Fedora :: Access An NTFS Disk?
Dec 21, 2009How can I access an NTFS formatted disk to read the raw data?I have done this with the FAT file system. I followed the FATspecifications,d I can read the contents of each disk sector.
View 11 Replies
ADVERTISEMENT
Hardware :: Access Data On NTFS Disk (RAID 5)
Mar 14, 2010I am trying to access data that is on a Raid 5 array in Ubuntu... There are 4 installed disks (250gig disks) - 3 of which are setup as a Raid 5 array (the 4th is active but unused). These show up as one large drive (498gig). I have had an issue with the drive where it is no longer allowing Windows to boot - I receive a disk read error on boot (so the OS does not load, obviously!) - what happened was basically I unplugged then replugged in one of the disks which affected the array... I physically reconnected everything as it was, I then had to 'reactivate' the disk in the Raid BIOS... at that point the array seemed OK, was the right size, etc (and was listed as "Optimal" in the Raid BIOS) however, the problem with the disk read error persists.
I have started the machine using Ubuntu v9.10 from a CD (non-destructive mode) and it shows a disk of the right size (ie: on the desktop and in Nautilus it says "498gig Filesystem" ). However, in Nautilus, the disk appears empty with no folders or files on it (even with hidden files shown).... If I view 'Information" for the disk it shows 67gig used space and 399gig free space (which is correct). Also, if I view the disk in Gparted, it shows a disk with about 67gig of used space and 399 free space on a 464gig disk (with 8gig unallocated). One more thing.... when I try the command 'sudo dmraid -tay' it says that there is no raid disk (there are in fact, no drives plugged into IDE or SATA slots - all disk are plugged into the RAID controller card). Anyway, at this stage, I just want to copy the data to a single hard disk if possible and move on.
Fedora Installation :: No Ntfs Disk Drive Icons?
Jan 25, 2009now i have the kde session, now but the ntfs disk drive icons are gone
View 1 Replies View RelatedRed Hat / Fedora :: How To Access NTFS Partition?
Feb 10, 2010I use both Windows and Fedora(using dual boot).So is it possible to access my windows ntfs partions in Fedora ?
View 4 Replies View RelatedRed Hat / Fedora :: Automount LUKS Encrypted NTFS USB Disk In RHEL 5.3
Dec 23, 2009I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
Fedora Installation :: Mount NTFS Partition From 10 Rescue Mode/Disk?
Mar 9, 2009Background for the problem:
A. I have partitioned my WinXP LTop into:
--- WinXP NTFS partition
--- a vfat partition (mounted onto /fat32)
--- Installed F10 on ext3 virtual partition
B. I do not want install grub-loader in the Master Boot Record (that would loose my WinXP boot-loader for ever)
C. I have installed grub boot loader in the First Boot Sector
D. Now I have to boot using Rescue Mode, do:
1. dd if=/dev/sda2 of=/fat32/linux.bin bs=512 count=1
2. mount -t ntfs /dev/sda1 /ntfs
3. cp /fat32/linux.bin /ntfs
4. modify /ntfs/c/boot.ini and introduce the statement 'c:linux.bin="Linux"'
Problem: Im not able to do step D.2 above.
Symptom:
** after booting linux using the Rescue Mode: sh-3.2# chroot /mnt/sysimage sh-3.2# uname -r 2.6.27.5-117.fc10.i586 sh-3.2# mount -f ntfs /dev/sda1 /ntfs FATAL: Could not load /lib/modules/2.6.27.5-117.fc10.i586/modules.dep: No such file or directory ntfs-3g-mount: fuse device is missing, try 'modprobe fuse' as root
sh-3.2#
Observations:
* The rescue mode boots into i586 based kernel (I dont know what is the actual difference between i586 and i686 - will really appreciate if anyone can educate me about it). * The installation is only a i686 image and consequently there is *only* '/lib/modules/2.6.27.5-117.fc10.i686' dir and *no* other dir. There is no dir as xxxx.fc10.i586.
Red Hat / Fedora :: Access NTFS Partition In CentOS 64bit
Dec 16, 2009I will be great if someone helps me to know how to access NTFS partition in CentOS 64 bit. I tried with google and could mount the partition but read/werite operation is too slow.
View 2 Replies View RelatedFedora :: Access Disks And NTFS Partitions On The Host OS - Windows 7
Dec 8, 2010I installed Fedora on a VMWare, hosting OS is Windows 7
How can I access Disks and NTFS Partitions on the Host OS "Windows 7"
From Fedora?
Fedora :: Access Some Files On That Cloned Disk?
Aug 4, 2011I made a clone of my ordinary disk with Clonezilla some times ago. Now I want to access some files on that cloned disk. Since the cloned disk also has a LVM structure I don't know how to mount it. When I connect the cloned disk I can see both /dev/sdb1 & sdb2. vgdisplay -v gives me:
[Code]...
Red Hat / Fedora :: Full Disk Encryption DD - How To Access Data In DD File
Feb 12, 2010I am investigating full disk encryption and have made a DD copy of the hard drive which has been encrypted, this DD file is stored on my computer for analysis.
First question is - Anyone know how i can access data in this DD file even though its been encrypted?
Second question - Is there a DD command where i can image the systems memory? I ask this because when a system is turned on, to get past the pre-boot authentication stage you need a password. From what i understand, this password will be passed in to ram when power is applied to the system. Making a copy of the memory will also copy the password?
Slackware :: NTFS Disk In - 13 ?
May 25, 2010After a motherboard change in my pc, I would like to dualboot Slackware 13 with WinXP. In the old system, (dualboot Win2K-XP), I had "My Documents " on a separate disk, as it was used by both OS's. In the new system, I would again like to share this between the 2 operating systems. (both clean install) --> Is it possible to use the existing NTFS disk as the /home in Slackware?
For the Linux side, I am planning 4 partitions on 3 separate HD's:
SUSE :: How To Mount NTFS Disk
Aug 6, 2009I want to access suse to vista. I am trying this command but I didn't.
mount /dev/hda1 /win/c -vfat
General :: Mount NTFS USB Disk ?
Feb 19, 2011I am facing an issue in linux El4,I want to mount NTFS USB Hardisk to linux, I tried to mount but i got fs related error, after I have installed ntfs-3g, then i tried to mount through this command (mount -t ntfs-3g /dev/sdb1 /mnt/usb) but now i getting Fuse error, is there any possibilty to mount NTFS disk to linux EL4 without install Fuse.
View 3 Replies View RelatedGeneral :: Resize A NTFS Partition In A Disk?
Feb 1, 2010I need to resize a NTFS partition in a disk for which I have an image (dumped with dd).
I mounted it through the loop device on linux:
# losetup -o 32256 /dev/loop0 disk.img # I got the offset from looking at fdisk's output
# mount /tmp/t /dev/loop0
# ls /tmp/t
[content of NTFS partition shows correctly]
# umount /tmp/t
# gparted /dev/loop0
gparted shows me the disk correctly; it just contains one large NTFS partition I want to shrink.
I have it had it running for one hour now.
Question: will this work? There is lots of disk access but the timestamp and size of the underlying file disk.img remain unchanged.
Ubuntu :: How To Restore NTFS Disk Data
Sep 27, 2010I've occasionally changed HDD filesystem type in Disk Utility from NTFS to Linux Extended . It created an extended partition containing some other partitions instead of NTFS.
View 3 Replies View RelatedUbuntu :: Unable To Unmount The Ntfs Disk
Jun 27, 2011I have just bought a WD USB disk and (of course) it is formatted in NTFS and I want to reformat it to ext3. But Gparted can't unmount it, I get the info:
Unable to find mount point
Unable to read the contents of this file system!
Because of this some operations may be unavailable. The following list of software packages is required for ntfs file system support:
ntfsprogrs. But ntfsprogrs is already installed on my Ubuntu (Natty) system! How can I reformat that disk?
General :: Mount An NTFS Disk In CentOS 5.4?
May 2, 2010How can I mount an NTFS disk in CentOS 5.4? I did 'yum list | grep -i ntfs', but that doesn't show any ntfs rpms. Does CentOS support NTFS filesystems?
View 4 Replies View RelatedUbuntu :: Can't Share Mounted Ntfs Disk On Network?
Aug 29, 2010I have samba installed. I also have a Windows NTFS disk mounted on Ubuntu. To share the file, I migrate to the folder with the file manager, right click on it and select "Sharing Options". I get the message
'net usershare' returned error 255: net usershare add: cannot share path /mnt/Windisk/<path> as we are restricted to only sharing directories we own. Ask the administrator to add the line "usershare owner only = false" to the [global] section of the smb.conf to allow this.
[Code]...
Ubuntu :: Install Live CD On A NTFS Flash Disk?
Jan 18, 2011I have ubuntu running on a SD but I can't install it when NTFS formatted wich works faster. What can I do?
