a live CD?
And when I am trying to make an MD5SUM using the following command, Its giving me the following error:
Kindly specify me, where exeactly the error in the command for creating the md5sum?
2. While executing the .iso file in Qemu using the following command :
And the I am able to watch the Operating System booting initialization and then when I select the option as "Install as Live CD" Its giving me the following error:
I request who ever reads this thread, please send me some kind of a response.I'll be thankful to them.
I tried to build linux-2.6.36 but I got this error message
Code:
I looked into gcc-version.sh but the problem is located somewhere else I thought at first one of the files might have been corrupted and I downloaded the archive again.
I must also say that this happened in different versions of slackware (the distro I use): 12.0, 12.1, 12.2, 13.0, 13.1
I recently wanted to build Empathy 2.31 from a source tarball (after having installed all the dependencies listed on the Empathy website).I got the following error while launching ./autogen.sh:
Code:configure: error: glib-compile-schemas not found.After some googling to try to fix this problem, I've found a thread on these forums. It was saying install libglib2.0-dev an then install (or remove) gnome-shell.I tried every solution I've found but nothing works, still got the error.Does anyone here succeded in compiling Empathy from source please?
I'm building a 3-node cluster. I have created ocfs filesystems and mounted them on the first two nodes. But while mounting them on the third node , i'm getting this error for 8 of the total luns. all these 8 luns are of 1GB size.
I've unmounted these 8 luns from the other node and tried to mount in the third node ... and then it was working and again the error occurs in the second node. My observation was for some reason these particular luns are not allowing the third node.
mount.ocfs2: Invalid argument while mounting /dev/mapper/voting1 on /voting1. Check 'dmesg' for more information on this error.
I'm running Ubuntu 8.04. I've got sqlite3 installed, but I keep getting errors when trying trying to install pysqlite (2.4.1 or 2.5.1).
If I run $ python setup.py build things look like they're going ok for a while, but then I soon start getting errors:
There's a whole load more stuff, ending up with:
gcc -v tells me that gcc exists so I think that last error must be a red herring.
However, after searching the web and trying lots of things, I've not managed to build pysqlite.
In case it's relevant, setup.cfg contains the following (after attempts at various things having tried following up on some suggestions I found posted elsewhere):
I have an FC13 x86_64 server and having trouble building RPMs, but I don't think it's specifically an RPM problem. I think it's a tty management or other type of problem.
When spec files have a "%files -f filelist.txt", which contains the list of files for the RPM, it calls the /usr/lib/check-files script, which sorts the files that are supposed to be in the RPM and compares them with the files that are in the built RPM before they are packaged.
The trouble is that the sort fails.
Here's the trace from the check-files script:
The above doesn't show that the output from sort is redirected into those /tmp files. The first sort succeeds because it reads data sent by the "find" in the same shell. The second sort fails because (I think) it cannot read data from stdin for some reason.
What could possibly cause this? I've checked various permissions, libraries, even used strace extensively, all of which is inconclusive.
This is one of my test server boxes, so this problem is something that I've caused, but I have no idea what.
libc controls input and output, correct? Could it somehow be a glibc problem, or a devpts problem? I can run a simple command and pipe it to sort with no problem. It appears to only be related to sub-shells.
I also replaced sort with cat and just tried to redirect stdin in that file to a temporary file, and that also fails.
I've tried running it with selinux disabled and that has no effect.
I've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.
New installation of Suse 11.3. Trying to build Cinelerra-CV from [url]
Quote:
The source code of Cinelerra-CV is available from a git repository. To get a copy for compilation use the following command
You can modify this working copy, and submit your patches to the mailing list, or ask for your own repo or for permission to push to one of the existing ones.
From the README.BUILD file, you are told to build autoreconf -i.
This gives an error:
Code:
Running autoreconf with the "force" option works:
Code:
After running ./configure, and then make, there are errors:
Trying to get Midori browser from SBOpkg's and one of the dependencies is libsoup.configure: error: GLIB 2.21.3 or later is required to build libsoup.Anyone able to give me a pointer in the right direction to overcome this.