Ubuntu :: Ext USB NTFS Disk Unable To Read Files Created Under 10.10
Feb 9, 2011
Using Ubuntu 10.10 (installed via mythbuntu) I'm unable to read or see files/directories created under Ubuntu. I think it started happening after a reboot to Windows. Some of the directories created under Ubuntu have disappeared completely and some of them produce the following error:
/media/storage/videos/Kids Videos$ ls
ls: cannot access Justin Bieber: Input/output error
ls: cannot access Octonauts: Input/output error
rest of directory is seen fine...
Same on some files:
ls -l
ls: cannot access Dirk Gently.mp4: Input/output error
ls: cannot access Dirk Gently.nfo: Input/output error
ls: cannot access Dirk Gently.srt: Input/output error
ls: cannot access Dirk Gently.tbn: Input/output error
ls: cannot access Human Planet: Input/output error
ls: cannot access Russell Howard's Good News: Input/output error
ls: cannot access The Planets: Input/output error
ls: cannot access Lost Land of the Tiger: Input/output error
total 300160 .....
Just to make it worse I copied more data onto the disk from windows so may have lost some it completely. It there anyway I can repair this? When trying to check under Windows it says it can't. Some of the missing files can be reloaded but others can't. Ran chkdsk /f under Windows XP. Some files have reappeared, but there has been a lot of unrecoverable files lost. Conclusion: Ubuntu 10.10 is badly broken for writing to NTFS. As I would like to share between Windows & Ubuntu using the external disk, I'm not sure what to do at this stage.
I have a Western Digital 3TB USB drive connected to a Raspberry Pi 2 running Raspbian Jessie. I created an 30GB ext4 system partition and a NTFS Data partition using the remainder of the drive. I formatted the NTFS partition as follows:
sudo mkfs.ntfs -Q -L Data /dev/sda2
The drive works fine on the Pi but when I connect it to a Windows 7 pc the pc doesn't recognise the format of the Data partition and can't access it.
I'm dual booting windows vista and ubuntu hardy on a multi-partitioned Dell D630. I created a partition using mkfs -t ntfs. Linux has no trouble reading/writing to it, but every time I boot into windows, chkdsk tries to "fix" the partition, fails, and tells me that the partition is corrupted. Can anybody suggest a way to convince vista that the partition is indeed ok, or else another way to create the partition so that vista can recognize it?
I'm a newbie despite using Ubuntu most of the time for nearly 3 years. There are some files which are created automatically in one of my ntfs partition. The files are khq, khp, kht, an autorun inf file and others. They seem to have been created while I was using ubuntu and even though I delete them,they appear again later. I have googled and have found few information that the files are malware. I will like to know if there is a known issue and solution. This is the first time i'm posting a thread.I hope i have post it at the right place and if not,
Kernel 2.6.21.5, GNU (Slackware 12.0). Bash 3.1.17.
I want to search an entire subtree of /, in the file system, for all files, with extension html, created on the hard disk. In addition, these have to be the last five created. I think I could split the problem into two parts: (a) Forget about the last condition. Then this is a job for the find command. (b) Sort the output of find using the date as the key, then use 'head' to print the desired output. But even two such simple steps are enough to justify the writing of a shell script. And here lies my weakness.
My script writing knowledge is rudimentary. What's the final purpose? Well, I lately saved four or five LQ pages onto disk containing information I consider valuable to me. But I don't exactly remember where on the disk. Then: either the problem posed is really of a very simple nature or it is not, in the latter case a script being mandatory. One of the algorithm drawbacks (the one described above) is that find may be running a great deal of time. My machine resources (RAM and CPU speed are low) are scarce and there possible are a large number of HTML files on the disk.
I am making the transition to either Ubuntu or Kubuntu in the next couple days. I have been running the Win7 evaluation version which is pretty much just Win7 Ultimate.Two are internal, four are external. All of them are NTFS. So are my pen drives (512MB and 8GB). Will these Linus distros be able to access these drives? If so, to what degree? Everything I have read online so far seems to give Linux a mixed track record when it comes to working around NTFS security, etc.
I have just bought a WD USB disk and (of course) it is formatted in NTFS and I want to reformat it to ext3. But Gparted can't unmount it, I get the info:
Unable to find mount point Unable to read the contents of this file system!
Because of this some operations may be unavailable. The following list of software packages is required for ntfs file system support:
ntfsprogrs. But ntfsprogrs is already installed on my Ubuntu (Natty) system! How can I reformat that disk?