View 6 Replies View RelatedGeneral :: Full System Backup From Ext To NTFS Disk
Oct 11, 2010I wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
Debian :: Find + Mount.ntfs-3g Strong Disk Usage
May 10, 2011Since I installed Debain Squeeze with KDE (for more than a month), there is something I cannot explain to myself. 5-10 minutes after bootup my hard disk begins to work very intensely. Then, after 2-3 minutes it comes back to its normal operation. Using "atop" I found out that the first process that squeezez my HDD is "find". Then, a little bit later, mount.ntfs-3g appears. Both do what they do, then exit and everything's back to normal. What I suppose, is that that something is searching, first on the Linux partitions, then on the ntfs partitions.
Does anybody know what is this phenomenon related to? Or at least, how could I find out. Ah, and to avoid some basic troubleshooting questions: I have 3 GB of RAM, so no swap is needed. And I repeat: it's find and mount.ntfs-3g that use the HDD.
General :: Ubuntu - Install On Flash Disk With NTFS Filesystem?
Feb 2, 2011I would like to install linux (ubuntu) on a Flash disk with NTFS partition and boot from flash disk, is it possible? Yf yes how could i install ?
View 3 Replies View RelatedUbuntu :: Ext USB NTFS Disk Unable To Read Files Created Under 10.10
Feb 9, 2011Using Ubuntu 10.10 (installed via mythbuntu) I'm unable to read or see files/directories created under Ubuntu. I think it started happening after a reboot to Windows. Some of the directories created under Ubuntu have disappeared completely and some of them produce the following error:
/media/storage/videos/Kids Videos$ ls
ls: cannot access Justin Bieber: Input/output error
ls: cannot access Octonauts: Input/output error
rest of directory is seen fine...
Same on some files:
ls -l
ls: cannot access Dirk Gently.mp4: Input/output error
ls: cannot access Dirk Gently.nfo: Input/output error
ls: cannot access Dirk Gently.srt: Input/output error
ls: cannot access Dirk Gently.tbn: Input/output error
ls: cannot access Human Planet: Input/output error
ls: cannot access Russell Howard's Good News: Input/output error
ls: cannot access The Planets: Input/output error
ls: cannot access Lost Land of the Tiger: Input/output error
total 300160 .....
Just to make it worse I copied more data onto the disk from windows so may have lost some it completely. It there anyway I can repair this? When trying to check under Windows it says it can't. Some of the missing files can be reloaded but others can't. Ran chkdsk /f under Windows XP. Some files have reappeared, but there has been a lot of unrecoverable files lost. Conclusion: Ubuntu 10.10 is badly broken for writing to NTFS. As I would like to share between Windows & Ubuntu using the external disk, I'm not sure what to do at this stage.
Debian :: Best Way To Limit Access To NTFS
Jan 25, 2011I managed to auto-mount NTFS partitions in my server.
But I want to limit access to this partition to a select few.
What's the best way, easiest way to do this.
Ubuntu :: READ ONLY Access To NTFS ?
Jun 1, 2010I have Ubuntu 10.04 with Gnome and Windows XP on the same machine.
Using Nautilus 2.30.1 I can write into NTFS system partition from windows.
Howto setup just READ ONLY access to NTFS?
General :: Access Ntfs Partition
Mar 12, 2010I have linux9 & windows xp dual boot.I want to access ntfs partition in linux9 please give me suggestion for same.
View 4 Replies View RelatedUbuntu :: How Can I Access NTFS Partition
Jan 1, 2010I have dual-boot XP/Karmic.I have an external HDD for backup. One partition is NTFS for the XP stuff. The second partition is ext4.I was practicing with the SystemRestoreCD, which provides a Linux root console.I can create and delete directories on the ext4 partition, but not on the NTFS partition. The error message says "read-only file system".I tried to use chmod and chown to change permissions and owner.I assumed that as root, I could do anything.How can I access the NTFS partition, and do anything that I need to do?All my current XP stuff on the HDD was backed up from within XP, using standard software (Cobian Backup), and normal user privileges. But I want to practice for when my XP OS is damaged.
View 7 Replies View RelatedGeneral :: Access NTFS In System?
Jul 4, 2010How can I access NTFS in linux?
My distribution is centos 5.5.
General :: How To Access Fat And Ntfs Partition?
Jan 27, 2010how to access fat and ntfs partition in redhat linux 5
View 2 Replies View RelatedSlackware :: Allow Normal Users To Write On NTFS External Hard Disk?
Dec 4, 2010i have installed Salix 13.1 LXDE version (Salix 13.1 is compatible with Slackware 13.1). I must use various external hard disks formatted with NTFS. The hard disks are automatically recognized and mounted with PCmanFM file manager, but only user root can write on them. How can I allow normal users to write on automounted external ntfs drives?
View 3 Replies View Related