Just installed opensuse 11.3 Kdeversion on my laptop. Before installing it on live mode i had a problem of accessing my other drives (NTFS, FAT32 and EXT4) which said HAL system policy...etc mounting error. I could access all drives with root privilege. I thought problem will be solver once i install opensuse on my system. How ever i was really disappointed after seeing the same problem post install. Googled around for the solution and got this link
[Code]...
After this the problem got worse now i am not able to see any of the drives in the side panel. Gone through many forum and posts all discuss about external USB HDD.
When i work in Ubuntu on a dual boot system with a shared NTFS data-partition where Windows is hibernated, and then reboot and continue working in Windows from the hibernated sesion, strange things happen. Files disappear, files that i worked on suddenly have the content of another file.
Palimpsest Disk Utility was working fine able to read the SMART status of my hard drives till I rebooted my machine. After rebooting Palimpsest Disk Utility reports SMART is not available. Any way to get it to start working again?
I'm trying to delete files on a USB disk. If I try using terminal using rm, because files are write only. I can't change this, even as root using chmod or unmount mount. When I use fdisk I still can't reformat, either as superuser or root. I get the following :
Disk /dev/sdh: 16.1 GB, 16064184320 bytes 7 heads, 37 sectors/track, 121140 cylinders Units = cylinders of 259 * 512 = 132608 bytes
I am new to ubuntu! I installed ubuntu and removed all partitions, now I have only one partition with 160 GB, Wanted to install again Xp but my laptop cant boot from CD/DVD, used GParted to create another partition and created one ntfs, but I have now one problem, ubuntu is not starting and I cant boot from CD. My laptop is Sony Vaio VGN-Fz18E .
I used gparted to create 60GB free space which I then formatted as ntfs. However,when I go to install XP I get the blue screen of death.I know the XP installation disc is OK.The ntfs partition (sda3) is after the ext4 partition (sda1) - could this be the source of the problem?
i was trying to format one drive, accidentally formated another, told the format process to stop, and i'm unable to read the folders or files in the drive. i see some greek, odd symbols... But cant open the folders.
Reproducible with Firefox 3.6.6 (installed from Ubuntu 10.04 repository), on Dell D620, Ubuntu 10.04 Steps to reproduce:
1) start Firefox from command line "firefox -P"
2) create new Firefox profile on NTFS volume (mounted with NTFS-3g)
3) add NoScript extension (through extension manager Get Add-ons), restart Firefox as suggested
4) extension is not added to Firefox In case at step 2) profile is created on Linux volume, at 4) extension is added to firefox.I'm not 100% sure, but I think this bug is related to Firefox 3.6 update (no problems with Firefox 3.5). I did not make proper investigation, but I have feeling same problem applies to Thunderbird 3.1.This issue does not allow to share Firefox/Thunderbird profile on dual boot machine (Ubuntu/WindowsXP).
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
I need to know when I have bought a notebook. I know I have formatted disk myself and partition created and Ubuntu installed.Is there any way I can get info when I bought a notebook? Like time of disk formatting, partitions created, Ubuntu installed
So I currently have OSX and Windows 7 install on my hardrive - I would like to add 10.04 in the mix, however it will not let me resize my Windows partition because it does not recognize it as ntfs. It will not let me mount it via cli or gui and gparted will only offer to remove the partition - not resize.
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
Is it possible / how can I? I have two directories "money" and "assets". I have two users, "jonn" and "jean". I "need" john and jean to share a login called "post". I want John and Jean to use this "post" login to be able to write a file to folders called "money" and "assets". I don't want them to be able to "read" files in either directory. I tried chmod 400 and that didn't work. They couldn't write a file to the directory.
What permissions can I give / assign so that they can write a file but they can't read any other files? Remember, there are different directories that they will "write" the files to.
No doubt you can change file and directory permissions on files such that when you upload a file via ftp, it uploads fine but isn't visible to the uploader.
The titles says about everything. CD's are perfectly automounted.WhenI insert a DVD however (I tried various DVDs), absolutely nothing happens, as if I would have inserted nothing or a blank DVD.I already read lots of threads and nothing o help... Here are the outputs of a few commands that might or might not be useful.A line I added myself in fstab which appears completely useless:
Code: /dev/sr0 /media/dvd auto utf8,user,noauto,exec 0 0 Code:
